The WP-220 is a line driver for computer graphics video with resolutions from VGA through UXGA and higher and composite video, each with stereo audio signals. It provides controls to compensate for signal losses inherent in long cable runs.NOTE: This product has been discontinued. See the above SIMILAR Tab for equivalent products or, if not there, call us at 800-841-9238 right now to discuss your needs.
Kramer WP-220 Computer Graphics & Video Line Amplifier with Audio & Wall Plate Features:
- High Bandwidth - 500MHz (-3dB) for 15-pin HD and 490MHz (-3db) for composite video.
- HDTV Compatible
- Advanced Sync Processing - Ensures compatibility with a wide range of computers.
- Front Panel Connections - 15-pin HD (PC) with 3.5mm stereo Audio and RCA for composite video with 2 RCAs for stereo Audio inputs.
- Rear Panel Connections - 5 BNCs for the computer graphics signals, terminal blocks for the composite video signal, and Balanced stereo terminal blocks for each stereo Audio signal.
- Level (Gain) and EQ (Peaking) Controls.
- Audio Level Controls - Left & Right for stereo Audio on 2 RCAs
- Wall Plate Size - Single gang.
Why not buy this Kramer WP-220 Computer Graphics & Video Line Amplifier with Audio & Wall Plate today?
Kramer WP-220 Computer Graphics & Video Line Amplifier with Audio & Wall Plate Specifications:
- INPUTS: VIDEO: 1 XGA analog red, green, blue signals: 0.7 Vpp/75 ohm, H and V sync, TTL level, on an HD15F connector; 1 composite video 1 Vpp/75 ohm on an RCA connector; AUDIO: 1 PC unbalanced stereo audio on a 3.5mm mini jack; 1 unbalanced stereo line audio on RCA connectors
- OUTPUTS: VIDEO: 1 RGBHV on 5 BNC connectors 0.7 Vpp/75 ohm, RGB TTL level syncs 1 composite video 1 Vpp/75 ohm on 2 Pins
- MAX. OUTPUT LEVEL: VIDEO: 2Vpp; AUDIO: 7Vpp
- BANDWIDTH (-3dB): VIDEO: XGA: 500MHz, Fully Loaded; CV: 490MHz, Fully Loaded; AUDIO: >100kHz
- DIFF. GAIN: XGA: 0.07%; CV: 0.05%
- DIFF. PHASE: XGA: 0.04 Deg.; CV: 0.05 Deg.
- K-FACTOR: XGA: 0.1%; CV: <0.05%
- S/N RATIO: XGA: 75.1dB; CV: 76.7dB; AUDIO: 76.84dB
- CROSSTALK (all hostile): VIDEO: XGA: 63.6dB; CV: 64.5dB; AUDIO: -91dB
- CONTROLS: VIDEO: XGA EQ.: 0dB to +4.5dB @ 50MHz; CV Level: -1.2dB to +6dB; CV EQ.: 0dB to +1.4dB @ 4.43MHz; AUDIO: Line level: -70dB to +6.2dB
- COUPLING: VIDEO: XGA / CV: DC; AUDIO: AC at input; DC at output
- AUDIO THD + NOISE: 0.028%
- AUDIO 2nd HARMONIC: 0.012%
- POWER SOURCE: 12 VDC, 145mA
- DIMENSIONS: 6.9cm x 5.0cm x 11.4cm (2.72" x 1.97" x 4.49", W, D, H)
- WEIGHT: 0.3 kg (0.67 lbs.) approx
- ACCESSORIES: Power supply
- Weight: 1 lbs.
Click Here for Product Warranty
Questions & Answers
Ask a question about the Kramer WP-220 Computer Graphics & Video Line Amplifier with Audio & Wall Plate or Call 800-841-9238