This HDTV Supply HDMI Extender over HDBaseT™ (single CAT6/7) is a tool for extending your HDMI signal over long distances to a compatible display. It is designed to convert HDMI signal to standard HDBaseT™ signal and transmit by dedicated CATx cable. It also supports bi-directional infrared (IR) signal together with the HDMI signal, so you can control the source device or the display. The ANI-HDB70 operates at 1080p up to 230 ft (70M), 4K up to 130 ft (40M): using a CAT6 or better. The greatest feature is the PoH (Power over HDBaseT™) also known as PoE (Power over Ethernet or PoCC Power over Category Cable).
You only need one power supply (included) that provides power to both the transmitter and the receiver. You can install the PoH power supply on either the Transmitter or the Receiver. This product has a 3 year warranty.
FEATURES
- Transmits for a distance of up to 230 ft (70M)
- One pair is a fully functional module, no need for setting DIP switches
- POE (Power Over Ethernet) function supports, either TX or RX powered by a DC 24V@1A
- Consumption is less than 10W
- Uses a single UTP/STP LAN cable CAT6/7 to substitute the HDMI cable to achieve long distance transmission
- UTP/STP cable termination follows IEEE-568B standards. Not compatible with EZ-RJ45® connectors
- Transmission Distance:
- 230 ft (70M): 1080p@60Hz@36bit; 3D 1080p@30Hz@36bit
- 130 ft (40M): 1080p@60Hz@48bit; 1080p@120Hz@24bit; 3D 1080p@60Hz@36bit
- 130 ft (40M): 4K2K@30Hz@24bit
- HDMI V1.4 supported & HDCP compliant
- Full HD support: 1080p@60Hz@48bit/pixels, 1080p@120Hz@24bit/pixels, 3D 1080p60Hz and 4K2K@30Hz@24bit
- Bi-directional infrared control signal together with the HDMI signal
- Full 3D pass through
- High EMI rejection for compatibility even in challenging installations
- Supports all embedded audio signals including Dolby TrueHD and DTS-HD Master Audio
- The HDTVHBTE70 is not compatible with EZ-RJ45 connectors
