This HDTV Supply WolfPack 4K 30 Hz 4x1 Switcher, Scaler and Rotator is a new 4K vertical screen signal conversion processor. It adopts unique embedded structure design and can be connected to 4 HDMI inputs and a 4K60 HDMI with 3.5mm audio out with resolution scaling. The processing process is completely hardware and does not require computer software to control it. Simply press push-button for rotating, scaling and switching. This 4K switcher&Scaler&rotator uses cutting-edge processing techniques such as motion detection and compensation, interpolation, edge smoothing and clutter suppression. It supports direct rotating of any of the 4 HDMI inputs to 90/180/270 degrees, the 4 HDMI inputs resolution up to 4K30 or 4K60(HDMI IN3), the HDMI output can up to 4K60, this rotator also can support the RS232 control, IR remote and the front push buttons

Get ready to upgrade your viewing experience with this innovative 4K switcher, scaler and rotator! It packs an impressive array of features including embedded structure design for intuitive connections, resolution scaling up to 4K60 output, motion detection compensation technology and more. With easy push-button controls or optional remote control & RS232 options it's the perfect addition to any high-end audiovisual system. Enjoy crystal clear images with advanced interpolation algorithms providing edge smoothing and clutter suppression

SUPPORT UP TO 4K INPUTS - This switch can easily handle any resolution up to 4K. With four inputs, you can connect all of your devices and easily switch between them.

-4K60 OUTPUT - Not only does this box support resolutions up to 4K, but it also outputs at 60 frames per second for smooth video.

-EASY CONTROL - Three easy methods of control: front panel push button, IR remote, and RS232. Plus, the 3.5mm audio de-embedded port lets you send the audio signal from the HDMI source to an external amplifier.

-PLUG AND PLAY - No need to set up or configure anything! Simply plug in your devices and start using them. The low power consumption means this box is perfect for busy setups that need a lot of ports.

HDTV Supply WolfPack 4K 30 Hz 4x1 Switcher, Scaler and Rotator Features:

Support up to 4K inputs and 4K60 output
Supports front panel push-button, IR remote and RS-232 control
Supports the 3.5mm audio de-embedded
Pure hardware structure, plug and play, no need to set up, easy to operate.
Support 90/180/270 degree image rotation
Low power consumption

Why not buy this HDTV Supply WolfPack 4K 30 Hz 4x1 Switcher, Scaler and Rotator today?

HDTV Supply WolfPack 4K 30 Hz 4x1 Switcher, Scaler and Rotator Specifications:

Input: 1 x HDMI2.0(4K60); 3 x HDMI1.4(4K30)
Output: 1 x HDMI2.0
Input: 4 x HDMI
Input audio signal: RAW PCM, 16 bit, 32/44.1/48KHz sps; PCM 2.0
Output: 1 x HDMI2.0;1 x Analog Audio
Output audio signal: RAW PCM, 16 bit, 32/44.1/48KHz sps; PCM 2.0

Control method

Front panel button
- IN1: Switch to Input 1
- IN2: Switch to Input 2
- IN3: Switch to Input 3
- IN4: Switch to Input 4
- RES: Set up the output resolution switching to 720P, 1080P, 4K30, 4K60
- ROTATE: To rotate the HDMI output to 90/180/270 degrees
IR: Can realize all the functions of the button, also support fast switching
RS232: The interface is a 3pin phoenix segment, which support third-party control

General parameters

Operating temperature: 0 to +45°C (32 to + 113 °F)
Storage temperature: -20 to +70°C (-4 to + 158 °F)
Relative humidity: 10% to 90%
Static Protection:
- Human body discharge mode:±8kV (Air gap discharge)/
- ±4kV (Contact discharge)
Power supply: 12 V 1.5 A DC
Power consumption: 10W(Max)
Measure: 223X27X97(mm)
Net weight: 0.8kg