HDTV Supplys WolfPack Professional 1X8 HDMI Splitter over CAT6 is a eight-way HDMI splitter & distributes 1-HDMI input to up to 8 identical CAT6 signals. The 8 outputs are synchronized and only one CAT6/7 cables is required going to the TVs. The HDMI Splitter over CAT6 chip-set includes a chip to makes sure the sound and the picture are in sync and no delays occur between them. 8-Receivers Included plus their AC adapters are included. Bidirectional Remote Control allows control from every TV & source so to change the source parameters or turn the TVs off.

This WolfPack 1X8 HDMI Splitter over CAT6 has the ability to pre-emphasis & equalization. Series connection of 1X8 HDMI Splitter over CAT6 achieves long distance transmission of an HDMI signal of ~15 meters. Each receiver works with the splitter as a full functional module to extend the HDTV display up to >100 feet for 1080p. It supports 1080p TV′s at 24/30/60/100/200/240 Hz and above as well as Blu-rays at 24 FPS.

WolfPack 1X8 HDMI Splitter over CAT6 Features:

1 - HDMI input.
8 - UTP method HDMI outputs.
15 - User Adjustable EDID Modes
New EDID chip set to prevent another TV turning off when you turn another TV off.
They support 1080p TV′s at 24/30/60/100/200/240 Hz and above as well as Blu-rays at 24 FPS
Unused outputs do not upset the other wired outputs as many other splitters do
Equalize Selector: Select High or Low depending upon the distance of UTP LAN cable. Low works between 0 and 20 meters and high work between 20 and 50 meters.
Video Format Supported:
- VGA: 640x480, 800x600, 1024x768 and 1280x1024
- DTV/HDTV: 480i / 576i / 480p / 576p / 720p / 1080i / 1080P
IR call back function to control the source from TV side.
HDMI 1.3, HDCP 1.2 and DVI 1.0 compliant
DIP switch setting to control EDID
Easy to Use: Install in minutes.
The user could control the HD box from the TV side via a self-learning type universal remote.

User Adjustable Extended Display Identification (EDID) Data is a VESA standard data format that contains basic information about a HDTV and its capabilities, including vendor information, maximum image size, color characteristics, factory pre-set timings, frequency range limits, and character strings for the monitor name and serial number. EDID helps to eliminate HDMI′s troublesome HDCP handshake issue. The information is stored in the display and is used to communicate with the system through a Display Data Channel (DDC ), which sites between the monitor and the source device. The system uses this information for configuration purposes, so the HDTV and system can work together.

Why not buy this WolfPack 1X8 HDMI Splitter over CAT6 today?

The WolfPack 1X8 HDMI Splitter over CAT6 has the ability of pre-emphasis and equalization and achieves distances of an HDMI signal of ~100 feet with the proper cables.

WolfPack 1X8 HDMI Splitter via CAT6 Specs:

Frequency Bandwidth 1.65Gbps
HDMI Splitter Input/Output Ports 1x HDMI Female port/8 x CAT6
1x IR Transmitter/1x IR Receiver
Receiver Input/Output Ports 1 x HDMI Female port/1 x CAT6
1x IR Transmitter/1x IR Receiver
Power Supply HDMI Splitter DC 5V 2A
ESD Protection Human Body Model: 8kV (air-gap discharge) 4kV (contact discharge)
Dimensions (mm) Splitter: 112(W) X 258 (D) X 256(H) Receiver: 49(W) X 81 (D) X 25 (H)
Weight Splitter: 750g
Receiver: 150g x 4
Operating Temperature: 0 ~ 40 / 32 ~ 104
Operating Temperature: 0 ~ 40 / 32 ~ 104
Storage Temperature: -20 ~ 60 / -4 ~ 140
Relative Humidity: 20 ~ 90% RH (Non-condensing)
Power Consumption (Max): HDMI Splitter 10W x1 and Receiver 5W x8

1X8 HDMI Splitter via CAT6 Contents:

1x8 HDMI Splitter: 1PC
Receivers: 8PCS
Wideband IR Tx: 1PCS
Wideband IR Rx: 8PCS
5V2A DC Power Supply adapter: 1PCS
5V1A DC Power Supply adapter: 8PCS
Operation Manual: 1PCS

Why not buy this WolfPack 1X8 HDMI Splitter over CAT6 today?

Don't use EZ45 Connectors

CAT6 Installation Tips (Don't Use Patch Panels)

WHAT I NEED TO KNOW ABOUT EDID

Why not buy this 1X8 HDMI Splitter over CAT6 today?

NOTE: The transmission length is largely affected by the type of LAN cables, the type of HDMI sources, and the type of HDMI display. Our testing results show solid LAN cables (usually in bulk cable 300m or 1000 ft form) can transmit a longer signal than stranded LAN cables (usually in patch cord form).

Shielded (STP) cables are better suited than unshielded (UTP) cables. A solid UTP CAT6e cable allows a longer transmission length than a stranded STP CAT6 cable. For long extension users, solid LAN cables should be your only choice.

To reduce the interference among the unshielded twisted pairs of wires in an LAN cable, you can use shielded LAN cables to reduce EMI problems, which is worse when you have long transmission distances. Because the quality of the LAN cables has major effects in transmission distance, always use high quality cables. For resolution greater than 1080i or 1280x1024, a CAT6 solid wire cables are recommended.

Why not buy this WolfPack 1X8 HDMI Splitter over CAT6 today?

Q: Will this WolfPack 1 in, up to 8 out HDMI Splitter over CAT6 work with only one display turned ON?
A: Yes, the eight outputs are independent and the 1 in, up to 8 out HDMI Splitter over CAT6 works even when only one display is turned ON. Many HDMI splitters have synchronized outputs which require all displays to be turned ON at the same time for those splitters to work.

The HDMI Splitter over CAT6 with User Adjustable EDID will mix the EDID data of all connected sink devices like a widescreen and send this mixed EDID to the HDMI source device. EDID mixing allows all all the connected sink device to have video and audio they can display or output.

Example: One TV is 1080p and stereo, another is 1080i and 5.1 audio. The mixed EDID will be 1080i and stereo audio.