This Kramer C-UNIKat-200 CAT6a HDBaseT Cable (Blue) is terminated with SC connectors on each end to connect high-end networking equipment together. This 50/125um multimode fiber cable is designed for 40 Gbps standards and comes in the length of 820'. In addition, Kramer has covered this cable with a PVC jacket, which is suited for a broad range of environments.

Kramer C-UNIKat-200 CAT6a HDBaseT Cable (Blue) Features:

Conductors: 4 x 2 x 23 AWG, annealed copper
Conductor Outer Diameter: 0.56 ± 0.01mm
Insulation Material: Skin/foam/skin HDPE
Insulation Outer Diameter: 1.33 ± 0.1mm
Color: Per TIA/EIA 568-B
Screening: Alu/PET per pair (Alu side out)
Drain Wire: 90% tinned copper
Drain Wire Outer Diameter: 0.4 ± 0.01mm
Jacket: LSHF, blue RAL5012
Maximum Pulling Tension: 100 N
Bending Radius: Installation 2.36", Installed 1.97"
Operation Temperature: -4 to 140°F
Storage/Transport/Installation Temperature: 32 to 122°F
Impedance at 1 to 100 MHz: 100 ± 15 Ohms
Impedance at 100 to 250 MHz: 100 ± 20 Ohms
Impedance at 250 to 500 MHz: 100 ± 50 Ohms
Propagation Velocity: 76%
Capacitance Unbalanced Pair/Ground: ≤1500 pF/km
Pair Resistance Unbalance: DC <1.5%
Dielectric Strength: 2.5 kVDC (2s)
Insulation Resistance: >5000 MOhms/km
Voltage Rating: 30V
Over four individually screened twisted pairs, this U/FTP CAT6a cable runs Kramer's DGKat technology, 4K HDBaseT technology, or LAN applications
Designed to ensure optimum signal performance
23AWG solid copper conductors are cabled together in an unshielded outer jacket
Engineered for optimized use with Kramer's DGKat and HDBaseT hardware
Shielded RJ-45 connectors with 50u gold-plated contacts