Sorry, the DVDO Controller-1 HDMI 2.0 In-Line Controller is no longer available. We've left this page up for reference only.
Please call us at 833-965-3722 immediately for the replacement product.
This DVDO Controller-1 HDMI 2.0 In-Line Controller is an HDMI in-line controller which supports resolutions up to 4K@60Hz (chroma sub-sampling 4:4:4 8-bit) and HDCP 2.2.
Its digital or analog audio output allows audio to be de-embedded from HDMI input and sent to audio distribution system, such as AVR or Zone Amplifier. Its rotary EDID switch has 15 EDID presets and can help negotiate the HDMI handshake in certain situations, such as an old HDMI display with DDC channel invalid, or DVI display with audio amplified requirement.
By auto-detecting input signal status, it could automatically trigger CEC commands to turn on or off TV with CEC support, pre-loaded RS232 commands to power on or standby projector, and to turn on or off projection screen through relay control.
DVDO Controller-1 HDMI 2.0 In-Line Controller Features:
- 18 Gbps HDMI pass-through
- Fully Supports and complies with HDMI 2.0a, HDR & HDCP 2.2
- HDMI Emulation
- Adjustable EDID management
- Locking power connector
- Analog and digital audio de-embedding
- Auto CEC command generation at presence of signal
- Auto serial command generation at presence of signal
- Auto relay switching at presence of signal
- PC tool for setup and command loading
- Auto signal re-generation and cable EQ
