WACI NX Jr expanded to 21 ports. | |
WACI NX Jr expanded to 21 ports. |
WACI NX Jr E1
The WACI NX Jr E1 is WACI NX Controller with 7 Serial Ports, 4 Relays, 6 IR/RS232TX Ports, and 4 DSP i/o ports.
The specific control requirements of a system design determine the correct WACI NX configuration. Designers simply tally the control ports needed, then combinations of serial, relay, I/O and IR ports can be assembled to provide total control of all aspects of a centrally located system. Designers may contact Aurora for a system review and recommendations. Rapid field installation of expansion ports requires a technician to simply; check that the WACI Firmware version is 3.5, plug in the module, and tighten 4 screws. All of the added ports become available immediately.
NOTE: This product has been discontinued. See the above SIMILAR Tab for equivalent products or, if not there, call us at 800-841-9238 right now to discuss your needs.WACI NX Jr E1 Features:
- WACI can support the simplicity of the most powerful universal IR remote in the world, or it can be the heart of a complex, networked, worldwide asset management and control system.
- No other control system on the market offers this combination of features in a compact, cost effective package.
- Greater expandability offers more flexibility (including secure wireless connectivity).
- Each WACI unit contains its own resources preventing slow performance and bottlenecks cause by shared systems.
- Integrates with the entire WACI control system series (including the WACI NX expansion bus add-on packs and IPF network expansion modules).
- The WACI NX expansion bus allows hard disk storage, battery backup features, streaming audio/video, and additional ports.
- True platform-independent operation ? a wide range of OS compatibility (including with multiple OS simultaneous access across a common network).
- Programming is as easy as writing web pages with off-the-shelf content creation applications such as Macromedia Flash?, HTML, DHTML, SOAP, XML, CGI, RPC, and Visual Basic?
- Compatible with Microsoft? Internet Explorer 5.0 or higher, Netscape Navigator?, Mozilla Firefox?, and Apple? Safari? web browsers.
- Pre-configure and test equipment, control or monitor connectivity using the built-in diagnostics and advanced event manager before writing any code.
- Server side operation means that no dedicated server is required and that no special applications need to be installed on your PC to access the WACI control system. Built-in network security features (including encryption and password protected multiple access levels with intelligent remote telnet capabilities).
WACI NX Jr E1 Specifications:
- Size: 5.80 x 4.90 x 1.90 inches
- Hardware
- Two 10/100T LAN Ports with Auto MDX and Auto Polarity
- One IR Input Port
- 6 IR/1-way RS-232 ports
- 4 DSP ports ? TTL In/Out and analog inputs and outputs -5v to + 5v
- 4 isolated low-voltage relays C-Type 24VDC @1A
- 7 bidirectional serial ports
- One IR Learner
- One High-speed, 2.1Gb/s card slot
- One USB On-the-Go Port
- One compact flash Type II slot for memory and/or 802.11b/g
- OLED Display with 6 buttons
- 15W 12v Power Supply
- It also has an internal web server with built-in event manager
Why not buy this WACI NX Jr E1 today?
WACI NX Jr expanded to 21 ports.
Recently Viewed Items