Welcome to HDTVSupply.com FREE CONSULTATION: Call For Advice To Solve Your AV Needs Free Lifetime Live Tech Support - 800-841-9238
TEXT Us Via a TEXT APP to 805-409-0208
Home  //  CABLES  //  LONG CABLES   //  125 Foot HDMI Cable with a built-in Booster & AC Adapter

125 Foot HDMI Cable with a built-in Booster & AC Adapter

125 Foot HDMI Cable with a built-in Booster & AC Adapter
125 Foot HDMI Cable with a built-in Booster & AC Adapter

125 Foot HDMI Cable w/built-in Booster & cable locking screw

Includes an AC Adapter to boost the signal even more if needed

2 Video Equalization Adjustment switches for a better picture

Order Information
Part Number:EXT-HDMISB-125
Today's price:$399.95 (You Save: 20%)
Availability:Usually ships the same business day
30 Day Returns
Same Day Shipping
135,000+ Items Shipped
100% Safe SSL Shopping
63,000+ Happy Customers
Free Lifetime Tech Support
Over 7,600 ✭✭✭✭✭ Reviews
Choose From Over 7,000 Items
Live U.S. Telephone Tech Support


The 125 Foot HDMI Cable with a built-in Booster is a copper cable based solution with an integrated HDMI Super Booster, available in the lengths of 50, 75, 100, 125 and 150 feet. The 125 Foot HDMI Cable with a built-in Booster for HDMI offer the highest resolutions possible up to 1080p. HDMI digital audio is also supported by this cable and allows for the highest possible quality A/V experience with zero signal loss.

125 Foot HDMI Cable with a built-in Booster Features:

  • Lip Sync Pass Through
  • 225 MHz (up to 12 bit YUV 444 @ 1080p)
  • Deep Color Supported
  • Dolby TrueHD & DTS Master Audio
  • CEC Source Switching Enabled
The 125 and 150 foot cables will not support HDMI Deep Color at 1080p/50hz/60hz.

An in-line equalization Trim Pot (Potentiometer) can be used to manually fine tune the video signal coming from the source device. If there is noise or no picture, adjusting the Trim Pot can resolve the issue. There is also a small bank of switches underneath the booster chassis known as DIP switches. To use them to adjust the video behavior, use a small pointed object to push the switches ON or OFF.

HDTV Resolutions Supported: 480i, 480p, 720p, 1080i, 1080p. Only cables up to 100 ft will support HDMI 1.3 at 1080p.

Computer Resolutions Supported: These cables will support a maximum resolution of up to 1920x1200 @ 60 Hz.

A Note on Power: This plug and play installation takes mere seconds. Simply connect the locking male HDMI connector to your HDMI source. Connect the other side of the cable having the flat metal 125 Foot HDMI Cable with a built-in Booster for HDMI to the HDTV.

Occasionally a video source will not be sufficiently strong to power the 125 Foot HDMI Cable w/built-in Booster. A universal power supply is included with each 125 Foot HDMI Cable w/built-in Booster to prevent this from happening.

Why not buy this 125 Foot HDMI Cable with a built-in Booster today?

This 125 Foot HDMI Cable with a built-in Booster & AC Adapter works with the following devices:

  1. Any high definition Dish Network and DirecTV receiver with HDMI outputs
  2. High definition TiVo's with HDMI outputs
  3. Any high definition cable receiver with HDMI outputs
  4. Canadian Rogers, Shaw, Bell ExpressVu and Star Choice receivers with HDMI out, or DVI out with a converter
  5. Any "Over The Air" (OTA) high definition receiver with HDMI outputs
  6. Sony PS3, HD DVD and Blu-ray DVD players
  7. Any Xbox360 with HDMI outputs
  8. Any upconverting DVD player with HDMI outputs
  9. Any DVHS VCR with HDMI outputs
  10. Both APPLE-TV's with HDMI outputs
  11. A Boxee with HDMI ouputs
  12. A VuDu with HDMI outputs
  13. A Roku with HDMI outputs
  14. Many PC video cards with HDMI outputs
  15. Any high definition camcorder with an optional type C to standard HDMI cable
  16. Many A/V surround sound receivers with HDMI switching that include the proper chip set and output amp. Call your AV receiver supplier to discuss your application or us.
  17. Any HDCP compliant HDTV, monitor and projector. If the source is HDCP compliant and your TV is not, you will not get a picture. Please check your TV manual or the manufacturers web site.
  18. and other similar devices.

Our HDMI cables have 19 copper wires in them and those wires are wave soldered to 19 very small connectors at each end. These cables have been tested at the factory and right before they go directly into your shipping container so you can be assured they will work for you.

Here are some tips to install the cable(s) to have a successful installation:

1. DO NOT, REPEAT, DO NOT PULL THE CABLE BY ITS CONNECTORS TO INSTALL IT AS YOU MAY PULL THE CONNECTOR(S) OFF. Cables that are pulled this way are not returnable and your warranty is voided.

2. Lay the cable on the floor first and install a test set up of your equipment. This may mean moving equipment closer than the actual installation but problems will be easier to diagnose if the cable is not installed in the wall.

3. Wrap the HDMI connectors with a freezer bag tied tight when installing the cable in the wall. REMEMBER DO NOT PULL THE CABLE BY ITS CONNECTORS TO INSTALL IT AS YOU MAY DAMAGE THE CONNECTOR(S) and void your warranty.

4. If you bought a cable with a built in booster, either check the writing on the cable connector for where to install it, or put the BOOSTER END at the TV, not the source, like a DVD player. These HDMI cables that have boosters work only when the booster is placed at the end, or near the HDTV, not at the source device. The HDMI booster is placed near the display to remove any noise that has been generated by a long HDMI cable.

5. If you don't get a picture, or sound, and have other devices in series with the cable put them aside and connect the HDMI cable directly between the source device and the HDTV. If you still don't get a picture try another source device like a cable/sat receiver.

6. If an outside installer is doing work for you please print this out, give to him and remind him not to pull the HDMI cables by their ends to install it.

7. If you use staples to install the long cable YOU WILL VOID YOUR WARRANTY and it cannot be returned. Staples will harm the 19 copper wires inside the cable, along with the shield that surrounds them.

8. Cables that are installed in the wall are not returnable so check the cable of the floor first.

If you follow the above instruction and have a question call us at 800-841-9238.

HDTV Supply includes a 30 day Limited Warranty on all Gefen copper cables. The warranty states that (a) its products will perform substantially in accordance with the accompanying written materials for a period of 30 days from the date of receipt and (b) that the Product will be free from defects in materials & workmanship under normal use & service for a period of 30 days. In order to get a warranty replacement for a defective item, Gefens and HDTV Supplys Team will verify the product is eligible for warranty. An RMA number will then be issued. Shipped replacements will be in like new conditions, tested and all components included.

HDTV Supply also sells a 3 or 5 Year extended warranty for this product. Please go to 5 Year Extended Warranty or see the above Options to purchase it.

125 Foot HDMI Cable with a built-in Booster & AC Adapter

Questions & Answers

Ask a question about the 125 Foot HDMI Cable with a built-in Booster & AC Adapter or Call 800-841-9238

Your email:
Your question:

125 Foot HDMI Cable with a built-in Booster & AC Adapter

Recently Viewed Items