Subwoofer cables - Many Lengths - Tested to 1-KHz to be perfect

Price: $59.95
Today's Price: $14.95
Part Number:
Usually ships the same business day
These subwoofer cables are tested to be perfect from 1 Hertz to 1-KHz so that it gives you a perfect low frequency signal
CL2 Rated for in-wall installations
Comes with a Y cable to increase the lows to your subwoofer

subwoofer cable

is tested to be perfect from 1 Hertz to 1-KHz so that it gives you a perfect low frequency signal. These premium grade tested subwoofer cables use 24K gold plated connectors and the cable has a 75-ohm characteristic impedance for maximum power transfer from your subwoofer or surround sound amplifier. This comes with 2 cables...(1)the subwoofer cable and (2)a Y cable to bond the right and left amp output to increase the lows to your powered subwoofer.

Typically, powered subwoofers will come equipped with either a single RCA connector, or double RCA connectors. However, both connections typically only require a mono (single) connection. Therefore, if you have both right and left inputs, a single cable connected to the "left" input will probably work just fine. However you can get anywhere from a 3 dB to 10 dB gain from your subwoofer by plugging into both stereo inputs with this subwoofer cable.

Without the right subwoofer cable, your subwoofer can emit buzz and hum. Unfortunately, all subwoofers emit annoying noises – some more than others. Ordinary cables can't reject this noise. In fact, they often attract it, especially over longer cable runs. If you're using a Dolby Digital or DTS processor, this noise will limit the Low Frequency Effects channel's ability to deliver the powerful, deep bass it's famous for. Ordinary subwoofer cable can't deliver the low frequencies subwoofers generate, causing distorted, weak bass that's inarticulate.

These sub-woofer cables are CL2 rated for in wall use. Our subwoofer cables construction greatly reduces noise sensitivity, so you can enjoy every last sound detail of your favorite movies, without any noise. High density double-shielding provides for maximum rejection of high and low frequency interference, even over long runs. All of our cables have gold plated connectors which resist corrosion 100 times better then non-plated connectors. Many home theater applications require the cables be installed inside walls, fireplaces or other moisture rich areas and using our gold plated connectors assures you that you will not have any future corrosion issues that may result in a bad audio.

These subwoofer cables have been tested and are compliant with the following standards:

  • Dolby Digital
  • Dolby Digital Plus
  • Dolby TrueHD (2 CH)
  • DTS
  • DTS HD
  • Dolby Pro Logic
  • Dolby Pro Logic II
  • Dolby Pro Logic IIx
  • Dolby Pro Logic IIz
Discover the Ultimate Subwoofer Performance: With our tested subwoofer cables you can enjoy all your favorite movie titles with considerably fewer annoying buzzes and hums and powerful, crystal-clear bass. You'll hear what the movie makers intended you to hear. The equipment you connect to this cable, though, must be capable of decoding these audio protocols.

Your low frequency audio is only as good as the subwoofer cable that connects it. Why not buy this sub-woofer cable today?

Serious home theater isn't just about watching movies - it's about experiencing and feeling them. Achieving the best sound means using the most advanced, highest definition subwoofer cable and ours can achieve that as they are tested to have a flat frequency response to 1,000 Hz.

Tests performed on the subwoofer audio cable:

  • Series Resistance ___ohms or immeasurable___
  • Parallel Resistance ___ohms or immeasurable___
  • Series Capacitance ___picofarads or immeasurable__
  • Parallel Capacitance ___picofarads or immeasurable___
  • Series Inductance ___microhenries or immeasurable___
  • Parallel Inductance ___microhenries or immeasurable___
  • Phase shift between wires __degrees or immeasurable__
  • Crosstalk between wires __db or immeasurable___
  • Audio frequency response from 1 Hz to 30 KHz +-__ db
  • 24K gold connector inspection____Pass, ____Fail
  • Total cable inspection ___Pass, ___Fail
  • Dolby Digital Audio Compliancy___Pass, ___Fail
  • DTS Audio Compliancy___Pass, ___Fail

Your low frequency audio is only as good as the subwoofer cable that connects it. Why not buy this sub-woofer cable today?

Q: What comes with the subwoofer cable?
This product contains two cables.

1 - A RCA male to male subwoofer cable.

1 - A female RCA to 2 male RCA Y-adapter cable as required by some subwoofers.