Bogen Communications M450 M-Class 450W Power Amplifier

Bogen Communications

$1,642.48
Part Number:
M450
Availability:
In stock
1:
3 Modes: Stereo, Mono, and 70V Mono
2:
70V Mono Output: 900W at 5.5 Ohms
3:
2 Independent Fans for Quiet Cooling
4:
Stereo Output: 450W at 4 Ohms
5:
Free USA Shipping
6:
Authorized Bogen Direct Warranty
8:
Save 5% with check or wire transfer

This Bogen Communications M450 M-Class 450W Power Amplifier is an amplifier that produces 450W of stereo or 900W of mono output power. This powerful amp allows installation of up to 2 input modules. These modules can be used for a variety of professional installations and can accept inputs from microphones, telephone systems, stereo sources, mono sources, the daisy-chaining of amplifiers for sound reinforcement applications, and more. A single standard input module with screw terminal inputs is supplied.

The M450 relies on a massive power toroidal transformer and is built for solid performance with low distortion and a high slew rate. Output module circuitry is located away from input module circuitry, minimizing noise and ground loops. The amplifier requires little maintenance and cleaning, as internal electronic components are located outside of the forced air-stream flow. Front-mounted fan filters provide easy removal and cleaning.

The M-Class amplifier is enclosed in a heavy-duty, 14-gauge chassis. Three modes of operation are available including 70V mono, dual mono, and stereo. This full-featured amp is packaged in only 2 rack spaces and can be stacked above or below without requiring extra ventilation space. The M450 M-Class Power Amplifier includes two grilles with filters, a control knob cover, four rubber feet with screws, two rack ears, and the aforementioned pre-installed balanced input module.

Bogen Communications M450 M-Class 450W Power Amplifier Features:

  • 3 selectable low-frequency roll-off filter choices: Flat /65 Hz /125 Hz
  • 2 x 1 mixer function when in mono modes
  • Post- and Pre-EQ output feeds (in mono mode)
  • Low noise, Low distortion
  • Recessed volume control knobs
  • Post- and pre-EQ output feeds (in Mono mode)
  • Enable from 1-6 zones for music or paging
  • DC, overload, and thermal protection circuits
  • Back-slope AC voltage stabilization provides dependable performance even with varying AC line voltages

Why not buy this Bogen Communications M450 M-Class 450W Power Amplifier from HDTV Supply today?

Bogen Communications M450 M-Class 450W Power Amplifier Specifications:

  • Amplifier
    • Number of Channels: 2
    • Amplifier Power Rating:
      • 70 V: 900 W Bridged
      • 4 Ohms: 450 W per Channel
      • 8 Ohms: 300 W per Channel
    • Load Impedance / Voltage: 4 Ohms/70 V
  • Performance
    • Frequency Response: 20 Hz to 20 kHz ±0.25 dB
    • Input Sensitivity: 1.01 V (at 4 Ohms)
    • SNR: 106 dB (at 8 Ohms)
    • THD: < 0.02%
  • Signal Processing
    • Filters: High-Pass
  • Connectivity
    • Analog Audio I/O:
      • 1x Screw Terminal Balanced Input
      • 1x Barrier Strip 5-Pin Output
      • 1x 2RCA Output
  • Power
    • AC Input Power: 95 to 130 VAC, 60 Hz
    • Current Consumption: 12 A
  • Physical
    • Display & Indicators: LED (Clip/Limit/Signal/Status)
    • Cooling: FM: Fan (Variable Speed)
    • Dimensions: 17.0 x 3.5 x 18.5" / 43.2 x 8.9 x 47.0 cm
    • Weight: 44 lb / 20 kg
  • Packaging Info
    • Package Weight: 48 lb
    • Box Dimensions (LxWxH): 24 x 23 x 9"

Why not buy this Bogen Communications M450 M-Class 450W Power Amplifier from HDTV Supply today?