3 - 2D and 3D HDMI 1.4 inputs and one HDMI 1.4 output
1 - VGA + R/L audio input (2D only)
all 7 converted to 1 - switchable pass-through HDMI 1.4 output
Small size, only 8" wide, 1.5" high and 3 inches deep
Pass-through means whatever resolution comes in, goes out like a 1080p Blu-ray signal comes in, goes out at 1080p. A cable box resolution of 1080i goes in, comes out as 1080i
Manual switching button or use its remote control
IR extension cable - you can put the unit behind doors and run the IR cable outside the door
3D supported on the HDMI 1.4 inputs
Supports both HDMI audio and HDMI video
HDCP 1.2 and HDMI 1.4 compliant
Mounting plates supplied
Accessing cables behind the TV is becoming very difficult, and with too many cables behind TV will break the principle of the original design, simple and neat. This 7X1 HDMI Multi-switch will be a solution as all the sources can now be connected to this 3D switcher then the HDMI output can be connected to the TV. It will let the cabling to the TV easy and clean.
HDTV Supply is a leader in supplying 3D equipment for this new, fast growing 3DTV market. Our test lab includes the latest equipment for designing, testing and supporting 3D video equipment. The chips sets we use support the below 3D formats and work with many of our HDMI 1.3 and HDMI 1.4 compliant devices. This device supports these 3D formats:
Side-by-Side 3D Format
Top-and-Bottom 3D Format
Blu-ray 3D Format
We not only test this device with lab equipment we also test many of our 3D devices with 3D products you are likely to use:
Sony PS3 with the 3D 3.41 firmware
Samsung model PN50C7000YF 3DTV
Samsung model BD-C6900 3D Blu-ray player FORCED to 1080p
Samsung model SSG-P2100T 3D glasses
DirecTV models HR21-100 and the HR24 high definition receiver.
It works with all HDMI devices including the new 3D units.
The 3D viewing results were awesome in our lab and did not have any picture or audio degradation. The normal and standard (2D) results equally exhibited a superb picture quality.
HDTV Supply includes a 1 Year Limited Warranty on this 7X1 HDMI Multi-switch. The warranty states that (a) its products (the "Product") will perform substantially in accordance with the accompanying written materials for a period of 1 year from the date of receipt and (b) that the Product will be free from defects in materials & workmanship under normal use & service for a period of 1 year. In order to get a warranty replacement for a defective item, HDTV Supplys Support Team will verify the product is eligible for warranty. An RMA number will then be issued. Shipped replacements will be in like new conditions, tested and all components included.
HDTV Supply also sells a 3 and 5 Year Extended Warranty for this product. Please go to Extended Warranties or see the above Options to purchase it.
Ask a Question
Questions & Answers
Ask a question about the 7X1 HDMI Multi-switch - 2D & 3D & HDMI 1.4 or Call 833-WOLFPACK (833-965-3722)