This AVPro Edge AC-MX-44HDBT HDMI/HDBaseT matrix switch The AC-MX-44HDBT is a true 4x4 HDMI/HDBaseT matrix switch. This unit includes 4 HDMI inputs and 4 HDMI/HDBaseT output blocks. These output blocks include an HDBaseT and HDMI port, these ports are mirrored, and both are active. This Matrix supports HDMI 2.0(a/b), HDCP 2.2, up to 4K video resolution, and up to 18 Gbps bandwidth. We can pass 18Gbps through category cable by using the new HDBaseT technology we have developed called "ICT", learn more about ICT below.

This switch allows any source (Blu-ray, UHD Blu-ray, satellite receiver, game consoles, PCs, to be shown on any of the connected displays. This matrix equalizes and amplifies the output to ensure the HDMI signal can be transmitted through long HDMI cables without loss of quality. Audio Delay is “On-Board” so you can manage lip-sync issue before it is a problem. Also, with built-in Scalers you don't have to forfeit that 4K signal just because you have a couple of older displays. All that with Full EDID management allows maximum flexibility with today's wide mixture of sources and displays.

AVPro Edge AC-MX-44HDBT HDMI/HDBaseT matrix switch Features:

HDMI 2.0(a/b)
18Gbps Uncompressed Bandwidth Support on HDMI
18Gbps with ICT on HDBaseT outputs
4K60 4:4:4 Support
Full HDR Support (HDR 10 & 12 Bit)
Dolby Vision, HDR10+ and HLG Support
HDCP 2.2 (and all earlier versions supported)
1080p > 4K Upscaling on HDMI outputs
4K > 1080P Downscaling on HDBaseT outputs
Advanced EDID Management
IR, RS-232 and LAN Control Options
Digital Toslink Out (7CH PCM, DD, DTS)
Balanced Analog Out (2CH PCM)
Audio Delay for Digital & Analog Out
HDBaseT Compatibility mode for mixed systems
Driver Support for Crestron, C4, RTI, ELAN and more
Extracted Audio Now Supports DD+, DTS Master Audio on Toslink
Extracted Audio Now Has 3 Operating Modes. Bound to Input, Bound to Output, or Independent Matrix
Built-in Test Pattern on Each Output to Verify Infrastructure