WolfPack 4K 1x2 HDMI Splitter with Audio Extractor & Up Down Scaler


Part Number:
Contact for Availability
4K 1x2 HDMI Splitter w/Audio Extractor & Up/Down Scaler Supports 1080p to 4K upscale & 4K to 1080p downscale Supports HDCP 2.2 converted to HDCP 1.4 Supports 4K 4:4:4 converted to 4:2:0. Supports HDR, HDMI 2.0
Supports HDCP 2.2, 4K@60Hz 4:4:4 @ 18Gbps
Supports HDMI audio deembedding
HDTV Supplys 4K 1x2 HDMI Splitter with Audio Extractor & Up Down Scaler allows you to extract 4K HDMI for both digital optical S/PDIF (Toslink) and stereo analaog audio signal for use by an amplifier or AV receiver. With a special feature to do upscale 1080p signal up to 4K or Downscale 4K signal to 1080p. Full OSD operation by using 5 way joystick switches for easy set up and doing EDID management. It is a perfect solution for integrating a 4K source into a 1080P HD system or vice versa.

The output HDCP is based on your TV monitor:

  • If your monitor is HDCP 1.4 then the output will be HDCP 1.4
  • If your monitor is HDCP 2.2 then the output will be HDCP 2.2

4K 1x2 HDMI Splitter with Audio Extractor & Up Down Scaler Features:

  • Support HDMI 2.0, HDCP 2.2, 4K@60Hz 4:4:4 18Gbps(6Gbps per color) 3D & HDR.
  • Support extracts the 4K HDMI audio and output to a multi-channel digital or analog audio signal.
  • Allows you to route HDMI audio simultaneously via S/PDIF and 3.5mm stereo audio outputs.
  • HDMI audio output: LPCM7.1@192KHz, Dolby TrueHD, DTS-HD MA.
  • Input: HDMI x 1, Output: HDMI x 2, Optical out x 1, analog stereo out x 1.
  • Support uncompressed audio such as LPCM.
  • Support 1080p to 4K upscale and 4K to 1080p downscale.
  • Support HDCP 2.2 convert to HDCP 1.4.
  • Support 4K 4:4:4 convert to 4:2:0.
  • Audio output support: up to 7.1 channel
  • Support CEC pass-through
  • Built in EDID management, 2/5.1/7.1 patched EDID.
  • Built in 5 way joystick switch for full OSD operation.

Why not buy this 4K 1x2 HDMI Splitter with Audio Extractor & Up Down Scaler today?

4K 1x2 HDMI Splitter with Audio Extractor & Up Down Scaler Features:

  • 1 - HDMI Input: HDMI Type A
  • 2 - HDMI Output: HDMI Type A
  • HDMI Video Support: Up to 4096x2160/60Hz/4:4:4(18Gbps) 、 3D、 and HDR
  • HDMI Audio Support: Up to 7.1 LPCM 192KHz / Dolby TrueHD / DTS-HD MA
  • Digital Audio Connector: 1 - TOSLINK
  • Analog Audio Connector: 3.5mm Phone Jack x 1
  • Firmware updated Interface: DB9(F) / 3.5mm STEREO PHONE JACK
  • Power Supply: Regulated DC5V / 1A
  • Power Consumption: 4W
  • Temperature: Operation:-10~45℃, Storage:-30~70℃,Humidity:up to 95%
Click here for Firmware Link.
Q: Can I use the to split 4k source so that 1 HDMI connects to a 4KTV and the other to a non-4KTV?

Q: Does this support HDCP 2.2 inputs as there are many HDCP 2.2 sources and HDCP 2.2 TVs now in the U.S.?

Q: Will in down convert to HDCP 1.4 with an HDCP 2.2 input?

Q: This product has CEC, what is CEC?
This product features CEC (Consumer Electronics Control) allowing your HDTV's remote to manage up to ten devices that are connected via HDMI (such as Blu-ray Disc players or home theater receivers) with no special programming needed. For example, you can use your remote to turn on your TV, your player, and your receiver at the same time, and adjust the system volume with one button. All devices must support CEC, though.

Most major TV manufacturers now support CEC, and an HDTV with HDMI 1.3 will likely have the technology. Manufacturers call it by different names; LG Electronics, for instance, calls its implementation SimpleLink, whereas Toshiba calls its version CE-Link. Interoperability isn't mandatory, so some manufacturers limit control to their own products; Sony, for one, allows only Sony-to-Sony communication.