This WolfPack 4K 30 Hz HDMI Over IP Matrix Switcher with Apps family sends & receives a 4K 30 Hz HDMI video/audio signal to up to 450 feet in a 4K 30 HDMI format with CAT6.
It includes multiple POE HDMI 4K Transmitters (TX) and POE 4K HDMI Receives (RX).
They are installed using 1 piece of a twisted pair CAT6/7 cable and are transmitted digitally over that single cable without any signal loss.
It is a true AV Over IP matrix switcher allowing any input to be routed to any output; or the same input to be routed to all outputs, or any combination
Internal formats of MPEG4-AAC and LPCM stereo adapt to available network bandwidth if needed.
It supports both H.264 & H.265 (switchable).
Since this uses H.264/265 technology our 4K AV over IP system total bandwidth is 1G.
Either with 4K30 input or Quad-view outputs, the total bandwidth never exceeds 1G.
4K 30 Hz HDMI Over IP Matrix Switcher with Apps Features:
- Real Time Video Preview of all Sources on any Wireless Tablet
- Real time video seen on a tablet
- 4K 30 Hz AV Over IP Technology with Live Streaming
- Video Wall Support to any size or quantity of TVs
- Supports Multi-view
- Uses one extender for TX and RX (setup in PC software)
- Unlimited Sources
- Unlimited Computers
- Unlimited KVM
- Unlimited HDMI In & Out
- Any In to Any Out
- Wireless iPad and Android Tablet control
- Any size video walls
- Any quantity video walls
- Optionally 90°, 180° & 270° rotation
- USB support
- Uses CAT6 for conection
- No Monthly License fees
- Extends a 4K 30 Hz signal to 300' w/CAT6
- H.265 protocol
- SEC Security Compliance
- HDCP 1.4 & HDMI 1.4 compliant
- 4K 30 Hz video over 1G Switch
- 80ms Switching & Latency
- Separate Audio Outs
- Scalable Ins & Outs
- Rack mountable (Rack Mount Available)
- Windows Software Support
- Unlimited Field Upgradeable
Our 4K 30 Hz HDMI Over IP Matrix Switchers also supports 4K30 KVM. Also, unlike a traditional card cage matrix, you only buy the exact input and output combination you need, saving you money by not buying unused ports.
The unique feature of these 4K 30 Hz HDMI Over IP Matrix Switchers are that the transmitter and receivers are the same unit, and you just select what you want them using the PC software.
These WolfPack 4K HDMI Over IP Switchers use the H.265 technology to work together with WolfPack 4K Transmitters (POE Encoders) and 4K Receivers (POE Decoders) to provide a complete end-to-end streaming system. They can also provide a video wall up with input and output HDMI resolutions supporting up to 4K 30 Hz. .
Features That Separate our WolfPack 4K 30 Hz HDMI Over IP Matrix Switchers with Apps from the Competition:
- Wireless Real Time Video Preview: See the video on the iPad what is showing on the TVs, or from the sources, with its App
- Any in, to any out, in any combination
- Includes Video Wall Processing
- Consists of 4K Transmitters, 4K Receivers & 4K Ethernet Switch (all POE)
- Support 1-HDMI output with Video Wall function (Maximum 16-windows on one screen)
- Supports 1-3.5mm audio input and 3.5mm audio output
- Supports 1-RJ45 (10M/100M/1000M) with POE function
- Supports 1-RS232, 1-485 port and 4-I/O ports
- Supports 2-USB 1.1 and 1-USB A
- The resolution up to 4K 30Hz & 1080p @ 60hz for HDMI, D1@60, CIF@60fps
- Add, remove & relocate sources & TVs at anytime
- Android Tablet App (XView)
- iOS Tablet App (XView)
- Supports Windows Compatible & Software (XView)
- POE design so it doesn't require AC adapters
- Static IP sets the IP addresses
- Extends the signal 300' in & out of the Ethernet switch with CAT6/5e
- Extends the signal 450' in & out of the Ethernet switch with CAT6/7
- Switchable H.264 or H.265 protocol for the best picture
- HDMI 2.0 & HDCP 2.2 Compliant
- 4K 30 Hz video over a 1G Switch
- Supports resolutions up to 4K 30 Hz at a colorspace of 4:2:0
- 80-100ms Latency
- 80-100ms Switching Time
- Separate audio
- Supports scalable in & out matrix configurations
- Field Upgradeable
Wireless iPad Real Time Video Preview of Every Source Device: Along with the other major features like POE, separate audio and creating video walls, a key feature is our Wireless iPad Real Time Video Preview. That means if you build your own matrix and pick the optional wireless iPad control your iPad will show in real time the videos that are on, say, all your DirecTV receivers...again, all of them. If you have 12-DirecTV receivers all set to different channels you'll see 12 different real-time videos, not pictures, real-time video. .
If it is a DVD playing, you'll see that real time video also. This wireless iPad real time video preview sets us apart from all the other lame ducks who make you run to the TVs to see what's playing. Only at HDTV Supply can you get this feature. If you need to change the channel just then go to your DirecTV receiver and change it as you no longer must run out to your sports bar floor, factory, or other installations to see whether it changed or not..
The HDMI Receiver Over IP allows you to simultaneously support an HDMI 1.4 Signal (including 4K 30 Hz) to one or more TVs, HDMI video projectors or LCD Panels using one CAT6/7 cable over a standard Ethernet infrastructure.
Internal Video Wall Processor: Not only is this product an HDMI matrix switch, but it is also specifically designed to support the video wall configurations below.
Our WolfPack 4K HDMI Over IP Matrix Switchers uses TCP/IP network technology and can have a full HD HDMI signal transmitted and distributed to 100m or 300 feet with CAT6/5e and 400 feet with CAT6/7. The local and remote units can be connected for a point-to-point connection, or through VLAN isolation on a managed network switch for a multipoint-to-multipoint configuration.
Example 1: Create a 2x2 Video Wall using 4-TVs with either one large picture or 4-individual pictures at one, or multiple locations.
Example 2: Create a 3x3 Video Wall using 9-TVs with either one large picture or 9-individual pictures at one, or multiple places.
Fast Seamless HDMI Switching: These HDMI over IP Matrix Switchers deliver instantaneous video switching with full 4K 30 Hz video at each port. .
This high-performance engine processes HDMI signals by executing EDID hops and HDCP handshakes simultaneously at both the source input, the display outputs and scales the inputs for the best output resolution. It sets the output clock timing and uses a frame buffer to retain the input signal information for the fastest output.
Separate Embedded Audio In and De-embedded Audio Out: These HDMI over IP Matrix Switchers allow you to display video with separate audio coming from another audio source as it supports embedding the audio on the HDMI TXs connector and then de-embedding the audio on the HDMI RXs connector.
EXAMPLE: Build a WolfPack 4K 12x32 HDMI Over IP Matrix System with Video Wall, Real Time Video Preview, Fast Switching & Separate Audio:
- 14 - 4K POE HDMI to IP Transmitters extending to 450 feet with CAT6
- 32 - 4K POE HDMI to IP Receivers extending to 450 feet with CAT6
- 1 - Rack mount 48-Port 1G IGMP POE Ethernet switch
- 1 - Wireless Access Point
- 2 - Rack mount kits for up to 12-TXs or RXs
Why not buy a 4K POE HDMI Over IP Matrix w/Real Time iPad Video Preview & Video Walls today?
4K HDMI TX or 4K RX Over IP Specs:
- Resolutions Supported:
- 640 x 480@60Hz
- 480p@60Hz,
- 576P@50Hz,
- 800 x 600@60Hz,
- 1024 x 768@60Hz,
- 720p@50Hz, 720p@60Hz,
- 1280 x 800@60Hz,
- 1280 x 1024@60Hz,
- 1366 x 768@60Hz,
- 1400 x 1050@60Hz,
- 1440 x 900@60Hz,
- 1680 x 1050@60Hz,
- 1920 x 540@60Hz,
- 1080p@24Hz,
- 1080p@25Hz,
- 1080p@30Hz,
- 1080p@50Hz, 1080p@60Hz
- 4K@30 Hz
- HDMI 1.4 and HDCP 1.4
- POE or can be powered using provided power supply
- Software for IP address, video wall, EDID etc settings
- Supports to rename the sources and displays
- 3.5mm audio embedded and de-embedded on TX and RX
- EDID preset/learning
- Low latency About 50 ms (Low latency mode) & About 250 ms (High quality mode)
- Supports both a Video Wall mode and a matrix switch mode
- Supports iPad and Android APP control with preview function
4K HDMI TX or 4K RX Over IP Set Includes:
- 1 - 4K HDMI Over Ethernet TX or RX unit
- 1 - 12V 1A power adapter
4K HDMI TX or 4K RX Over IP Specs:
- Input TMDS signal: 1.2 volts (peak-to-peak)
- Input DDC signal: 5 volts (peak-to-peak)
- HDMI Connector: 19 pin type female connectors
- RJ-45 Connector
Why not buy a 4K POE HDMI Over IP Matrix w/Real Time iPad Video Preview & Video Walls today?
What is the Byo AV Over Lan HDMI Matrix Switchers designed to do?
A: The Byo AV Over Lan HDMI Matrix Switchers is a modular HDMI/AV matrix switcher designed to route HDMI/AV sources to multiple destinations in a configurable matrix architecture. It is intended for professional AV, broadcast, commercial, presentation, or distributed-video installations depending on the selected configuration.
The final configuration should be matched to the project requirements because available cards, chassis capacity, and interfaces differ across the product family.
How does matrix routing work on this system?
A: A matrix allows any compatible input to be routed to any compatible output, while also allowing one source to be sent to multiple outputs. This provides flexible source distribution without physically moving cables between devices.
Routing can be managed through the supported control interfaces, making it practical to change sources without physically reconnecting cables.
Can the system be configured for different input and output counts?
A: Yes. The modular architecture uses selectable chassis and I/O cards, allowing different source and destination counts to be specified. The available range depends on the product family, with this system supporting configurable matrix sizes.
The exact card compatibility and chassis capacity should be confirmed before building a system, especially when mixing signal types.
Does it support video wall processing?
A: The platform supports video wall processing on applicable configurations, allowing multiple displays to form a larger visual canvas. This can let a routed source span several screens.
Video wall layouts and scaling depend on the selected chassis, cards, displays, and resolution requirements.
What video resolution is supported?
A: The supported format depends on the product family. This product is designed around HDMI/AV and its stated resolution class, with some configurations extending to professional 4K or SDI formats.
The connected source, output card, display, cable or network extender must all support the selected resolution and frame rate.
What control options are available?
A: Depending on the model, control can include front-panel buttons or display, Web GUI, RS-232, TCP/IP, iOS or Android applications, and optional third-party control drivers.
These control methods allow operators to change routing and recall configurations without accessing every source and display.
Does the system support scaling?
A: Selected modular output cards provide resolution scaling so an output can be adapted to the connected display. Scaling is useful when sources and displays operate at different resolutions.
The exact scaling behavior is model and card dependent and should be selected according to the required display resolution and aspect ratio.
What audio capabilities are available?
A: Audio support varies by model, but applicable systems can provide embedded audio, separate audio routing, audio de-embedding, or dedicated audio matrix functionality.
The exact audio connectors and channel configuration depend on the selected model and cards.
Is the system suitable for professional installations?
A: Yes. These platforms are intended for broadcast, live production, commercial AV, presentation, sports bar, conference-room, signage, and other multi-display environments.
The modular architecture provides centralized routing and can accommodate larger I/O requirements than fixed consumer switchers.
What should be considered when building or specifying the matrix?
A: The main considerations are the required inputs and outputs, video format, resolution, transmission method, audio requirements, control method, scaling, and video wall needs. Key capabilities include flexible routing, modular expansion, control options and video wall processing.
Correct card selection, cabling, displays, network components where applicable, and control accessories are important for a reliable installation.
Why not buy a 4K POE HDMI Over IP Matrix w/Real Time iPad Video Preview & Video Walls today?
HDTV Supply's WolfPack Family of Matrix Switchers can be created however you wish. Just SCROLL DOWN and fill out the below and press SUBMIT and we will send you a quotation based upon your needs within an hour.
If it doesn't meet your needs just call us right now at 833-WOLFPACK or 833-965-3722 or email us at customerservice@hdtvsupply.com
How to set up an HDTV925 4K 30 Hz AV Over IP System
Link to Software APPs and a video on setting up the Plug & Play version
User Manual for 4K 30 Hz HDMI Over IP Matrix Switcher with Xview Control
WolfPack 4K 30 Hz HDMI Over IP Matrix Switchers Brochure
Assembly Guide for TX & RX Rack Mount Kit
UDP Commands for WolfPack 4K 30 Hz HDMI Over IP Matrix Switchers
