This Blustream UEX100E-KIT Advanced USB 2.0 HDBaseT(TM) Extender Set - 100m utilizing HDBaseT??technology to extend USB 2.0 data, 2ch analog audio, and control signals up to 100m over a single CAT cable.
The UEX100E-KIT allows up to 4x USB devices to be connected to a single USB host with support for a combined transmission data bandwidth of up to 480Mbps, and is backwards compatible with USB 1.1 devices.
The UEX100E-KIT also provides bi-directional Power over Cable (PoC), bi-directional IR, RS-232, 2ch analog audio, and 100Mbps Ethernet/LAN pass through.
Blustream UEX100E-KIT Advanced USB 2.0 HDBaseT(TM) Extender Set - 100m Features:
- Extends USB up to a distance of 100m over a single CAT cable using HDBaseT??technology*
- Supports USB 2.0 signal extension
- Backwards compatible with USB 1.1 devices
- Transmitted data bandwidth up to 480Mbps (combined)
- 1 x USB-B port on the receiver for connection to host device
- 4 x USB-A ports on transmitter for connection to devices
- USB-A ports 1-2 support 5V 1A, USB-A ports 3-4 support 5V 500mA
- Bi-directional Ethernet pass-through (100Mbps)
- Bi-directional IR & RS-232 pass through
- Supports 2ch PCM Analog Audio pass through (direction selectable)
- Bi-directional PoC (Power over Cable) to power extenders from either the transmitter or receiver
- Simple plug and play, no driver installation or setup required
Why not buy this Blustream UEX100E-KIT Advanced USB 2.0 HDBaseT(TM) Extender Set - 100m today?
- UEX100E-RX
- CAT Connector: 1 x RJ45 connector, female
- USB Port: 1 x USB-Type B
- Audio Input/Output Connector: 1x Analog L/R audio (3.5mm stereo jack)
- Ethernet Port: 1 x RJ45 connector, female
- RS-232 Serial Port: 1 x 3-pin Phoenix connector
- IR Input Ports: 1 x 3.5mm stereo jack
- IR Output Ports: 1 x 3.5mm mono jack
- Config Switch: 2-pin DIP switch
- UEX100E-TX
- CAT Connectors: 1 x RJ45 connector, female
- USB Ports: 4 x USB-Type A
- Audio Input/Output Connector: 1x Analog L/R audio (3.5mm stereo Jack)
- Ethernet Port: 1x RJ45 connector, female
- RS-232 Serial Port: 1x 3-pin Phoenix connector
- IR Input Ports: 1x 3.5mm stereo jack
- IR Output Ports: 1x 3.5mm mono jack
- Config Switch: 2-pin DIP switch
- Power Supply: 24V/1.25A DC
- Product Dimensions (W x D x H ): 150mm x 100mm x 25mm (TX/RX)
- Shipping Weight: 1.6kg
- Operating Temperature: 32?F to 104?F (-5?C to +55?C)
- Storage Temperature: -4?F to 140?F (-25?C to +70?C)
Why not buy this Blustream UEX100E-KIT Advanced USB 2.0 HDBaseT(TM) Extender Set - 100m today?
Blustream UEX100E-KIT User Manual
Blustream UEX100E-KIT Datasheet
