This Vitec (formerly Exterity) AVSTR-E2320 AvediaStream e2320 Encoder use for any building, campus or metropolitan area in which video or decrypted TV are required, without the added expense of a separate cable network solely for TV.

The AvediaStream e2320 encoder streams video (news, sports, entertainment, educational) channels over your existing network. It encodes and distributes content from a wide range of sources such as DVD Players, set top boxes and digital cameras to an IP network. The e2320 is a dual encoder so can stream simultaneously from two independent video sources.

Use your existing IP network to distribute video from cameras or DVD/Blu-ray players, or TV from set-top boxes.

Vitec (formerly Exterity) AVSTR-E2320 AvediaStream e2320 Encoder Features:

Encode Standard Definition (SD) and High Definition (HD) video and audio into MPEG streams
Add display devices and users without degrading picture quality
Control video and TV access
Outputs MPEG-2 Transport Stream over UDP or RTP as IP multicast or unicast stream
Dual encoder in single blade for cost-effective installations
MPEG-2 or H.264 video encoding
SD or Sub-SD encoding
Video inputs: Composite, SD Component, RGBS, S-Video
Audio inputs: Unbalanced Stereo
Hot swap blade allows quick and non-intrusive upgrade to existing installations using Vitec (formerly Exterity) chassis options (c1101, c1103, c1110)
Embedded system for high reliability and low power consumption

Why not buy this Vitec (formerly Exterity) AVSTR-E2320 AvediaStream e2320 Encoder today?

Vitec (formerly Exterity) AVSTR-E2320 AvediaStream e2320 Encoder Specifications:

InterfacesVideo Input:
- Dual inputs providing Composite (RCA), Component (RCA), S-Video (RCA) and RGBS (RCA) (only channel A can input RGBS)
- 1V p-p 75©
IR out (3.5mm jack socket- not enabled at this firmware release)802.3 10/100BaseT Ethernet (RJ45 chassis socket)
Serial RS232 Port for local administration (RJ45 chassis socket)
Streaming
- Single program MPEG-2 transport streams (ISO/IEC 13818-1)
- RTP
- UDP
- IP unicast
- IP multicast
- IGMP Join Group for enhanced switch compatibility
- Up to 80Mbps total stream output
Management
- Fully integrated with Vitec (formerly Exterity) management tools
- Network administration via SSH, Telnet and SNMP
- HTTP web interface (Supported browsers Firefox, Internet
- Explorer (IE8 onwards) and Chrome)
- Serial RS232 Admin Port
- Telnet Control Interface (TCI)
- Event logging via Syslog (local and remote)
- Firmware upgrade via TFTP
- Configuration backup/restore via TFTP
Channel Management
- Channel announcement via SAP/SDP
- Up to ten simultaneous stream destinations
- Multicast/unicast address selection (automatic or manual)
- Configurable name, number and group membership
Video Input
- PAL, SECAM, NTSC auto-switching
- Resolutions supported: 525i (480i) 60Hz and 625i (576i)50Hz
- 4:3 / 16:9 aspect ratio
- Wide Screen Signalling for automatic aspect ratioswitching
Video Encoding
- MPEG-4 part 10 H.264 (ISO/IEC 14496-10)
- High Profile @ Level 3 (profile user configurable)
- MPEG-2 (ISO/IEC 13818-2)
- Main Profile @ Main Level
- Configurable GOP structure option with all encodingprofiles
Output Video Resolution:
- 525i input: SQCIF (128x96p), QVGA (320x240p), SIF(352x240p), 525i (720x480i)
- 625i input: SQCIF (128x96p), QVGA (320x240p), CIF/SIF(352x288p), 625i (720x576i)
- Bit rate: 128kbps 15Mbps
- Frame rate: 12Hz 60Hz
- Constant or variable bit rate
Audio Encoding
- MPEG-1 Layer II (ISO/IEC 11172-3)
- Stereo encoding bit rate 64kbps 384kbps
- Mono encoding bit rate 48kbps
- Audio sampling rate 48kHz
System
- CPU: ARC 500MHz
- RAM: 512MB
- Flash: 128MB (for firmware and configuration)
- OS: Linux 2.6
Network
- Linux IPv4 stack
- DHCP or Static IP addressing
- IEEE 802.3u 10/100Mbps MDIX Ethernet
Protocols
- IP (RFC 791), UDP (RFC 768), TCP (RFC 793), ARP (RFC 826),DNS (RFC 1035), DHCP (RFC 2131), ICMP (RFC 792), IGMP(RFC 3376), TFTP (RFC 1350), HTTP (RFC 2616), Telnet (RFC318) Syslog (RFC 3164), NTP (RFC 1305), SAP (RFC 2974), SDP(RFC 4566), RTP (RFC 3550), SNMP (v1, v2c -RFC 1901)
Regulatory
- CE
  - EN55022: 2010, EN61000-4-2: 1995 + A1 +A2, EN61000-4-3: 1996, EN61000-4-4: 1995,EN61000-4-6: 1996, EN55024:2003, IEC 60950-1:2005 (Second Edition), Am 1: 2009
- UL/CSA
  - 47CFR: 2008 Part 15, Sub Part B, ANSI C63-4: 2003
  - CAN/CSA C22.2 No. 0-M, CAN/CSA C22.2 No.60950-1-07, UL 60950-1, 2nd Edition
- Environment
  - Operating: 0 ...+40°C / +32 ... +104°F
  - Storage: -20 ...+70°C / -4 ... +158°F
  - Operating and storage Relative Humidity: 10-90%
  - (non-condensing)
Physical Format
- Modular hot swap blade for Vitec (formerly Exterity) chassis
  - AvediaStream c1101 providing up to 2 inputs
  - AvediaStream c1103 providing up to 6 inputs
  - AvediaStream c1110 providing up to 20 inputs
- Dimensions
  - L: 275mm x W: 130mm x H: 40mm
- Power
  - DC 24V: 10W Typical, 12W Maximum
- Weight
  - 0.5kg