WolfPack 1x41 HDMI Splitter Over CAT6 to 300 Feet w/IR

WolfPack

1x41 HDMI Splitter Over CAT6 to 300 Feet w/IR
$3,650.00
Part Number:
HDTVHKSP0141MC
UPC:
728370345025
Availability:
In Stock
1:
1x41 Distribution Amp over CAT6 cables
2:
TCPIP Based Allows 300' In & Out
3:
1-Transmitter, 41-Receivers & Ethernet Switch
4:
Remote IR to control the source from 41-TVs
5:
Upgradeable by buying more HDMI receivers
6:
Does not require software, buttons or set up
ADD ADDITIONAL CARDS & CAT6 RECEIVERS:

HDTV Supply's WolfPack 1x41 HDMI Splitter Over CAT6 is a unique device that allows connecting any HDMI digital video source such as a DVD player, Camera, AppleTV, Satellite, Cable Box, PC, Xbox, PS43 and more with an HDMI output to up to 41 digital displays upwards of 300 feet away. The 1x41 HDMI distribution amplifier splits an HDMI signal into 41 mirrored (the same) outputs without signal loss upwards of 300 feet. It has Remote IR to control the source from 41-TVs, is upgradeable by buying more HDMI receivers and does not require software, buttons or set up

The 1x41 HDMI Splitter Over CAT6 also supports control of the source device (like a cable box) from the 41-far away TV locations via its built in IR control. Just point your source remote control at the supplied IR cable located at the TVs to operate the cable box. It uses CAT 5e/6 cables and a Gigabit Ethernet LAN switch with MJPEG techniques and an industry standard IP protocol to deliver 1080p video from sources that are 300 feet away from the Ethernet switch and another 300 feet away to the TVs. It also allows the system to grow in the field as its design allows you the flexibility of adding more displays to the system based upon the number of unused Ethernet ports available.

The transmitter has a static IP address and can pair with multiple receivers (up to 253). Multiple receivers can be paired on the same network. HDTV Supply's WolfPack HDMI to CAT6 Distribution system can display a single source on up to 100s of displays using a Single CAT6/7 cable for each display. These HDMI Over CAT6 Splitters also supports control of the source device (like a cable box) from the far away TV locations via its built in IR control. Just point your source remote control at the supplied IR cable located at the TVs to operate the cable box.

What Sets This 1x41 HDMI Splitter Over CAT6 Apart From Our Competition:

  1. It sends one HDMI source to 41-widescreens over a single CAT6/7 cable to each widescreen or projector
  2. Remote IR to control the source from the 41-TV locations
  3. Those CAT6/7 cables can be up to 300 feet long in and out of the switch i.e. 600 feet distances it can span
  4. It uses an inexpensive 5-port Ethernet switch that is supplied
  5. The 1x41 HDMI Splitter Over CAT6 comes with:
    • One transmitter plus its AC adapter
    • 41-receivers plus their AC adapters
    • A 48 port Ethernet switch is required and supplied
    • The 48 port Ethernet switch has 6-unused outputs which allows 6-more displays to be added by buying 6-more HDMI receivers.
    • 42 - IR cables
  6. It supports both HDMI video and audio
  7. It uses HDTV Supply's TCPIP technology
  8. it can be field upgraded by buying more receivers and a bigger Ethernet switch
  9. It does not require software, buttons nor any set up
  10. It is plug and play...no documentation is needed nor supplied

1x41 HDMI Splitter Over CAT6 Features:

  • Input HDMI resolution: 480i@60Hz; 480p@60Hz; 576i@50Hz; 576p@50Hz; 720p@50/60Hz; 1080i@50/60Hz; 1080p@50/60Hz;
  • Output HDMI resolution: 480p@60Hz; 576p@50Hz; 720p@50/60Hz; 1080p@50/60Hz
  • Supported Video Color Formats: 24 Bit/Deep color; 30 Bit/Deep color; 36 Bit Deep Color
  • Supported audio format: DTS-HD/Dolby-true HD/LPCM7.1/DTS/Dolby-AC3/DSD
  • Supports HDMI 1.3, HDCP 1.1 and DVI1.1 compliantcy.
  • Supports Deep Color up to 12 bits/color.
  • Supports IR re-transmitting.
  • Uses one CAT6/7 cable for each data/DDC transmission.
  • Equalizes and recovers the incoming ™DS data before re-transmitting it in optimal quality regardless of the incoming signal quality.
  • Cable testing showed that with 1080p resolution the HDMI input source can be 20 feet away using 24 AWG cabling.
  • When transmitting a signal in 1080p resolution the CAT6 operating distance is 100 meters or 33o feet.
  • Supported Resolution: 480p, 720p, 1080i, 1080p, 1920 x 1200
  • Bandwidth: 1.65Gbps
  • Transmission Range:
  • CAT6/7 UTP 24AWG - 1080p at ~300 feet
  • Both UTP (Unshielded Twisted Pair) and STP (Shielded Twisted Pair) cables can be used (UTP is recommended)
  • Supported HDMI cable length:
  • HDMI cable lenght from source (e.g. DVD) to Sender - 20 feet max with 24 AWG HDMI cable
  • Receiver to Unit (e.g. LCD TV) -- 6 feet with 28 AWG HDMI cable
  • HDCP compliant

Why not buy this 1x41 HDMI Splitter Over CAT6 w/Remote IR today?

1x41 HDMI Splitter Over CAT6 Specs:

  • Frequency Bandwidth 2.25Gbps (single link)
  • HDMI Transmitter Input/ Output Ports 1x HDMI Female port/1 x CAT6
  • HDMI Receiver Input/ Output Ports 1 x HDMI Female port/1 x CAT6
  • Power Supply DC 5V~12V
  • ESD Protection Human Body Model: 8kV (air-gap discharge) 4kV (contact discharge)
  • Operating Temperature 0˚C ~ 40˚C / 32˚F ~ 104˚F
  • Storage Temperature -20˚C ~ 60˚C / -4˚F ~ 140˚F
  • Relative Humidity 20~90% RH (non-condensing)

1x41 HDMI Splitter Over CAT6 Contents:

  • 1 - HDMI Over CAT6 Sender plus AC adapter
  • 41 - HDMI Over CAT6 Receivers plus AC adapters
  • 1 - 48-port Ethernet switch plus AC adapter
  • 42 - IR cables

Why not buy this 1x41 HDMI Splitter Over CAT6 today?

Don't use EZ45 Connectors

CAT6 Installation Tips (Don't Use Patch Panels)

Why not buy this 1x41 HDMI Splitter Over CAT6 w/Remote IR today?

This 1x41 HDMI Splitter Over CAT6 Works with:

  1. Any high definition Dish Network and DirecTV receiver with HDMI outputs
  2. High definition TiVo's with HDMI outputs
  3. Any high definition cable receiver with HDMI outputs
  4. Canadian Rogers, Shaw, Bell ExpressVu and Star Choice receivers with HDMI out, or DVI out with a converter
  5. Any "Over The Air" (OTA) high definition receiver with HDMI outputs
  6. Sony PS4, HD DVD and Blu-ray DVD players
  7. Any Xbox360 with HDMI outputs
  8. Any upconverting DVD player with HDMI outputs
  9. Any DVHS VCR with HDMI outputs
  10. Any APPLE TV with HDMI outputs
  11. A VuDu or Roku with HDMI outputs
  12. Any PC video card with HDMI outputs
  13. Any high definition camcorder with an optional type C to standard HDMI cable
  14. Any HDCP compliant HDTV, monitor and projector.
  15. and other similar devices.

Why not buy this 1x41 HDMI Splitter Over CAT6 w/Remote IR today?

Q: What are the IP addresses of the transmitter and receiver?
A: Here are the IP addresses for the HDMI distribution set(s)...
  • 192.168.168.55 - Transmitter
  • 192.168.168.56 - Receiver
Q: Are all ports capable of 1080p HDMI?
A: Yes, even at 300 feet.

Q: Sometimes we see a message on the screen "Searching for TX", what is that?
A: That usually happens when the source is turned off or in a standby mode with the HDMI connector not outputting any signal. The (TX) transmitter is looking for a hot HDMI signal on its input.

Why not buy this 1x41 HDMI Splitter Over CAT6 w/Remote IR today?

What Is a WolfPack Fixed HDMI Matrix Switcher?

A WolfPack Fixed HDMI Matrix Switcher is a single-chassis device that routes any HDMI source — such as a cable box, satellite receiver, streaming player, or computer — to any TV or display in a building, simultaneously and independently. Unlike an HDMI splitter (which sends one source to many screens) or a simple HDMI switch (which selects one source for one screen), a matrix switcher lets you show a different channel on every TV at the same time. HDTV Supply has sold WolfPack fixed matrix switchers to sports bars, restaurants, hotels, churches, schools, and commercial AV integrators since 2000.

Fixed vs. Modular: Which Do You Need?

WolfPack comes in two families: Fixed and Modular. Fixed matrix switchers have a set number of inputs and outputs built into one box — for example, 4 inputs × 4 outputs (4×4) or 8 inputs × 8 outputs (8×8). They are plug-and-play, rack-mountable, and the right choice when your input/output count won't change. Modular matrix switchers use a chassis with swappable I/O cards, scaling from a few ports up to 80×80 or beyond. If you know exactly how many sources and screens you need today, a fixed unit is typically lower cost and simpler to deploy.

Available Fixed WolfPack Configurations

HDTV Supply offers WolfPack Fixed HDMI Matrix Switchers in the following sizes:

  • 4×2 — 4 sources to 2 displays
  • 4×4 — 4 sources to 4 displays
  • 8×8 — 8 sources to 8 displays
  • 8×9 — 8 sources to 9 displays
  • 16×16 — 16 sources to 16 displays
  • 16×32 via CAT6 — extends signal up to 450 feet over CAT6 cable

Select models include built-in video wall processing, multiview, and picture-in-picture (PIP) — allowing two or more sources to display on a single screen simultaneously.

Control Options for Fixed Matrix Switchers

Every WolfPack Fixed HDMI Matrix Switcher supports multiple control methods so you can integrate it into any environment:

  • Front-panel buttons — manual source switching directly on the unit
  • IR remote control — included with most models
  • RS-232 serial control — for integration with Crestron, Control4, AMX, and similar systems
  • TCP/IP (LAN) control — send hex commands over your network from any device
  • Web GUI — browser-based interface for switching without additional software
  • Free iOS and Android apps — available for select WolfPack models

For RS-232 hex command strings and TCP/IP control protocols, see our WolfPack HEX Code Reference and TCP/IP Control Guide.

Frequently Asked Questions

What is the difference between a fixed HDMI matrix switcher and a modular HDMI matrix switcher?

A fixed HDMI matrix switcher has a set number of HDMI inputs and outputs built into a single unit — for example, 8 inputs and 8 outputs. A modular matrix switcher uses a chassis with interchangeable I/O cards, so you can configure it for many different port counts and expand it later. Fixed units are simpler and more affordable; modular units offer flexibility for larger or changing installations.

Can a WolfPack fixed matrix switcher show different channels on different TVs at the same time?

Yes. A matrix switcher routes any input to any output independently. In an 8×8 configuration, all 8 displays can show 8 completely different sources simultaneously, or multiple displays can share the same source — in any combination you choose.

Can I control a WolfPack fixed matrix switcher from a Crestron or Control4 system?

Yes. WolfPack Fixed HDMI Matrix Switchers support RS-232 and TCP/IP control, which are standard integration protocols supported by Crestron, Control4, AMX, and other third-party control systems. HDTV Supply provides hex command strings and driver documentation to support custom integrations.

What resolution do WolfPack Fixed HDMI Matrix Switchers support?

Resolution support varies by model. WolfPack fixed matrix switchers are available in 1080p (Full HD) and 4K 30Hz configurations. Select 4K models also support HDR and HDCP 2.2. Always check the individual product specification sheet for confirmed resolution, color depth, and HDCP version.

How far can I run HDMI from a WolfPack fixed matrix switcher?

Standard HDMI outputs on fixed matrix switchers support runs up to approximately 25–50 feet depending on cable quality and resolution. The WolfPack 16×32 model transmits over CAT6 cabling for distances up to 450 feet per run. For longer distances with other fixed models, HDMI extenders can be added at each display.

What is the best HDMI matrix switcher for a sports bar?

For sports bars with up to 16 TVs, a WolfPack Fixed 16×16 HDMI Matrix Switcher is a popular choice — it handles 16 independent sources (cable boxes, satellite receivers, streaming devices) and routes any of them to any TV. For larger venues with 20–80+ TVs, HDTV Supply's WolfPack Modular Matrix Switchers or AV Over IP systems are typically the better fit. Call 833-WOLFPACK (833-965-3722) for a free consultation.

Need Help Choosing?

HDTV Supply has been helping AV integrators, sports bars, hotels, and homeowners select the right matrix switching system for 25 years. Call us at 833-WOLFPACK (833-965-3722) or email kent@hdtvsupply.com and we'll recommend the right unit for your source count, display count, resolution requirements, and control system.