This 1080p 8X8 Component Video + Digital/Analog Audio Matrix Switcher with RS-232 is designed to work as a switcher for multiple Audio/Video sources and displays. It switches any input to any output, or the same input to be routed to all outputs, or any combination. Because it is a matrix switcher, it allows any input to be routed to any output; or the same input to be routed to all outputs or any combination.

8X8 Component Video + Digital / Analog Audio Matrix Switcher Features:

• EXCLUSIVE NEW 2013 MODEL: DirecTV has ALWAYS had DC voltage on the output of their HD receivers. This new model was redesigned completely to prevent DC getting into the matrix.
• Switches Component Video (Y-Pb-Pr, Y-Cb-Cr, RGB and Digital (PCM & S/PDIF) and analog right and left audio between multiple sources and displays.
• Allows connection of 8 sources and 8 displays
• Supports resolutions 480i, 480p, 576p, 720p, 1080i/60 and 1080p
• 8X8 high speed crosspoint switch matrices
• Buffered inputs
• Eight output amps to drive 100+ foot cables
• Operate via front panel buttons or IR remote control
• Installs in seconds

This 8X8 matrix switcher allows any 8 of the 8 component video and audio inputs to be switched to any of the 8 independent component and audio outputs and is perfect for a bar, restaurant or multi-room home theater system.

EXAMPLE: Watch a DVD in your den while someone else simultaneously watches high definition cable or satellite in the bedroom. Both the DVD player and the high definition receiver are in the den.

NOTE: If you don't need to switch audio see our incredibly priced $475 8X8 Video (only) Matrix Switcher.

This 8X8 component video matrix switch is capable of switching component video, S/PDIF and right & left stereo audio signals between eight sources and eight displays with compatible inputs. A maximum bandwidth of 325MHz will support a sharp and highly defined video in multiple resolutions of up to 1080p. Because it is a matrix switcher, it allows any input to be routed to any output; or the same input to be routed to all outputs or any combination. Optionally, the digital audio section can be used for switching composite video in the same zone. Some security cameras use composite video so you can integrate a security system using this matrix switcher. The 8:8 Matrix Switcher works with all video equipment that has proper connections, such as cable and satellite receivers, computers, video scalers, DVD players, VCR's and so on.

This matrix switch can upgraded to an 8X16 and 8X24 by buying the appropriate amount ( 8 for an 8X16 and 16 for an 8X24 ) of front end 1x4 component splitters. If you need info on how to wire it just call us at 800-841-9238 or email support @ hdtvsupply.com . Y-cables may work also.

It completely eliminates the need to constantly move around video input and output cables. The RS-232 control allows the switcher to be controlled by a computerized system such as HTPC and in this case eliminates the need for an infrared remote control. Control of this switcher can be managed via its front-panel control, IR remote control, RS-232, or our optional RS-232 to Ethernet Converter. The RS-232 to Ethernet Converter allows control of the unit from anywhere in the world given you know how to write RS-232 code and have the correct serial Ethernet hardware.

NOTE: This component video matrix switch ships in the U.S. by FEDEX regardless of the type of shipping you chose and will ship at the delivery time you chose.

Your video is only as good as the switcher that connects it. Why not buy this 8X8 Component Video + Digital / Analog Audio Matrix Switcher today?