This Thor Broadcast F-1Tel 1 or 2 Telephone Line over Fiber is used for carrying analog phone over fiber fiber optic cable. Telephone over Fiber applications offer a secure connection that is impossible to bug. The PSTN two-wire POTS telephone port can be configured either as an FXO (PBX trunk) or FXS (telephone set/fax machine/dial-up modem) device just by a simple DIP switch setting. Using two of these devices, a telephone line can be extended over a fiber link. The F-1TEL provides full service for features like caller ID. The converter can be used in service mode, allowing connection of 2 telephone sets. The unit offers SNMP allowing remote management and sensing of converter status, type, version, fiber link status, RJ11 port status, and alarms. The F-1TEL is a RJ11 to Fiber Optic Converter with a simple and reliable solution for data carriers and service providers for Telephone over Fiber links.

Thor Broadcast F-1Tel 1 or 2 Telephone Line over Fiber Features:

Extend telephone voice transmission from 2km to 120km over fiber
Network management via terminal, web or SNMP
Supports telephone voice transmission
Supports caller ID pass through
Selectable FXO or FXS mode
Supports FXS to FXS hot lin

Why not buy this Thor Broadcast F-1Tel 1 or 2 Telephone Line over Fiber today?

Thor Broadcast F-1Tel 1 or 2 Telephone Line over Fiber Specification:

*All Specifiactions Subject to Change Without Notice
Optical Interface
Connector	ST/PC
Cable Length	MM 2km, SM 15/30/50/80/120km, WDM 20/40/60/80km
Wavelength	MM 1310nm, SM 1310, 1550nm, WDM 1310Tx/1550Rx, 1550Tx/1310Rx
Electrical Interface
Connector	RJ-11
FXO Mode	600 ohms, Coding : 16 bits liner, Loop Current : 10~100mA Ring Frequency : Acceptable 20 ~50Hz, Insertion Loss: 0.0 ± 1.0dB at 1000H
FSX Mode	Impedance : 600 ohms, Coding : 16 bits liner, Dial: DTMF and Dial Paul, Battery Source: 48VDC ± 4
Ringing Waveform	Sine Wave
Ringing Frequency	20/25/30/50 Hz selectable
Ring Cadence	FXS to FXS : On / 1 sec, Off / 2 sec
FXO to FXS	Reproduces the cadence detected by FXO Insertion Loss 0.0 ± 1.0dB at 1000Hz REN: 4.0B(Ring Equivalence Number
LED Indicators	Power, FX Link, Phone Act, Test
Power Requirments	DC IN 12V
Power Consumption	5 W
Dimensions	480mm x 225mm x 44mm
Temperature	0~50°C (Operating) 0~70°C (Storage)
Certifications	CE, FCC, LVD, RoHS
MTBF	125,000 h (25°C)