EXAMPLE: Watch a DVD in your den while someone else simultaneously watches high definition cable or satellite in the bedroom. Both the DVD player and the high definition receiver are in the den.
NEW FIRMWARE FOR 2017:
- Supports display resolutions up to 4kx2k @ 30Hz, 1080p@120Hz and 1080p 3D@60Hz
- Supports 3D HDMI 1.4a video format
- 3D video support including frame packing for all 3D formats up to a 297MHz TMDs clock
- Supports deep color up to 48-bit per pixel HDCP 1.4 support (input), HDCP v1.4a protocol compliant (output)
- Supports the reception of any audio data conforming with the HDMI specification 1.4 such ad L-PCM at up to 192kHz, compressed audio (IEC 61937), DSD, DST, DTS and HBR
- Full colorimetry including sYCC601, Adobe RGB, Adobe YCC601, xvYCC extended gamut color
- Supports 1080p TV's at 24/30/60/100/200/240 Hz and above as well as Blu-rays at 24 and 60 FPS
- 18 key remote control control.
- Built-in HDMI booster to boost HDMI signal lengths per below:
- HDMI Cable 22AWG - 50 foot Input / 50 foot Output
- HDMI Cable 24AWG - 30 foot Input / 30 foot Output
HDMI Matrix Switch with Booster Features:
- 4 HDMI inputs
- 2 HDMI outputs
- Supports HDMI Digital video & audio
- Supports EDID pass-through
- Supports up to 1080p, the highest resolution available with the PS4 and many new HDTV's.
- Supports DVI-D (Not DVI-A and maybe DVI-I) Single link Digital video with a DVI to HDMI adapter
- Supports 1080p TV's at 24/30/60/100/120/200 Hz and above as well as Blu-rays at 24 FPS
- Comprehensive HDCP 1.4a compliant support for best-in-class compatibility
- Maximum compatibility with all types of HDMI and DVI devices
- Plug & play installation.
- Black color
- Input Video Signal: 1.2 volts p-p
- Input DDC Signal: 5 volts p-p (TTL)
- Stackable: 1080p cascade above 6 layers
- Supported video color format: Supports deep color up to 48-bit per pixel with full colorimetry, including sYCC601, Adobe RGB, Adobe YCC601, xvYCC extended gamut color.
- Compatible with all HDMI-equipped, HDCP-enabled HDTV devices.
- HDMI input connectors: 4
- HDMI output connectors: 2
- Compatible with all DVI, HDMI V1.1, V1.2, V1.3 and HDMI 1.4 signals
- Supports 4K, 1080p/i, 720p/i, 480p/i, SXGA, UXGA, XGA, SVGA, and VGA resolutions
- Comes with a remote control for easy operation
- One year warranty
This HDMI Matrix Switch can also be used to switch DVI using the above DVI to HDMI cables or the above DVI to HDMI adapters. DVI does not transmit audio so you must wire it separately.
Why not buy the HDMI matrix Switch with booster today?
How the HDMI Matrix Switch with booster Works:
You simply connect the 4 sources to the Matrix switcher inputs. Then connect 2 displays to the Matrix switcher outputs. Once the sources, the matrix and the displays are powered and connected, you simply select which sources you want to view on which displays using the IR remote control.HDMI Matrix Switch with Booster Specs:
- Frequency Bandwidth: 2.97Gbps
- Input Ports: 4 x HDMI Female input ports
- Output Ports: 2 x HDMI Female output ports
- Power Supply: DC 5V 1A
- ESD Protection Human Body Model: - 8kV (air-gap discharge)/ + 8kV (air-gap discharge); - 4kV (contact discharge)/ + 4kV (contact discharge)
- Dimensions (mm): 85(W) X 192 (D) X 26 (H)
- Weight(g): 450
- Operating Temperature: 0 degree Celsius ~ 40 degrees Celsius / 32 Fahrenheit degrees Celsius ~ 104 Fahrenheit degrees Celsius
- Storage Temperature: -20 degrees Celsius ~ 60 degrees Celsius / -4 Fahrenheit degrees Celsius ~ 140 Fahrenheit degrees Celsius
- Relative Humidity: 20 ~ 90% RH (Non-condensing)
- Power Consumption (Max): 5W
The audio portion of this HDMI switcher is compliant with the following audio standards:
- Dolby Digital
- Dolby Digital Plus
- Dolby TrueHD
- DTS
- DTS-HD
Multi-channel digital audio and high definition video are fed to the display by each source (shown below), when selected. Users have the option of switching sources using front panel buttons or the IR remote that comes with the unit.
TIPS TO INSTALL THIS HDMI MATRIX SWITCH WITH BOOSTER:
- Unplug all devices that plug into the unit including the above HDMI switcher.
- Install only one device and one HDTV. Turn them ON.
- Wait up to 15 seconds to allow the first install to grab the HDCP handshake.
- If you don't get a picture move the HDMI cable to another input until you do waiting 15 seconds.
- If you still don't get a picture, move the output HDMI cable to another output.
- Add the 2nd device using the above tips.
- In order to see HDTV with HDCP compliance, both the source, the cable, the display and any device in between must be equipped with HDMI connections that can enable HDCP decoding, such as this 1080p HDMI matrix switcher, or you will not see a picture.
- The older the HDMI gear the more handshaking problems are likely. Cable boxes are among the worst. Powering off the switcher usually helps. Make certain not to send a video signal to a display which is out of range like 1080p signal to a 720p projector.
Why not buy the HDMI matrix Switch with Booster today?
This HDMI Matrix Switch with Booster can be used with:
- All HDMI 1.4 compliant devices as well as with older 1.0, 1.1, 1.2 and 1.3 versions
- Any high definition Dish Network and DirecTV receiver with HDMI outputs
- High definition TiVo's with HDMI outputs
- Any high definition cable receiver with HDMI outputs
- Canadian Rogers, Shaw, Bell ExpressVu and Star Choice receivers with HDMI out, or DVI out with a converter
- Any "Over The Air" (OTA) high definition receiver with HDMI outputs
- Sony PS3, HD DVD and Blu-ray DVD players
- Any Xbox360 with HDMI outputs
- Any upconverting DVD player with HDMI outputs
- Any DVHS VCR with HDMI outputs
- An APPLE TV with HDMI outputs
- A Vudu with HDMI outputs
- A Roku with HDMI outputs
- Many PC video card with HDMI outputs
- Any high definition camcorder with an optional type C to standard HDMI cable
- Many A/V surround sound receivers with HDMI switching that include the proper chip set. Call your AV receiver supplier to discuss your application or us.
- Any HDCP compliant HDTV, monitor and projector. If the source is HDCP compliant and your TV is not, you will not get a picture. Please check your TV manual or the manufacturers web site.
- and other similar devices.
4X2 HDMI Matrix Switch with Booster Package Contents:
- HDMI Matrix Switch
- Remote Control
- Power Adapter
- Operating Instructions
Why not buy the HDMI matrix Switch with Booster today?
Read more at WHAT I NEED TO KNOW ABOUT EDID
Q: Will your HDMI Matrix Switch allow a DirecTV or Time Warner Cable to show a TV program in 2D to a 3D capable display and at the same time, allow a Blu-Ray to show 3D on a different 3D display?
A: Yes, any 3D capable display will accept a 2D signal and this 4-4 HDMI Matrix Switcher does discriminate against 2D or 3D.