This 1X9 Component Video Distribution Amplifier with Loop Out and VR ( power loop out ) is designed to work as a splitter for Component Video applications.
NOTE: This product has been discontinued. See the above SIMILAR Tab for equivalent products or, if not there, call us at 800-841-9238 right now to discuss your needs.
This 1X9 component video splitter can split the outputs of the following and sent to 9 HDTV's:
High definition Dish Network and DirecTV receivers with component outputs
High definition TiVo's with component outputs
High definition cable receivers with component outputs
WII, Sony PS2, PS3, HD DVD and Blu-ray DVD players with component outputs
Xbox, Xbox 360 & Xbox 360 Elite with component outputs
Upconverting DVD players with component outputs
A/V surround sound receivers / preamps with component switching
PC video cards with component outputs
and other similar devices with component outputs.
It is capable of splitting a Component Video signal from one source to nine displays with compatible inputs. A built in amplifier will boost the signal to the needed level, to prevent signal loss and picture degradation.
A maximum bandwidth of 700MHz will support a sharp and highly defined video in multiple resolutions of up to 1080p.
The 1X9 Distribution Amplifier works with satellite and cable set-top boxes, DVD players, D-VHS players and all other equipment that is equipped with proper Audio/Video Connections.
1X9 Component Video Distribution Amplifier Features:
Sends Video (and optionally audio) to multiple displays at the same time
Allows connection of 9 displays
VR function Allows the use of one power supply for multiple units.
Supports 480i, 480p, 720p, 1080i and 1080p resolutions
Installs in seconds
1X9 Component Video Distribution Amplifier Specifications:
Video Amplifier Bandwidth: 700MHz
Resolutions: up to 1080p
Video Input Connectors: 3-RCA 75Ω (Y/PB/PR)
Video Output Connectors: 8 sets of 3-RCA 75Ω + Loop Out (Y/PB/PR) + VR