This Av Pro Edge AC-MXNET-1G-D-SEA Weatherproof Treated MXNet 1G Decoder protecting delicate electronics with Sealoc's nano-coating solution creates a virtually invisible, durable, waterproofing protective layer that works primarily with AVPro Edge's own computer boards and components. The nano-coating creates a formidable barrier on circuitry that encapsulates the electronic components, protecting against water, moisture, humidity, dust, salt-air, and corrosion of various types.
AVPro Edge MXNet Decoder gets the full waterproof treatment from Sealoc
The team at Sealoc does more than coat our extenders and decoders with their magic liquid. They also ensured the chassis were sealed correctly with extensive testing:
- Testing overarching effectiveness of Sealoc's Nano Fluid Treatment.
- Testing on the Receiver units was done as hybrid applications meaning outdoor, covered, and in full direct rain situations.
- Testing for environments with heat, humidity, salt fog, rainfall, and more.
- Rated IP68
The rainfall testing had the most significant impact on the functionality of the units. All control units failed immediately when the water was turned on.
A significant portion of protection is a coating made from a nanofluid developed explicitly for electronic boards by Sealoc. Ensure you have the tools to extend the life of installations in harsher conditions.
Av Pro Edge AC-MXNET-1G-D-SEA Weatherproof Treated MXNet 1G Decoder Features:
- 1G Maximum Data Rate
- Uses any standard category cable (CAT 5E or better )
- SFP Fiber Connection for Long Runs
- Built-In “Data Window” OLED display
- USB/KVM device support
- Full Exterior Light Control (for discreet installs)
- RS-232 and IR Direct Routing end point
- Encapsulated RS-232 over IP serial passthrough
Why not buy this Av Pro Edge AC-MXNET-1G-D-SEA Weatherproof Treated MXNet 1G Decoder today?
Av Pro Edge AC-MXNET-1G-D-SEA Weatherproof Treated MXNet 1G Decoder Specifications:
- Signal Type: DVI 1.0, HDMI 2.0b
- Video Resolution: 4K@60Hz 4:4:4*, 4K@30Hz 4:4:4, 4K@60Hz 4:2:0
- HDR Format: HDR 10, HLG, DV@30Hz
- CHroma Subsampling: 444, 422, 420
- Bit Depth per Color: 1080P (16Bit), 4k (10, 12 Bit)
- Audio Format: PCM 2, 5.1, 7.1 Channel, Dolby Digital 5.1 Channel, Dolby Digital Plus, DTS 5.1 Channel, DTS–ES, DTS–HD High Resolution
- Embedde Audio: N/A
- De-Embedded Audio: Stereo Analog Audio
- Ethernet: (1) × female RJ-45, PoE
- SFP: (1) × SFP Slot
- HDMI: (1) × HDMI Type A 19-pin, female, one HDMI output
- Audio: (1) × 3.5 mm mini stereo jack, Audio out
- IR: "(3) × 3.5mm mini-stereo jack, one IR-Pass,one IR-EYE, one IR-out"
- RS232: (1) × 5 Pin Terminal Block
- USB
- (2) × USB 2.0 Type-A for USB extension and KVM,
- (1) × USB Micro Type-B for MXNET service"
- Ethernet: 100 Meters/ 330 Feet over CAT5e and above
- SFP and Fiber
- 1000BASE-SX SFP Transceiver Module (MMF, 850nm, 550m, LC, DOM)"
- 1000BASE-LX/LH SFP 1310nm 10km Transceiver Module
- Operating Temperature: 23 to 125°F (-5 to 51°C)
- Storage Temperature: -4 to 140°F (-20 to 60°C)
- Operating Humidity: 5-90% RH (No Condensation)
- Max Power Consumption: 9W
- PoE (Power over Ethernet): IEEE 802.3af (15.4W)
- Power Supply Unit
- Input: AC 120-240V-50/60Hz 0.8A
- Output: DC 12V 2A
- Mounting: Rack and Furniture mount support
- Dimensions (Unit Only Width/Depth/Height)
- mm: 200 x 104 x 20
- inch: 7.87 x 4.09 x 0.79
- Dimensions (Packaged Width/Depth/Height)
- mm: 310 x 180 x 54
- inch: 12.2 x 7.09 x 2.13
- Weight (Unit): 1.2 LBS/0.55 KG
- Weight (Packaged): 1.7 LBS/0.77 KG
- Regulatory: CE/FCC/UL
- Product Warranty: 10 Years
Why not buy this Av Pro Edge AC-MXNET-1G-D-SEA Weatherproof Treated MXNet 1G Decoder today?
Av Pro Edge AC-MXNET-1G-D-SEA User Manual
Av Pro Edge AC-MXNET-1G-D-SEA Specifications
