WolfPack 4K 30 Hz 1x10 POE HDMI over IP Splitter to 330 Feet with IR

WolfPack

4K 30 Hz 1x10 HDMI over IP POE Splitter
$1,325.00
Part Number:
1X10-IP-SPLITTER
UPC:
728370342048
Availability:
In Stock
1:
4K 30 Hz 1x10 HDMI over IP Splitter
2:
Sends & Receives 4K 30 Hz UHD 330' w/Zero Latency
3:
POE Design & Field Expansion to more TVs
4:
30-Minute Install Showing Gorgeous 4K 30 Hz Video
ADD OPTIONS:
HDTV Supplys WolfPack™ 4K 30 Hz 1x10 HDMI over IP POE Splitter is a simple to install, preconfigured 1x10 HDMI distribution amp using a POE Ethernet switch.

What sets this 4K 30 Hz POE 1x10 HDMI over IP Splitter apart from others:

  • 4K/30 UHD Compliancy
  • POE Design - No AC Adapters Needed
  • Supports HDMI In & Out
  • Zero Latency
  • Sends 4K HDMI up to 330 feet
  • Field upgradable to 253 - 4K TVs
  • No software needed, plug-n-play

This POE HDMI video splitter over IP allows for the distribution and switching of high definition 4K video signals using off-the-shelf Gigabit IGMP POE switches. This WolfPack HDMI over IP Extender uses POE Gigabit IP network technology to process and distribute 4K ultra-high-definition video signals. The WolfPack HDMI extender supports POE point-to-point or 1-TX to 253 RXs over gigabit PoE switch and can also support multi-slave control of a host's networking.

WolfPack 4K 1x10 HDMI over IP Splitter is preconfigured with:

  • 1 - 4K HDMI to LAN POE Transmitter (TX)
  • 10 - 4K LAN to HDMI POE Receivers (RX)
  • 1 - Companion 16 port POE Ethernet switch

The HDMI over IP POE Splitter resolution supports 4K@30Hz 4:2:0 Ultra HD and is completely lossless, has low latency, supports full-format HDMI audio, fully meets the audio-visual needs of high-end customers. A POE Gigabit switch is included.

Why not buy this WolfPack 4K 1x10 HDMI over IP Splitter today?

You don't have to have any IP or LAN knowledge as there are no settings you have to worry about, just Plug-N-Play. This preconfigured 4K 1x10 HDMI over IP Splitter allows for the distribution of high definition 4K video and audio signals using off-the-shelf Gigabit IGMP managed switches. The 4K 1x10 HDMI over IP Splitter uses advanced HDbitT technology supporting video resolutions up to 4K Ultra HD. It can be used in Churches, Factories, Restaurants, Sport Bars and more.

HDMI over IP Splitter Transmitter & Receiver Features:

  • Plug and play.
  • Apply advanced POE over IP technology.
  • Transmission distance is up to 100 meters or 330 feet via CAT6
  • Resolution supported is up to 4K@30Hz ultra HD.
  • Supports L/R stereo audio.
  • Supports up to 253 receivers.
  • Compliant with HDMI 1.4 and HDCP 1.4 standards.
  • Audio and video are transmitted digitally over an 100 Ohm CAT6 cable for lower signal loss.
  • 10/100Mbps POE Ports Switch
  • HDMI signal: HDMI 1.4 and HDCP 1.4 compliant
  • HDMI input resolutions supported:
    • 480p@60Hz
    • 720p@50/60Hz
    • 1080p@30/50/60Hz
    • 4Kx2K @30Hz
  • Audio format supported: L/R stereo audio
  • TMDS signal: 0.7~1.2Vp-p
  • DDC signal: 5Vp-p
  • Color: Black

The 4K 1x10 HDMI over IP Splitter uses advanced technology supporting a video resolution up to 4Kx2K@30Hz Ultra HD. Configure any-size HDMI splitter using HDMI over IP receivers with only the number of ports available on the Ethernet LAN switch limiting the in & outs of your design. Multiple receivers can simultaneously connect to a transmitter to form a virtual HDMI splitter with up to 253 HDMI receivers (TVs).

Why not buy this 4K 1x10 HDMI over IP Splitter today?

User Manual

Don't use EZ45 Connectors

CAT6 Installation Tips (Don't Use Patch Panels)

Why not buy this 4K 1x10 HDMI over IP Splitter today?

Frequently
Reasons To Buy an HDTV Supply WolfPack Product

Why not buy this 4K 1x10 HDMI over IP Splitter today?

What Is a WolfPack Fixed HDMI Matrix Switcher?

A WolfPack Fixed HDMI Matrix Switcher is a single-chassis device that routes any HDMI source — such as a cable box, satellite receiver, streaming player, or computer — to any TV or display in a building, simultaneously and independently. Unlike an HDMI splitter (which sends one source to many screens) or a simple HDMI switch (which selects one source for one screen), a matrix switcher lets you show a different channel on every TV at the same time. HDTV Supply has sold WolfPack fixed matrix switchers to sports bars, restaurants, hotels, churches, schools, and commercial AV integrators since 2000.

Fixed vs. Modular: Which Do You Need?

WolfPack comes in two families: Fixed and Modular. Fixed matrix switchers have a set number of inputs and outputs built into one box — for example, 4 inputs × 4 outputs (4×4) or 8 inputs × 8 outputs (8×8). They are plug-and-play, rack-mountable, and the right choice when your input/output count won't change. Modular matrix switchers use a chassis with swappable I/O cards, scaling from a few ports up to 80×80 or beyond. If you know exactly how many sources and screens you need today, a fixed unit is typically lower cost and simpler to deploy.

Available Fixed WolfPack Configurations

HDTV Supply offers WolfPack Fixed HDMI Matrix Switchers in the following sizes:

  • 4Ă—2 — 4 sources to 2 displays
  • 4Ă—4 — 4 sources to 4 displays
  • 8Ă—8 — 8 sources to 8 displays
  • 8Ă—9 — 8 sources to 9 displays
  • 16Ă—16 — 16 sources to 16 displays
  • 16Ă—32 via CAT6 — extends signal up to 450 feet over CAT6 cable

Select models include built-in video wall processing, multiview, and picture-in-picture (PIP) — allowing two or more sources to display on a single screen simultaneously.

Control Options for Fixed Matrix Switchers

Every WolfPack Fixed HDMI Matrix Switcher supports multiple control methods so you can integrate it into any environment:

  • Front-panel buttons — manual source switching directly on the unit
  • IR remote control — included with most models
  • RS-232 serial control — for integration with Crestron, Control4, AMX, and similar systems
  • TCP/IP (LAN) control — send hex commands over your network from any device
  • Web GUI — browser-based interface for switching without additional software
  • Free iOS and Android apps — available for select WolfPack models

For RS-232 hex command strings and TCP/IP control protocols, see our WolfPack HEX Code Reference and TCP/IP Control Guide.

Frequently Asked Questions

What is the difference between a fixed HDMI matrix switcher and a modular HDMI matrix switcher?

A fixed HDMI matrix switcher has a set number of HDMI inputs and outputs built into a single unit — for example, 8 inputs and 8 outputs. A modular matrix switcher uses a chassis with interchangeable I/O cards, so you can configure it for many different port counts and expand it later. Fixed units are simpler and more affordable; modular units offer flexibility for larger or changing installations.

Can a WolfPack fixed matrix switcher show different channels on different TVs at the same time?

Yes. A matrix switcher routes any input to any output independently. In an 8×8 configuration, all 8 displays can show 8 completely different sources simultaneously, or multiple displays can share the same source — in any combination you choose.

Can I control a WolfPack fixed matrix switcher from a Crestron or Control4 system?

Yes. WolfPack Fixed HDMI Matrix Switchers support RS-232 and TCP/IP control, which are standard integration protocols supported by Crestron, Control4, AMX, and other third-party control systems. HDTV Supply provides hex command strings and driver documentation to support custom integrations.

What resolution do WolfPack Fixed HDMI Matrix Switchers support?

Resolution support varies by model. WolfPack fixed matrix switchers are available in 1080p (Full HD) and 4K 30Hz configurations. Select 4K models also support HDR and HDCP 2.2. Always check the individual product specification sheet for confirmed resolution, color depth, and HDCP version.

How far can I run HDMI from a WolfPack fixed matrix switcher?

Standard HDMI outputs on fixed matrix switchers support runs up to approximately 25–50 feet depending on cable quality and resolution. The WolfPack 16×32 model transmits over CAT6 cabling for distances up to 450 feet per run. For longer distances with other fixed models, HDMI extenders can be added at each display.

What is the best HDMI matrix switcher for a sports bar?

For sports bars with up to 16 TVs, a WolfPack Fixed 16×16 HDMI Matrix Switcher is a popular choice — it handles 16 independent sources (cable boxes, satellite receivers, streaming devices) and routes any of them to any TV. For larger venues with 20–80+ TVs, HDTV Supply's WolfPack Modular Matrix Switchers or AV Over IP systems are typically the better fit. Call 833-WOLFPACK (833-965-3722) for a free consultation.

Need Help Choosing?

HDTV Supply has been helping AV integrators, sports bars, hotels, and homeowners select the right matrix switching system for 25 years. Call us at 833-WOLFPACK (833-965-3722) or email kent@hdtvsupply.com and we'll recommend the right unit for your source count, display count, resolution requirements, and control system.