The KRAMER VM-1015 is a full broadcast, state-of-the-art 1x5 Video Distribution Amplifier designed for studio and other demanding applications. The VM-1015 splits a single input source into five identical outputs with no discernible signal degradation. Output signals can either be AC or DC coupled, black level or sync tip clamped, allowing the machine to function in all video environments.NOTE: This product has been discontinued. See the above SIMILAR Tab for equivalent products or, if not there, call us at 800-841-9238 right now to discuss your needs.
The machine may be used to distribute analog or SDI (Serial Digital) video signals, composite or single component. Video bandwidth of well over 340 MHz and superb specifications make the VM-1015 the ultimate distributor for all video applications.
The Kramer VM-1015 is a high performance distribution amplifier for composite or SDI video signals. It provides controls to compensate for signal losses inherent in long cable runs.
Kramer VM-1015 1x5 Video Only Distribution Amplifier Features:
- High Bandwidth - 340MHz (- 3dB).
- Level (Gain) and EQ (Peaking) Controls.
- Looping Input.
- Selectable Input Signal Termination.
- Video AC/DC Coupling Selection.
- Clamping - Black or Sync Tip Selectable.
- Standard 19 Rack Mount Size - 1U.
Why not buy this Kramer VM-1015 1x5 Video Only Distribution Amplifier today?
Kramer VM-1015 1x5 Video Only Distribution Amplifier Specifications:
- INPUTS: 1 Video-Composite or single Component, looping, 1Vp-p/75 Ohm on BNCs with termination switch
- OUTPUTS: 5 Composite /Component Video, 1 Vp-p/75 Ohm on BNCs
- VIDEO BANDWIDTH: 340 MHz -3dB
- VIDEO S/N RATIO: Better than 75 dB
- COUPLING: AC, DC, and Clamped - user selectable with one of four front panel switches
- DC CLAMP: 0 VDC Black Level, or sync bottom TIP
- NON-LINEARITY: <0.1 Percent
- DIFF. GAIN: 0.08 Percent
- DIFF. PHASE: 0.12 Deg.
- K-FACTOR: <0.03 Percent
- GAIN CONTROL: -1.2dB to +2.8dB (through a trimmer on the front panel)
- EQ. CONTROL: 0 to 2.7dB @ 100% color bar, 4.43MHz
- POWER SOURCE: 230VAC 50/60 Hz (115V U.S.A.)
- DIMENSIONS: 19 inch, 1U rack mountable
- WEIGHT: 2.5 kg, (5.5 lbs.) approx.
- ACCESSORIES: Power cable.
- Weight: 6 lbs.
Click Here for Product Warranty
Questions & Answers
Ask a question about the Kramer VM-1015 1x5 Video Only Distribution Amplifier or Call 800-841-9238