HDTV Supply's WolfPack™ 8K 2x1 HDMI Switch manually switches 2-8K 60 or 2-4K 120 sources to a display supporting those resolution & frame rates. The 8K 2x1 HDMI Switch uses a knob to switch between the inputs and does not have a remote control. If you need additional inputs on your 8K TV or want to connect several 8K 60 Hz or 4K 120 Hz devices to one port on your 8K 60 Hz or 4K 120 Hz display, than this should work for you.
HDTV Supply has tested our WolfPack 8K 2x1 HDMI Switch with these 8K devices:
- 8K Sony PS5
- 8K Xbox X
- Nvidia 3090
- 8K TV from Samsung
This switch can only be used to switch 2-inputs to 1-output and cannot be used backwards to send one input to two outputs. Active switches like this is are better than passive switches as they give a better picture. Also, please use 8K cables with this switch with a maximum length of 10 feet.
Examples that will work:
- One 4K / 120hz input on a Sony Z9G and want to switch a PS5, & Xbox Series set at 4K 120
- All devices are 8K 60 switched to an 8K 60 TV (No down scaling)
- NOTE: The device does not support Atmos audio
8K 2x1 HDMI Switch Features:
- Up to 8K60 YCBCR 4:2:0 10bit, 8K30 RGB/YCBCR 4:4:4 10bit or
- 4K120 RGB/YCBCR 4:4:4 10bit
- HDR, Dolby Vision & ALLM / VRR (Variable Refresh Rate) pass through
- HDMI 2.1, HDCP 2.3 & 40Gbps compliant
- Quick Frame Transport (QFT)
- Up to LPCM 7.1CH, Dolby TrueHD & DTS-HD Master Audio
- 2 - 8K HDMI Inputs & 1 - 8K HDMI Output
- Built-in Equalizer, Retiming and Driver