This Blustream DA11USB Dante? USB Audio Encoder / Decoder has been designed to both encode 2ch USB audio to a Dante® digital signal, and decode a Dante® digital signal to 2ch USB audio.

The DA11USB features both USB Type-B and USB-C connections, selectable via a switch, and is a plug & play device that is powered either using PoE (Power Over Ethernet), or with 5V from the USB device. The DA11USB also supports AES67 RTP audio transport.

Blustream DA11USB Dante? USB Audio Encoder / Decoder Features:

Encodes 1ch USB audio to Dante® digital signal
Decodes a Dante® digital signal to USB audio
Selectable USB audio between USB Type-B and USB-C inputs
Compliant with USB Audio Device Class Specification V1.0
Supports 44.1 & 48 KHz sample rates @ 16 Bit
Configurable Dante® device latency (supports 1, 2 or 5ms configurable using Dante® Controller)
Supports AES67 RTP audio transport
Features Class 3 IEEE 802.3af PoE for powering of product from any PoE switch
Supports power via 5V USB for when network switch does not support PoE

*Dante® is a registered trademark of Audinate Pty Ltd

Why not buy this Blustream DA11USB Dante? USB Audio Encoder / Decoder today?

Blustream DA11USB Dante? USB Audio Encoder / Decoder Specifications:

Audio Input Connectors: 1x RJ45, female (100Mbps Dante® network), 1x USB Type B female, 1x USB Type C female
Audio Output Connectors: 1x RJ45, female (100Mbps Dante® network), 1x USB Type B female, 1x USB Type C female
Casing Dimensions (W x H x D): 120mm x 26mm x 47mm
Shipping Weight: 0.3kg
Operating Temperature: 32°F to 104°F (0°C to 40°C)
Storage Temperature : -4°F to 140°F (-20°C to 60°C)
Power Supply: Class 3 IEEE 802.3af PoE, or 5V USB