Features
HDTV Supplys WolfPack
1x4 HDMI Splitter with both digital coax audio and analog stereo audio along with user adjustable & EDID splits a single DVI or HDMI audio/video source to displaying on up to 4-widescreens all showing the same picture. The HDMI Splitters audio chip-set includes another chip to makes sure the sound and the picture are in sync and no delays occur between them using the coax or stereo outputs. The multiple EDID settings solves issues with mismatched resolution TVs & older TVs. Embedded audio extractors extract the HDMI audio and output via L/R and Coaxial.
The WolfPack 1x4 HDMI Splitter w/All Audio supports full 1080p HD up to 4K@30Hz UHD plus all 3D formats along with multichannel digital audio formats such as Dolby True HD and DTS-HD Master Audio. Embedded audio extractors can extract the audio and output via L/R and Coaxial. The HDMI splitter has good looking table mounts to sit on a cabinet.
Our 1x4 HDMI Splitter with both digital coax audio and analog stereo audio also has
16-level User Adjustable EDID learning function is added to increase its compatibility to any HDTV, unlike cheaper units that you have to guess or drops their EDID that causes problems with older TVs, HDMI to CAT5 extenders, long boosted HDMI cables and mixed TV resolutions.
WolfPack 1x4 HDMI Splitter w/All Audio Features:
- Supports resolutions up to 1080p@60Hz, 4K@30Hz, 36-bit deep color
- Splits an HDMI source to 4 outputs without loss
- 16-EDID modes solves issues with mismatched resolution & older TVs
- Extracts the audio from the HDMI source via analog and digital outputs.
- Dolby TrueHD and DTS-HD master audio pass through HDMI output
- Advanced EDID management for rapid integration of sources and displays
- LEDs for power-on and outputs indication.
- Easy installation with rack-mounting ears
- Small compact size
- Full 3D pass- through.
- HDCP 1.4 compliant
Q: Why should I buy an HDMI splinter with audio out when I can just route it from the audio source?
A: It is best to split out the signal from the HDMI output so there will be no out-of-synch signal between the video and the audio.
Why not buy this WolfPack 1x4 HDMI Splitter with both digital coax audio and analog stereo audio today?
Compatibility
A
16-level User Adjustable EDID learning function is added to increase its compatibility to any HDTV, unlike cheaper units that you have to guess or drops their EDID that causes problems with older TVs, HDMI to CAT5 extenders, long boosted HDMI cables and mixed TV resolutions.
Q/A
Q: What are the EDID DIP switch settings?
A: See below:
- [DIP]=0000: Copy EDID From Output1, i.e., EDID pass through
- [DIP]=0001: HDMI 1080p@60Hz, Audio 2CH PCM
- [DIP]=0010: HDMI 1080p@60Hz, Audio 5.1CH PCM/DTS/DOLBY
- [DIP]=0011: HDMI 1080p@60Hz, Audio 7.1CH PCM/DTS/DOLBY/HD
- [DIP]=0100: HDMI 1080i@60Hz, Audio 2CH PCM
- [DIP]=0101: HDMI 1080i@60Hz, Audio 5.1CH PCM/DTS/DOLBY
- [DIP]=0110: HDMI 1080i@60Hz, Audio 7.1CH PCM/DTS/DOLBY/HD
- [DIP]=0111: HDMI 1080p@60Hz/3D, Audio 2CH PCM
- [DIP]=1000: HDMI 1080p@60Hz/3D, Audio 5.1CH PCM/DTS/DOLBY
- [DIP]=1001: HDMI 1080p@60Hz/3D, Audio 7.1CH PCM/DTS/DOLBY/HD
- [DIP]=1010: HDMI 4K2K, Audio 2CH PCM
- [DIP]=1011: HDMI 4K2K, Audio 5.1CH PCM/DTS/DOLBY
- [DIP]=1100: HDMI 4K2K, Audio 7.1CH PCM/DTS/DOLBY/HD
Q: Will this 1x4 HDMI Splitter with EDID with only one display turned ON?
A: Yes, the four outputs are independent and the 1-4 HDMI Splitter works even when only one display is turned ON. Many HDMI splitters have synchronized outputs which require all displays to be turned ON at the same time for those splitters to work.
The 1X4 HDMI Splitter with User Adjustable EDID will mix the EDID data of all connected sink devices like a widescreen and send this mixed EDID to the HDMI source device. EDID mixing allows all all the connected sink device to have video and audio they can display or output.
Example: One TV is 1080p and stereo, another is 1080i and 5.1 audio. The mixed EDID will be 1080i and stereo audio.
FAQ
To ensure 3D Blu-ray or 4K content is routed via this device, High Speed HDMI cables must be used and any connected non-3D or non-4K compatible display must not have an "active" HDMI output (i.e. powered off or in standby mode). The 4K or 3D source player must not be able to "see" a 2D or non-4K only display connected to the unit.
Read more at
WHAT I NEED TO KNOW ABOUT EDID
Why not buy this 1x4 HDMI Splitter with both digital coax audio and analog stereo audio today?
Government
This product may be eligible to be purchased through the United States Governments SEWP program, similar to their GSA program.
The NASA SEWP (Solutions for Enterprise-Wide Procurement) provides the latest in Information and Communications Technology (ICT) and Audio-Visual (AV) products and services for all Federal Agencies and their approved contractors.
If you are a government agency and want to see whether HDTV Supply has this product in the SEWP database go to our
our SEWP Contract Holder RedHawk IT Solutions, LLC to allow you to maybe order this product from the United States Governments SEWP program. It is very easy to place your order, go to the link above and enter HDTV Supply and there you will see a list of part numbers of what we currently have. If you do not see it than give us a call at 833-WOLFPACK (833-965-3722) and we may be able to enter it.
Our SEWP Contract Holder RedHawk IT Solutions partner has the following credentials:
- DUNS: 801957023
- TIN: 260452583
- CAGE: 4TBM6
Their SEWP Federal Contracts are:
- SEWP Contract Number: NNG15SD38B
- Group: Group B_SDVOSB
- NAICS: 541519
and
- SEWP Contract Number: NNG15SD88B
- Group: Group C
- NAICS: 541519
The SEWP Program Office manages a suite of government-wide IT products and services contracts that enable NASA and all Federal Agencies to achieve their missions and strategic initiatives by providing streamlined access to critical technologies and solutions. The Program provides best value for the Federal Government and American taxpayer through innovative procurement processes, premier customer service and outreach, acquisition insight, and partnership with Government entities and Industry.
For a complete listing of HDTV Supply products from us, or our other vendors, call 833-WOLFPACK (833-965-3722).
)
