This Component Video to CAT5 Balun features three gold plated male RCA connectors on the end of 8" pigtails color coded red, green and blue. Additionally, a female orange RCA connector provides path for digital audio (SPDIF).
This Component Video to CAT5 Balun Includes is a hook and loop tape set which allows direct attachment to the rear of a plasma and other monitors. Cat5 connection is a single female RJ45 jack.
Note: All baluns are sold individually, and must be used in pairs. This Component Video to CAT5 Balun may be mated with Item #MCM507720.
Actual usable maximum distance between these baluns will vary on a number of factors including strength of signal, quality of terminations and local sources of interference. The distances listed are based on use of Cat5 cable, and should be
considered an absolute minimum. Depending upon the size of the video monitor, and level of required video signal, usable distances will likely be much greater. Distances will increase with Cat5e, Cat6 or higher rated cable.
Why not buy a pair of Component Video to CAT5 Baluns today?
Component Video to CAT5 Balun Model Distance:
MCM507710 = 1000
MCM507720 = 400
MCM507722 = 400'
MCM507725 = 1000
MCM507730 = 400
MCM507724 = 1000
MCM507732 = 1000
Wiring: Note that pairs exist between pin #4/5, #3/6, #1/2
and #7/8. When looking at an RJ45 connector from the bottom, with the spring tab facing down, pin #1 will appear on the left.