The PIP HDMI Switch allows you to simultaneously display real-time HDMI/DVI video from two different sources on a single monitor. It is capable of displaying the video sources in dual, PiP or full screen mode. Note: this PIP HDMI Switch does not support HDCP.
PIP HDMI Switch Dual mode:
In dual mode, the screen is split into two fields of equal size displaying the entire contents of two different video sources.
The original image can be stretched or retain its aspect ratio.
Fluid, real-time video performance with 60 frames per second (fps).
PIP HDMI Switch Full Screen Mode
In full screen mode, one of the two video sources is displayed in full screen size and maximum resolution.
PIP HDMI Switch Picture in Picture (PIP) Mode
In PIP mode, the full screen display of one of the two video sources is accompanied by one small image (thumbnail) of the other video source on one corner of the screen, allowing simultaneous monitoring.
The location of the thumbnail image can be chosen by selecting the "position" button.
The size of thumbnail image is selectable.
If there is no video source connected to the thumbnail, its screen will remain black.
Note: this PIP HDMI Switch does not support HDCP.
PIP HDMI Switch Features:
Dual, Picture in Picture, and Full Screen display modes.
Inputs: HTDV resolutions to 1080p and computer resolutions to 1920x1200.
Output: 1080p, 1080i, 720p, 1024x768, 1360x768.
Independent video in to video out resolution.
HDMI features supported:
Inputs: 24-, 30-, and 36-bit xvYCC, sRGB, and YCbCr.
Outputs: 24- and 30-bit sRGB.
Two-channel non-mixing stereo with PCM2, 5.1, 7.1 channels, Dolby 5.1, and DTS 5.1 audio.
Bandwidth up to 225 MHz (6.75 Gbps).
Inputs: 2.25 Gbps
Output: 2.0625 Gbps
Fluid real-time video performance with 60 frames per second (fps).
Switch audio independently of video from connected HDMI sources in Dual mode.
Any DVI source or display can be connected by using the DVI-HD-xx-MM cable (not included).
Use DVIA-HD-CNVTR-LC or DVI-HD-CNVTR DVI + Audio to HDMI Converters to pass and independently switch audio signals to the multiviewer.
Use the front panel buttons to locally change ports, select a display mode, or change resolutions.
Built-in default EDID table.
Note: this device does not support HDCP.
Why not buy this PIP HDMI Switch today?
PIP HDMI Switch Inputs:
Two female HDMI connectors.
Supports digital HDMI devices, such as DVD/Blu-ray players, satellite receivers, and HDTV tuners.
A DVI source can be connected by using the DVI to HDMI cable (not included). The cable does not pass audio to the PIP HDMI Switch.
Use a video + audio to HDMI video converter to pass embedded HDMI audio into the PIP HDMI Switch.