The WolfPackLite™ 4K/30 24x16 HDMI Matrix Switch w/16-4K/30 HDBaseT CAT6 Extenders is a top of the line digital matrix switcher made for the demands of todays HDMI (High-Definition Multimedia Interface) routing. Created to route your systems HDMI signals to go to 16 outputs from 24 inputs the 24x16 HDMI Matrix Switch w/20-HDBaseT CAT6 Extenders delivers high performance.
The Card Cage chassis has 8 - HDMI input slots and 8 - HDMI output slots. The HDMI input and HDMI output cards are 4 - port HDMI cards having 4 - HDMI connectors on each card. If one populates the complete chassis it configures to a 24x16HDMI Switcher. Shown below is the configuration for this 4x20 HDMI Matrix Switch w/32-separate (TX & RX) HDBaseT CAT6 Extenders.
WolfPackLite™ 24x16 HDMI Matrix Switch w/20-HDBaseT CAT6 Extenders Configuration:
- 1 - 8 -card in and 8 - card out card cage
- 6 - 4 - port HDMI input cards = 24 - 4K/30 HDMI inputs
- 4 - 4 - port HDMI output cards = 16 - 4K/30 HDMI outputs
- 16 Sets - 4K Standalone 16-HDBaseT Transmitters (TX) and 16-Receivers (RX) to 220 feet at 1080p and 115 feet at 4K/30 w/POE
WolfPackLite™ 4K/30 24x16 HDMI Matrix Switch w/16-HDBaseT CAT6 Extenders Features:
- 4K/30 Switching of up to 24 HDMI sources to 16 displays
- 16-Presets to save for often used configurations
- HDCP and HDMI backwards compatible
- LCD front panel for status
- Supports 3D pass-through
- Supports High Speed HDMI 1.3 Specifications
- Supports full 4K/30
- Supports DDC transmission
- Supports Dolby Digital-True HD and DTS-HD
- Control via its remote control, RS-232 and front-panel buttons
- Full RS-232 control for incorporating third party control systems
Streaming between the source and display units is easily controlled through our HDMI 24x16 Matrix interface. HDCP key authentication will no longer be an issue when using our switcher. Control for our unit is varied and easily accessible. Enabled RS-232 commands is provided for advanced user control management. It also has optional Crestron Modules & Control4 Drivers.
Why not buy this WolfPackLite 4K/30 24x16 HDMI Matrix Switch w/16-HDBaseT CAT6 Extenders today?
WolfPackLite 4K/30 24x16 HDMI Matrix Switch w/16-HDBaseT CAT6 Extenders Specs:
- I/O card board: 4 - HDMI ports/card
- Input Connector: HDMI A female; T.M.D.S. 2.9V/3.3V, 75 ohms
- Video Output: HDMI A female; T.M.D.S. 2.9V/3.3V; 75 ohms
- Gain: 0 dB
- Resolution: Up to 4K/30
- Control Options: Buttons, IR remote & RS232 (9-pin female D connector)
- Worldwide Power Supply: 100VAC ~ 240VAC, 50/60Hz; 50W
- Temperature: -10 ~ 50 degrees C
- Working Humidity: 10 ~ 90 degrees
- Regulation: CE, FCC and CCC
WolfPackLite 4K/30 24x16 HDMI Matrix Switch w/16-HDBaseT CAT6 Extenders Specs:
- Gain: 0 dB
- Video Signal: HDMI (or DVI-D)
- Resolution Range: Up to 1080p 4:4:4 chroma
WolfPackLite 4K/30 24x16 HDMI Matrix Switch w/16-HDBaseT CAT6 Extenders Input:
- Inputs: 24 HDMI
- Input Connector: HDMI
- Input Level: T.M.D.S. 2.9V/3.3V
- Input Impedance: 75 ohms
WolfPackLite 4K/30 24x16 HDMI Matrix Switch w/16-HDBaseT CAT6 Extenders Output:
- Outputs: 16 HDMI
- Output Connector: HDMI
- Output Level T.M.D.S. 2.9V/3.3V
- Output Impedance: 75 ohms
Other WolfPackLite 4K/30 24x16 HDMI Matrix Switch w/16-HDBaseT CAT6 Extenders Specs:
- Input cable distance: ~25 feet AWG24 HDMI 1.4 high speed cable
- Output cable distance: ~10 feet AWG24 HDMI 1.4 high speed cable to the HDBaseT Transmitter
- HDCP Management: Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and HDMI 1.4 standards. The built-in HDCP management technology can analyze HDCP key authentication and realize the handshake internally.
- Serial Control Port: RS-232, 9-pin female D connector with a pin configuration of 2 = TX, 3 = RX, 5 = GND
- IR Remote: Yes
- Front Panel Control: Buttons
- 7U size
Why not buy this WolfPackLite 24x16 HDMI Matrix Switch w/16-HDBaseT CAT6 Extenders today?
Reasons To Buy an HDTV Supply WolfPack Product
Control Drivers
DirecTV Controller
These modular HDMI matrix switcher can usually be integrated with many third party control systems using the RS232 port on the back of the matrix.
For experienced hardware & software professionals who want to write their own drivers for 3rd party control systems from:
- AMX™
- Control4™
- Creston™
- RTI™
- DTVGameControl™
- Elan g!™
- Media switcher™
- OnControls™
- Savant™
- SimpleControl™
- SwitchItUp™
- SAVI Control™
- URC Control™
EXAMPLE: If you want to switch input 8 to output 1, 8, 16, the RS232 command would be 8V1.8V8.8V16 . See the RS232 section in this WolfPackLite Modular Matrix Switch User Manual if you want to write your own drivers.
How to use the info:
END USER: If you are an end user and want to have a whole-house control system from any of the above 3rd party control houses but your budget can't support the price you were quoted, do the following:
- Call us for a quote
- Once you get our quote call a 3rd party control reseller or installer in your area and tell them "Here is the hardware I want to use, please give me a quote on writing the software and installing all of the hardware at my location." You usually can save $1,000s on larger systems.
A: See WolfPackLite 4-Port HDMI Input & Output Cards for WolfPackLite Matrices.
Q: Does the matrix support Remote IR (IR Pass-through) from far away rooms?
A: No, but it is operated with an included remote control.
Q: Are the HDMI cards on the WolfPackLite chassis all the same and can be interchanged within an 8x8, 16x16 and 32x32 chassis?
A: Yes.
Q: We have a 24/7 operation and want to do our own field repair and maintenance, do you have a field repair kit?
A: Yes, it contains the control board, LAN card, power supply, LCD screen, LCD board and all the component to repair the matrix in the field. It doesn't include the metal chassis, nor HDMI cards as you can buy the cards at our site. Call us at 800-841-9238 for details.
Q: Do you have HDBaseT cards and receivers for the matrix?
A: No, we only have 4K/30 HDMI input and 4K/30 HDMI output cards. See the above optional standalone POE 4K/30 HDBaseT extenders which have a Transmitter and a Receiver and one AC adapter. If you need that kind of a matrix see our WolfPack Modular HDMI Matrix Routers w/iPad & Android App.
Q: Do you have a WEB GUI or iOS App for the matrix?
A: No, you use the Front Buttons, Remote control & RS232 to the Control Ins & Outs. If you need that kind of a matrix see our WolfPack Modular HDMI Matrix Routers w/iPad & Android App.
Q: I see a LAN port on the matrix, can that be used?
A: No. The LAN port is in a beta stage and does not work. Do not buy the matrix if you want to operate it on your LAN. Use the Front Buttons, Remote control & RS232 to the Control Ins & Outs. If you need that kind of a matrix see our WolfPack Modular HDMI Matrix Routers with LAN control.
Q: What is the IR frequency?
A: 38KHz