This 4K Rack Mount Dual 1x4 HDMI Splitter w/HDMI 1.4 compliancy uses a two single HDMI sources & sends it to up to 4 HDMI equipped widescreens. It combines two 1x4 DVI/HDMI splitters in a 1U standard chassis. The Rack Mount Dual 1x4 HDMI Splitter supports 2 - DVI/ HDMI inputs and 8 - DVI/ HDMI outputs with a resolution of up to 1920x1200@ 60Hz and a maximum resolution up to 4K with smart EDID management. It is compatible with DVI 1.0 and a cable distance of 35-feet with 28-gauge cables or use the above $50 1080p to 150' HDMI Extenders.
It is HDMI 1.4 compliant & supports 4Kx2K resolutions. This Rack Mount Dual 1x4 HDMI Splitters chip-set includes a chip to makes sure the sound & the picture are in sync & no delays occur between them. The Rack Mount Dual 1x4 HDMI Splitter allows one HDMI device to be split easily to four HDMI compatible monitors or projectors...times 2. The Rack Mount Dual 1x4 HDMI Splitter allows one HDMI devices to be split easily to four HDMI compatible monitors or projectors. The 1-4 HDMI Splitter with HDMI 1.4 compliancy can also be placed at the end of a long HDMI cable to regenerate the HDMI signal.
What sets this Rack Mount Dual 1x4 HDMI Splitter apart from the competition is its 4Kx2K, 4K for short, resolution that supports today's 1080p resolution as well as 4,096 lines wide by 2,160 lines high or roughly four times the resolution of a 1080p display and is double the number of lines of a typical HD picture, and more than double the number of pixels across the screen – so over four times the resolution. This Rack Mount Dual 1x4 HDMI Splitter has been designed to support 4K and have four times the resolution and signal bandwidth and memory for today's needs and future 4K products.
Support video color format: 24bit/deep color 30bit,36bit
Max transmission bandwidth: 10.2Gbps
Input/Output TMDS signal: 0.5~1.5Volts p-p
Input/Output DDC signal: 5Volts p-p (TTL)
This premium HDMI to DVI Converter offers an effective digital video signal transmission path between HDMI and DVI-D (single Link) compatible devices. The female HDMI to male DVI Converters are constructed to HDMI v1.1 and DVI v1.0 specifications and each adapter features (1) beryllium copper contacts, (2) a 100% coverage copper foil shield, (3) a nickel-plated steel connector shell, (4) and a fully molded PVC body and connector overmold. This DVI to HDMI adapter has gold plated connectors which resist corrosion 100 times better then non-plated connectors and using our gold plated adapter assures you that you will not have any future corrosion issues that may result in a bad high definition picture.
This DVI to HDMI adapter is HDCP Compliant. HDCP (high bandwidth digital content protection) is a standard encoded into the video signal to prevent it from being pirated. If a source device is HDCP coded and is connected to a DVI display or projector without the proper HDCP decoding mechanism, the picture is relegated to snow or in some cases, very low (480P) resolutions of the images. In order to see HDTV with HDCP compliance, both the source, the display and any device in between must be equipped with DVI and HDMI connections that can enable HDCP decoding, such as this DVI to HDMI adapter.
Why not buy this Rack Mount Dual 1x4 HDMI Splitter today?
An 8-level User Adjustable EDID learning function is added to increase its compatibility to any HDTV, unlike cheaper units that you have to guess or drops their EDID that causes problems with older TVs, HDMI to CAT5 extenders, long boosted HDMI cables & mixed TV resolutions. In operation, the digital video source is connected to the distribution amplifier on one side. On the other side, up to ten HDMI outputs are available to be used in part or in full. Once the unit is connected and powered, your source is routed to up to ten digital displays at the same time.
Q: Does it support for 4K 30 HDMI?
A: Yes, the Rack Mount Dual 1x4 HDMI Splitter can support up to 4K30 HDMI input and output.
Q: Does the splitter ship with 10 - HDMI to DVI adapters?
Q: Can DVI support audio?
A: A DVI signal will not support audio.
Q: If I loop one splitter into the other how do I set the EDID on both?
A: As there are dual 4-pin EDID settings on the front panel the EDID settings can be set up separately. With this dual 1x4 HDMI/DVI splitter to loop together the maximum it can be is an 1x7 HDMI/DVI splitter.
Ask a Question
Questions & Answers
Ask a question about the Rack Mount Dual 1x4 HDMI Splitter or Call 833-WOLFPACK (833-965-3722)
Rack Mount Dual 1x4 HDMI Splitter
Scroll Left & Right To See 20 Of Your Recently Viewed Items Below