This AVPro Edge AC-EXO-X-KIT 40Gbps 8K Fiber Optic Extender Kit is a pair of 40Gbps transmitter and receiver modules that extend HDMI 2.1 video and audio signals over a single multimode fiber optic cable. The maximum supported video resolutions are up to 8K 60Hz 4:2:0 or 4K 120Hz 4:4:4 with 7.1 audio. Supported HDMI 2.1 features include Auto Low Latency and Variable Refresh Rate, along with 16 EDID presets, auto-sense scaling on both secondary HDMI outputs, and a built-in test pattern that can be enabled using the dipswitches on the transmitter.
Critically acclaimed AVPro Edge extender features such as comprehensive EDID management, Dolby Vision, HDR10, HDR10+ and HLG support plus RS-232 / IR bi-directional pass-through are included. The AC-EXO-Kit includes dual-HDMI outputs, with HDMI 2 performing downscaling including auto-sensing.
In another watershed moment of unshakable clarity, the AC-EXO-X-KIT makes its auspicious entry into the rarified air of high-end video firsts, further solidifying AVPro Edge as a world-class leader in video signal retransmission technologies.
AVPro Edge AC-EXO-X-KIT 40Gbps 8K Fiber Optic Extender Kit Features:
- Multimode fiber grade OM2/3/4 compatible
- 8K 40Gbps bandwidth (8K/60 4:2:0) / High Frame Rate 4K/120fps
- HDMI 2.1 support for Auto Low Latency and Variable Refresh Rate
- Comprehensive EDID management for mixed-resolution Next-gen systems
- RS-232 and IR Bidirectional Passthrough
- Supports HDR formats, including Dolby Vision, HDR10 & HDR10+, and HLG
- Receiver features dual HDMI outputs with an always-scaled secondary output
- AVPro Edge’s custom algorithm monitors Fixed Rate Link status and restrains Link Training bandwidth reductions
- Fiber delivers a pristine image down to the last molecule of detail, an essential requirement for transporting content to 8K displays
Why not buy this AVPro Edge AC-EXO-X-KIT 40Gbps 8K Fiber Optic Extender Kit today?
AVPro Edge AC-EXO-X-KIT 40Gbps 8K Fiber Optic Extender Kit Specifications:
- Video
- Video Resolutions: Up to 8K 60Hz 4:2:0 / 8K 30Hz 4:4:4 / 4K 120Hz
- HDR Formats/Resolutions: 4:2:0, 4:2:2, 4:4:4 (10- and 12-bit deep color) HDR10, HDR10+, Dolby Vision, HLG
- Color Space: YUV (Component), RGB (CSC: REC.601, REC.709, BT2020, DCI, P3 D6500)
- Chroma Subsampling: 4:4:4, 4:2:2, 4:2:0 Supported
- Deep Color: Up to 16-bit (1080p) Up to 12-bit (4K)
- Scaling: Tx HDMI Loop Out: always 4k or 1080p downscaling, Rx HDMI Output 2: always 1080p downscaling
- Audio
- Audio Formats Supported HDMI: PCM 2.0 CH, LPCM 5.1 & 7.1, Dolby Digital, DTS 5.1, Dolby Digital Plus, Dolby TrueHD, DTS-HD Master Audio, DTS-X, Dolby Atmos
- Fiber
- Type: Multimode Fiber
- Connector: LC (Lucent Connector)
- Recommended Fiber: OM3 Cleerline SFF™ Fiber
- Distance
- OM2: p to 40M
- OM3: Up to 200M
- OM4: Up to 300M
- HDMI In/Out (40Gbps): Up to 4M (using Bullet Train© 48Gbps HDMI cable)
- HDMI In/Out with Bullet Train© AOC cable (40Gbps): Up to 100M (using Bullet Train© 48Gbps HDMI AOC cable)
- Other
- Bandwidth: 40Gbps (FRL5)
- HDCP: HDCP 2.3 and earlier
- Ports
- HDMI (Tx and Rx): Type A
- IR Transmit (Tx and Rx): 3.5mm Mono (TS) Jack
- IR Receive (Tx and Rx): 3.5mm Stereo (TRS) Jack
- RS-232 Control (Tx and Rx): 3-pin Terminal Block
- Power (Tx and Rx): 2-pin Terminal Block, USB-C
- Environmental
- Operating Temperature: 23° to 125°F (-5° to 51°C)
- Storage Temperature: -4° to 140°F (-20° to 60°C)
- Humidity Range: 5-90% RH (no condensation)
- Power
- Total Power Consumption: 2.5 Watts maximum
- Power Supply: Input: AC 100-240V ~ 50/60Hz, Output: DC 5V 1A
- Dimensions
- Height x Width x Depth (Standalone Unit, Tx and Rx are same): Millimeters: 64.88 x 100.1 x 16.1, Inches: 2.55 x 3.94 x 0.63
- Height x Width x Depth (Packaged Unit, Kit): Millimeters: 136.5 x 155.5 x 88.9, Inches: 5.375 x 6.125 x 3.5
- Weight (Standalone Unit, Tx or Rx each alone): 0.32 lbs (0.15 kg)
- Weight (Packaged Unit): 0.73 lbs (0.33 kg)
Why not buy this AVPro Edge AC-EXO-X-KIT 40Gbps 8K Fiber Optic Extender Kit today?
AvPro Edge AC-EXO-X-KIT User Manual