The Crown DCi 4|600DA is a DriveCore Install amplifier with Dante / AES67 networked audio. Four-channel, DSP based Power Amplifier, 600W @ 4 ohms, 70V/100V with Dante / AES67 Networked Audio.
For applications that require Dante or AES67 networked audio, the Crown DriveCore Install DA Series provides a balanced combination of output power, channel count and speaker load flexibility along with proprietary DriveCore® technology for superb efficiency and exemplary audio quality. The DCi DA Series includes a high-powered DSP with JBL speaker tunings, network control/monitoring, and the ability to drive 2/4/8/16 ohm, 70V and 100V speaker loads. The amp’s advanced capabilities and support for Dante Domain Manager makes it perfect for installations that have standardized on Dante for networked audio transport.
The Soundweb Contrio EC-4B is an Ethernet wall controller for use in Harman HiQnet systems. The EC-4B can control and monitor parameters within BSS Audio Soundweb London and other HiQnet devices, including Crown DCi series amplifiers. The EC-4B is available in black or white, and in single-gang US Decora or single-gang EU form factor. The EC-4B contains a single Ethernet port for configuration, control, monitoring, and power via PoE. The EC-4B is configured via simple drag-and-drop operations within the software application HiQnet Audio Architect.
Crown DCi 4|600DA Features
- Dante / AES67 networked audio. This DriveCore Install DA model includes Dante / AES67 networked audio, as published by Crown.
- Integrated Dante / AES67 Networked Audio - Simplifies installation by enabling Dante / AES67 networked audio signals to be sent directly to the amplifier. Provides flexibility of installation options available with our expansive line-up of DriveCore Install amplifiers. Includes support for Dante 4.0 firmware for integration with Dante Domain Manager.
- Network Configuration, Monitoring & Control - Better monitoring, control and audio manipulation with the HiQnet protocol over standard TCP/IP network. The HiQnet Audio Architect software allows for remote configuration, monitoring, and control of all aspects of the DCi-DA Series amplifiers.
- Programmable General Purpose Input/Output Port - GPIO ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to third-party control system.
- Digital Signal Processing - DSP capabilities include the following:
- LevelMAX Limiters
- Input/Output EQ
- Matrix Router
- Speaker Line Monitoring
- Ships with the latest firmware. Crown publishes DCi DA host firmware and Crown Dante firmware for this series.
- 3-year manufacturer warranty. Crown's published warranty for this model is 3 years when purchased new from an authorized Harman Professional dealer in the United States. The warranty is not transferable. See Crown's warranty policy for full terms.
- Free USA Insured Shipping. This item ships free to US addresses with insured UPS Ground. Paid 2-day, 3-day, and overnight upgrades are available at checkout. International orders are charged shipping.
Where the DCi 4|600DA Fits
For applications that require Dante or AES67 networked audio, the Crown DriveCore Install DA Series provides a balanced combination of output power, channel count and speaker load flexibility along with proprietary DriveCore® technology for superb efficiency and exemplary audio quality. The DCi DA Series includes a high-powered DSP with JBL speaker tunings, network control/monitoring, and the ability to drive 2/4/8/1
Why not buy this Crown DCi 4|600DA Power Amplifier today?
Crown DCi 4|600DA Specifications
- Model: DCi 4|600DA
- SKU: Crown-DCI4X600DA
- Manufacturer part number: DCI4X600DA (distributor code DCI4X600DA-U-USFX)
- Type: Four-channel, 600W @ 4 ohms Power Amplifier with Dante / AES67 Networked Audio, and 70V/100V
- Channels: 4
- Dual-mode power, all channels driven: 300W at 2 ohms; 600W at 4 ohms; 600W at 8 ohms; 300W at 16 ohms; 600W at 70 Vrms; 600W at 100 Vrms.
- Frequency Response (8 ohms, 20 Hz - 20 kHz): ±0.25dB
- Total Harmonic Distortion (at full rated power, 20 Hz - 20 kHz): 0.35%
- Damping Factor (20 Hz to 100 Hz): >1000
- Load Impedance (Stereo/Dual Mode): 2 ohms - 16 ohms; 70Vrms and 100Vrms
- Load Impedance Bridge Mono: 4 ohms - 16 ohms; 140Vrms and 200Vrms
- Cooling: Continuously variable speed forced air, front to back airflow
- Maximum Fan Noise (re dBA SPL @ 1M): 45
- Required AC Mains (±10%): 100V-240V ~ 50/60Hz
- Power Connector: 15A IEC
- Unit dimensions (W x H x D): 483 mm x 89 mm x 362 mm (19 in x 3.5 in x 14.25 in)
- Official unit weight: 9.12 kg (20.1 lbs)
- Warranty: 3-year manufacturer warranty as published by Crown for this model
- UPC: 691991010132
- Country of origin: MX
- TAA: Compliant
Specifications above that describe electrical performance, unit size, and unit weight are from Crown's official DCi 4|600DA product page or official series data sheet. Call 833-WOLFPACK (833-965-3722) if you need help confirming a figure.
Why not buy this Crown DCi 4|600DA Power Amplifier today?
How to Control the DCi 4|600DA
- Network / software control: HARMAN HiQnet Audio Architect is used with this series, as published by Crown.
- Dante: This model includes Dante networked audio. Use Dante Controller along with Crown's published setup notes for Dante firmware and routing.
Why not buy this Crown DCi 4|600DA Power Amplifier today?
Crown DCi 4|600DA Manuals
These are the official Crown documents, hosted here for convenient download. Other drawings, power-draw sheets, or translations may also be listed on Crown's DCi 4|600DA product page.
Need a copy now? Call 833-WOLFPACK (833-965-3722) and we will email the official manual to you.
Why not buy this Crown DCi 4|600DA Power Amplifier today?
Crown DCi 4|600DA Power Amplifier Q&A
What is the DCi 4|600DA?
What is the DCi 4|600DA?
The Crown DCi 4|600DA is a four-channel, 600W at 4 ohms power amplifier with Dante / AES67 networked audio, 70V/100V. The specifications on this page come from Crown's official product page and data sheets.
Does the DCi 4|600DA include Dante?
Does the DCi 4|600DA include Dante?
Yes. This DriveCore Install DA model includes Dante / AES67 networked audio, as published by Crown.
What is the official unit weight of the DCi 4|600DA?
What is the official unit weight of the DCi 4|600DA?
Crown's official specifications list a unit weight of 9.12 kg (20.1 lbs). Official unit dimensions: 483 mm x 89 mm x 362 mm (19 in x 3.5 in x 14.25 in).
What warranty comes with the DCi 4|600DA?
What warranty comes with the DCi 4|600DA?
Crown's published Limited Product Warranty, updated August 2025, lists 3 years for this model when purchased new from an authorized Harman Professional dealer in the United States. The warranty is not transferable. Call 833-WOLFPACK (833-965-3722) if you have questions.
Does Crown publish firmware for the DCi 4|600DA?
Does Crown publish firmware for the DCi 4|600DA?
Crown publishes DCi DA host firmware and Crown Dante firmware for this series.
How much power does the DCi 4|600DA deliver?
How much power does the DCi 4|600DA deliver?
Crown rates the DCi 4|600DA at 300W at 2 ohms, 600W at 4 ohms, 600W at 8 ohms, 300W at 16 ohms, 600W at 70 Vrms, 600W at 100 Vrms, per channel in dual mode with all channels driven.
Can the DCi 4|600DA drive 70V or 100V speaker lines?
Can the DCi 4|600DA drive 70V or 100V speaker lines?
Yes. Crown lists dual-mode load options of 2 to 16 ohms, 70Vrms and 100Vrms, and bridge-mono load options of 4 to 16 ohms, 140Vrms and 200Vrms.
Does the DCi 4|600DA have DSP and speaker tunings?
Does the DCi 4|600DA have DSP and speaker tunings?
Yes. Crown says the DCi DA Series includes a high-powered DSP with JBL speaker tunings, plus network control and monitoring.
Where can I buy the Crown DCi 4|600DA online?
Where can I buy the Crown DCi 4|600DA online?
You can buy the Crown DCi 4|600DA from HDTV Supply at hdtvsupply.com. It ships free to US addresses with insured UPS Ground, and paid 2-day, 3-day, and overnight upgrades are available at checkout. Questions before you order? Call 833-WOLFPACK (833-965-3722) or use Chat With an AV Expert.
Is the DCi 4|600DA a good amp for a Dante or AES67 system?
Is the DCi 4|600DA a good amp for a Dante or AES67 system?
Yes. Crown made the DriveCore Install DA Series for applications that need Dante or AES67 networked audio, with DSP, JBL speaker tunings, and network control and monitoring. We offer free system design help for networked audio. Call 833-WOLFPACK (833-965-3722) or use Chat With an AV Expert on hdtvsupply.com.
Crown DCi analog vs N vs DA: which should I buy?
Crown DCi analog vs N vs DA: which should I buy?
Analog DCi models like the DCi 4|600DA take analog inputs and keep things simple. N (Network) models add BLU link, HiQnet network monitoring and control, GPIO, and DSP. DA models add Dante / AES67 networked audio with DSP and JBL speaker tunings. If you are not sure which your system needs, we can help you choose.
Can HDTV Supply help me design a system with the DCi 4|600DA?
Can HDTV Supply help me design a system with the DCi 4|600DA?
Yes. We offer free system design help. Tell us about your rooms, speakers, and sources, and we will help you confirm the right Crown amplifier, wiring, and accessories before you buy. Call 833-WOLFPACK (833-965-3722) or use Chat With an AV Expert on hdtvsupply.com.
