null

ATEN VE1812T HDMI HDBaseT Transmitter with POH

$478.00
Part Number:
VE1812T
Availability:
Contact us for availability
1:
HDMI HDBaseT Transmitter with POH
2:
HDBaseT Connectivity – extends an HDMI connection over a long distance via one Cat 5e / 6 / 6a cable
3:
Supports HDBaseT Long Reach Mode – Up to a maximum range of 150 meters @ 1080p
4:
POH (Power over HDBaseT) – supplies power from Transmitter to Receiver over a long distance via one Cat 5e / 6 / 6a cable
5:
Free Shipping & 3-Year ATEN Warranty
6:
Lifetime Telephone, CHAT, TEXT & Email Support
7:
Add'l Discount to .EDU & .GOV & .MIL & .ORG
ATEN VE1812T HDMI HDBaseT Transmitter with POH (4K@100m) (HDBaseT Class A)

ATEN VE1812T HDMI HDBaseT Transmitter with POH (4K@100m) (HDBaseT Class A) which sends power from Tx to Rx over Cat 5e / 6 / 6a cable without any additional power supply. The VE1812T supports RS-232 and IR signaling pass-through, allowing you to control the HDMI source device from the receiver unit (VE1812R) while also accessing the HDMI display device from the transmitter unit (VE1812T). The IR signals can also be extended in both directions.

The VE1812T HDMI HDBaseT Transmitter with POH is HDMI (3D, Deep Color, 4kx2k) and HDCP compatible. When transmitting HDMI / 4K with a Cat 6a or ATEN 2L-2910 Cat 6 cable, the maximum distance can reach up to 100 meters. With Long Reach Mode enabled, the VE1812T can extend HDMI signal up to 150m @1080p. The VE1812T is perfect for digital classrooms, video conference rooms, gaming or any installation that requires superior video quality.

ATEN VE1812T HDMI HDBaseT Transmitter with POH (4K@100m) (HDBaseT Class A) Features:

  • HDBaseT Connectivity – extends an HDMI connection over a long distance via one Cat 5e / 6 / 6a cable
  • Supports HDBaseT Long Reach Mode – Up to a maximum range of 150 meters @ 1080p
  • 4k x 2k HDMI transmission distance up to 100m over Cat 6a or ATEN 2L-2910 Cat 6 cable
  • HDBaseT Anti-jamming – resists signal interference during high - quality video transmission using HDBaseT technology
  • POH (Power over HDBaseT) – supplies power from Transmitter to Receiver over a long distance via one Cat 5e / 6 / 6a cable
  • Bi-directional RS-232 channel – allows you to connect to serial terminals or serial devices, such as touch screens and barcode scanners
  • Bi-directional IR channel – Two way IR protocol delivery by one IR port; IR transmission is processed one direction at a time
  • Rack- Mountable

ATEN NOTE: HDTV Supply supports our Federal, State & Local Governments, Schools, Universities & Military accounts by offering an additional discount if your email address ends in .EDU & .GOV & .MIL & .ORG. Please see Options below.

Why not buy this ATEN VE1812T HDMI HDBaseT Transmitter with POH (4K@100m) (HDBaseT Class A) today?

ATEN VE1812T HDMI HDBaseT Transmitter with POH (4K@100m) (HDBaseT Class A)

  • Video Input
    • Interfaces: 1 x HDMI Type A Female (Black)
    • Impedance: 100 Ώ
    • Max. Distance: 1.8 m
  • Video
    • Max. Data Rate: 10.2Gbps (3.4Gbps per lane)
    • Max. Pixel Clock: 340 MHz
    • Compliance: HDMI (3D, Deep Color, 4K), HDCP Compatible, Consumer Electronics Control (CEC)
    • Max. Resolutions / Distance:
      • Up to 4K@70m (Cat 5e/6) / 100m (Cat 6a/ATEN 2L-2910 Cat6); 1080p@100m (Cat 5e/6/6a)
      • *4K supported
      • 4096 x 2160 / 3840 x 2160 @ 60Hz (4:2:0);
      • 4096 x 2160 / 3840 x 2160 @ 30Hz (4:4:4)
  • Audio
    • Input: 1 x HDMI Type A Female (Black)
  • Connectors
    • Unit To Unit: 1 x RJ-45 Female
    • Power: 1 x DC Jack (Black) with locking
  • Control
    • RS-232: Connector: 1 x Terminal Block, 3 pole
    • Baud Rate: 19200, Data Bits:8,
    • Stop Bits:1, no parity and flow control
    • IR: 1 x Mini Stereo Jack Female (Black)
  • Switches
    • Long Reach Mode Switch: 1 x Slide Switch - ON/OFF
    • Firmware Upgrade: 1 x Slide Switch - ON/OFF
    • Power Consumption: TBD
  • Environmental
    • Operating Temperature: 0 - 40˚C
    • Storage Temperature: -20 - 60˚C
    • Humidity: 0 - 80% RH, Non-Condensing
  • Physical Properties
    • Housing: Metal
    • Weight: 0.47 kg ( 1.04 lb )
    • Dimensions (L x W x H) with bracket: 14.04 x 12.30 x 3.00 cm, (5.53 x 4.84 x 1.18 in.)
    • Dimensions (L x W x H) without bracket: 13.60 x 10.10 x 2.90 cm, (5.35 x 3.98 x 1.14 in.)
    • Note: For some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format.
Tawk.to