This Blustream DA11ABL-WP-US Bluetooth & Analog Audio Dante® Wall Plate US is a multi-input / output wall plate to convert Bluetooth and analog audio within a digital Dante® networked audio system.

The DA11ABL-WP-US converts 2 input channels of Bluetooth or unbalanced audio to Dante® digital audio, and 2 channels of Dante® audio to 2 x output channels of unbalanced audio.

The DA11ABL-WP-US is a plug & play device that is powered using PoE (Power over Ethernet), or via 12V power supply, offers support for AES67 RTP audio transport and magnetic faceplate design allows installation into most single-gang US junction boxes.

The DA11ABL-WP-US is the ideal BYOD interface to allow any Bluetooth device to stream audio wirelessly to a Dante® audio system.

Blustream DA11ABL-WP-US Bluetooth & Analog Audio Dante® Wall Plate US Features:

Dante® network wall plate interface for Bluetooth and analog L/R audio inputs, and L/R audio outputs
Converts 2ch Bluetooth, or un-balanced audio sources to Dante® audio
Converts 2x Dante® audio channels to un-balanced audio outputs
Adjustable input sensitivity from +24dBu to -28dBV via control software
Adjustable output gain from +20dBu to -28 dBV via control software
Supports: 44.1, 48 & 96kHz sample rates @ 16, 24 or 32 Bit
Configurable Dante® device latency (supports 1, 2 or 5ms configurable using Dante® Controller)
Supports AES67 RTP audio transport
Features Class 0 IEEE 802.3af PoE for powering of product from any PoE switch
Supports power via 12V DC adapter (not included) for when network switch does not support PoE
Magnetic faceplate surround and US Decora style backbox compatibility

*Dante® is a registered trademark of Audinate Pty Ltd

Why not buy this Blustream DA11ABL-WP-US Bluetooth & Analog Audio Dante® Wall Plate US today?

Blustream DA11ABL-WP-US Bluetooth & Analog Audio Dante® Wall Plate US Specifications:

Audio Input Connections: 1 x Analog Left / Right audio (3.5mm stereo jack)
Audio Output Connections: 2x Analog RCA (Left / Right)
Network Connection: 1 x PoE Dante® Ethernet Connection (RJ45)
Bluetooth Connection: Bluetooth V5.0 - SBC / MP3 / AAC / APT-X / APTX-LL / APTX-HD, 44.1K-48KHz 16 / 24Bit
Module Dimensions (W x H x D): 50mm x 104mm x 48mm (without faceplate)
Faceplate Dimensions (W x H x D): 70mm x 155mm x 5mm
Cut Out Dimensions (W x H x D): 46mm x 56mm x 39mm
Mounting Hole Spacing: US 83mm CTC
Backbox Requirements: US single gang junction box
Shipping Weight: 0.5 Kg
Operating Temperature: 32°F to 104°F (0°C to 40°C)
Storage Temperature: - 4°F to 140°F (- 20°C to 60°C)
Power Supply: Class 0 IEEE 802.3af PoE or 12v/1A DC 2-Pin Phoenix connector