This 2x6 HDMI Splitter is a two input, six output HDMI Switch / Splitter. It has 2-female HDMI inputs that can be switched with the supplied remote control to 2-female HDMI outputs for short HDMI cable runs and 4-RJ45 CAT5 outputs using the above companion HDMI receivers. The signal transmission can up to ~100 feet between receivers and the switch by using one CAT5E/6 cable and up to 300 feet using the above optional Standalone HDMI/CAT5 extenders that use the 2-HDMI outputs.
NOTE: The HDMI receivers are unbundled so you don't have to pay for, say 4, if you need only 2.
The 2x6 HDMI Splitter has the ability of pre-emphasis and equalization assuring compatibility with your other devices. This 2x6 HDMI Splitter can distribute the two inputs to six "identical" outputs. If your HDMI lengths are long see the above optional HDMI over CAT5/6 standalone extenders to 300 feet.
2x6 HDMI Splitter Features:
Two HDMI inputs could be switched between each other.
Two HDMI outputs.
Four RJ45 outputs
Supports HDMI 1.4a
Supports highest video resolution 1080p/60Hz
Support 2.5Gbps data rate for tmds clock up to 225MHz
Support 8/10/12bit deep color
Support AWG24 HDMI standard cable, input up to 25 metres and output up to 15 metres
Supports high definition resolutions of 1080p, 1080i, 720p and other standard video formats
Low power consumption.
Includes a DC5V/3A power supply
NOTE: This HDMI switcher / splitter is not a matrix device and all 6 outputs are mirrored the same and dependent of which one of the 2 video inputs you have chosen. If you need a HDMI matrix switcher see our
HDMI matrix switchers.
The 2x6 HDMI Splitter offers solutions for digital entertainment center, HDTV retail and show site, HDTV, STB, DVD and Projector factory, noise, space and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments.
Q: Can I use unpowered HDMI over CAT5/6 extenders with this 2x6 HDMI Switcher Splitter?
A: We don't recommend them with our splitters or matrices, or anyone elses due to them consuming power from the matrix and the devices are not designed to power many external devices.
Consider the example of 8 - HDMI balun transmitters that need 0.5a amp each to power it times 8 or 4.5 amps the matrix would have to supply. The power supply of this device is rated not rated to supply that so in that example the unit would probably break down and your warranty may be voided. See the companion powered HDMI extenders in the above OPTIONS that have 2-AC adapters.
HDMI cables with built-in boosters also consume power also and we don't recommend more than 2, if at all. You must use our low power ones, also.
Ask a Question
Questions & Answers
Ask a question about the 2x6 HDMI Splitter w/4-CAT5 and 2-HDMI Outs or Call 833-WOLFPACK (833-965-3722)
2x6 HDMI Splitter w/4-CAT5 and 2-HDMI Outs
Scroll Left & Right To See 20 Of Your Recently Viewed Items Below