Avenview DVI-C5-M-SET DVI Extender over Single CAT5 Mini SET
The Avenview DVI-C5-M-SET, DVI over Single CAT5 Extender Mini extends your PC's DVI transmission distance up to 80' (25m) at 1024x768 and 50' (15m) at 1920x1200 resolutions. With DVI-C5-M-SET, users can transmit high quality digital video of PC applications through one cost effective CAT-5/5e LAN cable to the remote monitor or projector, instead of using short and expensive DVI cables. With embedded EDID inside the adapter, your PC will continue to send the digital video even when the monitor is not connected. The user can then disconnect the monitor, place it in a remote location and reconnect it without rebooting the operating system.
NOTE: This product has been discontinued. See the above SIMILAR Tab for equivalent products or, if not there, call us at 800-841-9238 right now to discuss your needs.
The DVI-C5-M-SET includes two units: transmitting and receiving. The transmitting unit is connected to your PC's DVI output and the receiving unit is connected to the monitor. While successfully connected, the two LED lights on the RJ-45 connector will blink. The transmission distance between the sending (transmitter) and receiving units (receiver) can be up to 80' (25m) at XGA (1024x768) and 50' (15m). With compact size, DVI-C5-M-SET is the most cost effective choice for bringing your impressive digital video to the remote display.
Avenview DVI-C5-M-SET DVI Extender over Single CAT5 Mini SET Features:
DVI 1.1 compliant
Extends the transmission length from the sources up to 80' (25m) at 1024x768 and 50' (15m) at 1920x1200
Units can used as Transmitter or Receiver
Receiving unit can learn EDID information for DVI enabled display device
Direct plug-in at Transmitter and Receiver
Why not buy this Avenview DVI-C5-M-SET DVI Extender over Single CAT5 Mini SET today?
Avenview DVI-C5-M-SET DVI Extender over Single CAT5 Mini SET Specifications:
DVI Compliance: 1.1
Video Bandwidth: Single Link 165 MHz (4.95Gbps)
Resolution and Distance:
1920x1200 @ 60Hz: ~ 50' (15m) (CAT5e)
1024x768: ~ 80' (25m) (CAT5e)
Audio Support: No
Input TMDS Signal: 1.2 Volts (peak-to-peak)
Input DDC Signal: 5 Volts (peak-to-peak, TTL)
Transmitter: 1 x DVI
Receiver: 1 x RJ45
Transmitter: 1 x RJ45
Receiver: 1 x DVI
DVI Connectors: DVI-I (29-pin male digital only)
RJ45 Connector: WE/SS 8P8C with 2 LED indicators
Dimensions (L x W x H): Transmitter: 2.0 x 1.6 x 0.8"