This Av Pro Edge AC-EX70-444-RNE-P HDBaseT RECEIVER is made to work with AVPro Edge HDBaseT Transmitters but includes a 48V power supply.

The AC-EX70-444-RNE-P features the same HDBaseT receiver that is popularly paired with AVPro Edge HDBaseT 18Gbps ICT matrix switchers but includes a DC 48V power supply for stand-alone use, such as with AVPro Edge ConferX wall plates.

AVPro Edge’s world-class engineers are never content with past accomplishments…status quo is not in their DNA. AVPro Edge was first to demonstrate a 17.82Gbps, UHD 4K60 4:4:4 video signal could transit twisted pair copper artifact-free, while retaining deep color dynamics with assorted HDR metadata. Talking with us at Industry tradeshows, you asked for more distance – was it possible? Our engineering staff answered, pushing the envelope for the AC-EX70-444-RNE-P to 70 meters distance with 4K60 444 HDR, and 1080p@100 meters, as ICT flawlessly maintained perfect-to-the-pixel, high bandwidth, top-tier image fidelity.

Av Pro Edge AC-EX70-444-RNE-P HDBaseT RECEIVER Features:

HDMI 2.0(a/b)
18Gbps Bandwidth Support (Using ICT)
Ultra Slim (.47 inch/12mm)
Up to 4K60 4:4:4 Support
Full HDR Support (HDR 10 & 12 Bit)
HDR, HDR10+ and HLG Support
4K & HD Test Patterns built in for troubleshooting
L/R Audio Extraction
HDCP 2.2 (and all earlier versions supported)
CEC Pass Through
3D Support
100M (330ft) on 1080P (Cat6a)
Up to 70m (230ft) on 4K (up to 4K60 4:4:4, HDR) (Cat6a)
Bi-directional 48v PoH (Power Over HDBaseT, only one Power Supply Needed)
3-20v protection circuit built in for safe IR transport
Bi Directional IR & RS232 Transport
LED Status, Link, Power indication lights
Use single UTP/STP LAN cable (CAT-5E/6A) with substitute HDMI cable to achieve long distance transmission.
Supports uncompressed PCM 2- Ch., LPCM 5.1 & 7.1, Dolby Digital, DTS, Dolby TrueHD, DTS HD-Master Audio, Atmos
ESD protection circuitry (Inputs & Outputs) to 7KV
Can Cascade

Why not buy this Av Pro Edge AC-EX70-444-RNE-P HDBaseT RECEIVER today?

Av Pro Edge AC-EX70-444-RNE-P HDBaseT RECEIVER Specifications:

Video Resolutions: Up to 4K 60Hz 4:4:4
VESA Resolutions: Up to DCI 4K (4096x2160)
HDR Formats/Resolutions: 420, 422, 444 (10 and 12 Deep Color) HDR10, HDR10+, HLG
Color Space: YUV (Component), RGB (CSC: Rec. 601, Rec. 709, BT2020, DCI, P3 D6500)
Chroma Subsampeling: 4:4:4, 4:2:2, 4:2:0 Supported
Deep Color: Up to 16 bit (1080), Up to 12 bit (4K)
Audio Formats Supported HDMI: PCM 2.0 Ch, LPCM 5.1 & 7.1, Dolby Digtal, DTS 5.1, Dolby Digital Plus, Dolby TrueHD, DTS-HD Master Audio, DTS-X, Dolby Atmos
Audio Formats Supported Extracted (2CH Port): PCM 2 CH (No Downmix)
HDBaseT (CAT) Distance (4K): 70M (230 Feet)
HDBaseT (CAT) Distance (Full HD): 100M (330 Feet)
HDMI Lead Out (up to 4K60 4:4:4): Up to 50 Feet (using Bullet Train HDMI)
HDMI Lead Out (w/ AOC Cable) (up to 4K60 4:4:4): Up to 130 Feet (using Bullet Train AOC)
Bandwidth: 18 Gbps (w/ ICT)
HDCP: HDCP 2.2 and earlier
HDMI: Type A
Audio (Extracted Analog): 3 pin terminal block (unbalanced) each
IR Rx: 3.5mm Stereo (3 Conductor) each
RS232: 3 pin terminal block each
Power: 2 pin terminal block each
Operating Temprature: 23 to 125°F (-5 to 51°C)
Storage Temperature: -4 to 140°F (-20 to 60°C)
Humidity Range: 5-90% RH (No Condensation)
Power Consumption (Total): 9 Watts Max Pair
Power Supply
- Input: AC 100-240V ~ 50/60Hz
- Output: DC 48V .5A (Wall Version)
Dimensions
- mm: 132 x 100 x 18
- inch: 5.19 x 3.94 x .69
Dimensions (Packaged Length/Width/Height)
- mm: 137 x 194 x 45
- inch: 5.38 x 7.62 x 1.75
Weight (Unit): .5lbs (.23Kg)
Weight (Packaged): 1lbs (.45Kg)