The Wireless HDMI Extender from HDTV Supply has the ability to wirelessly transmit 1080p Audio & Video Signals from a HDMI Source Device to a HDTV or Projector over a distance of up to 500 feet. The Wireless HDMI Extender Transmits Full HD 1080p@60Hz with zero latency. With IR Pass Back, you can control the media source device from the HDTV display, allowing the user to change channels, pause the movie etc.
(*) NOTE: Transmission distances can be different due to the environment. Wall, brick or glass will shorten the signal range or cause signal loss so keep these barriers to a minimum. Call us with your installation needs.
The Wireless HDMI Extender uses our HDbiT technology. HDbiT is a transmission protocol for high-definition audio or video via network, compared to traditional technology, it provides more stable performance, image clarity, further transmission distance and other significant advantages, easily to meet the demand of high-definition long-distance transmission without any converter.
Wireless HDMI Extender Features:
Transmit HDMI signal from source device to display device up to 200meters wirelessly
Full HD 1080p transmission and full compliant with HDMI and HDCP
Support IR remote control function to control source device content from long distance.
No cable between sender(TX) and receiver(RX)
Easy and clean installation
No Installation Costs
No Unsightly Wiring
Fast Installation Time
Simply Plug and Play
Long Range Capability of transmitting through walls to equipment in another room
Superior Product with very wide applications
Longer Range Capabilities
Higher Quality Signal Transmissions
No Wi-Fi Required
No software Required Simply Plug & Play
Supports Resolutions: 480i@60Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz, 720p@50/60Hz, 1080i@50/60Hz and 1080p@50/60Hz
Wireless extension of HDMI up to 100 feet (30 meters)
Supports resolutions up to 1080p Full HD
HDMI Features Supported:
Dolby TrueHD, DTS-HD Master Audio, and PCM digital audio up to 7.1 channels
Uncompressed High Definition A/V from source to display
The Wireless HDMI Extender sends high definition audio and video to any HDTV display up to 500 feet away. It extends HDMI from computers, set-top boxes, Blu-ray players, and other audio/video sources to a remote HDTV display. The Wireless HDMI Extender supports resolutions up to 1080p with support for 7.1-channels of digital audio in PCM, Dolby, or DTS audio formats.
An IR emitter can be connected to the Sender unit and attached to the IR sensor lens of the Hi-Def source, allowing full control of the source from another room simply by pointing the IR remote at the Receiver unit. The Wireless for HDMI Extender LR transmits through walls and does not require line-of-sight for good reception. Additional features allow multiple Sender units where each display can access up to three sources, using the included handheld remote control.
Any high definition Dish Network and DirecTV receiver with HDMI outputs
High definition TiVo's with HDMI outputs
Any high definition cable receiver with HDMI outputs
Canadian Rogers, Shaw, Bell ExpressVu and Star Choice receivers with HDMI out, or DVI out with a converter
Any "Over The Air" (OTA) high definition receiver with HDMI outputs
Sony PS3, HD DVD and Blu-ray DVD players
Any Xbox360 with HDMI outputs
Any upconverting DVD player with HDMI outputs
Any DVHS VCR with HDMI outputs
An APPLE TV with HDMI outputs
A VuDu with HDMI outputs
Any PC video card with HDMI outputs
Any high definition camcorder with an optional type C to standard HDMI cable
Many A/V surround sound receivers with HDMI switching that include the proper chip set. Call your AV receiver supplier to discuss your application or us.
Any HDCP compliant HDTV, monitor and projector. If the source is HDCP compliant and your TV is not, you will not get a picture. Please check your TV manual or the manufacturers web site.
and other similar devices.
Ask a Question
Questions & Answers
Ask a question about the Wireless HDMI Extender to 500 Feet (Through Walls Solution) or Call 833-WOLFPACK (833-965-3722)
How The Wireless HDMI Extender Works: Connect an HDMI cable from the Hi-Def source to the Sender unit. Connect an HDMI cable from the Receiver unit to the HDTV display. Connect the included power supplies to both the Sender and Receiver units then connect the power cords to available electrical outlets. Connect an IR emitter from the Sender unit to the IR device to be controlled. Power-up the source and the display. The "Video" indicators on both units should now glow solid blue to indicate a successful connection between the Sender and Receiver unit.
If the Sender and Receiver units do not pair automatically, point the IR remote at the IR sensor window on the Receiver unit and press the Menu button. Navigate through the on-screen menu and have the Receiver unit look for a Sender unit. Press and hold the pairing button on the Sender unit until the Link LED starts blinking. Press the OK button on the IR remote. A message indicating that the Sender and the Receiver units have been paired will appear on the display. Point the source's IR remote at the IR window on the Receiver unit to control the source that is placed near the Sender unit.
This product may be eligible to be purchased through the United States Governments SEWP program, similar to their GSA program.
The NASA SEWP (Solutions for Enterprise-Wide Procurement) provides the latest in Information and Communications Technology (ICT) and Audio-Visual (AV) products and services for all Federal Agencies and their approved contractors.
If you are a government agency and want to see whether HDTV Supply has this product in the SEWP database go to our our SEWP Contract Holder RedHawk IT Solutions, LLC to allow you to maybe order this product from the United States Governments SEWP program. It is very easy to place your order, go to the link above and enter HDTV Supply and there you will see a list of part numbers of what we currently have. If you do not see it than give us a call at 833-WOLFPACK (833-965-3722) and we may be able to enter it.
Our SEWP Contract Holder RedHawk IT Solutions partner has the following credentials:
Their SEWP Federal Contracts are:
SEWP Contract Number: NNG15SD38B
Group: Group B_SDVOSB
SEWP Contract Number: NNG15SD88B
Group: Group C
The SEWP Program Office manages a suite of government-wide IT products and services contracts that enable NASA and all Federal Agencies to achieve their missions and strategic initiatives by providing streamlined access to critical technologies and solutions. The Program provides best value for the Federal Government and American taxpayer through innovative procurement processes, premier customer service and outreach, acquisition insight, and partnership with Government entities and Industry.
For a complete listing of HDTV Supply products from us, or our other vendors, call 833-WOLFPACK (833-965-3722).
Wireless HDMI Extender to 500 Feet (Through Walls Solution)
Scroll Left & Right To See 20 Of Your Recently Viewed Items Below