Kramer VM-1010 Configurable 1x10 / Dual 1x5 Video DA
The Kramer VM-1010 Configurable 1x10 / Dual 1x5 Video DA is a high performance distribution amplifier for composite video signals on BNC connectors. Using a simple front panel switch, it can be configured either as a single 1x10 DA, or as two separate 1x5s. In either mode its purpose is to provide identical outputs to drive multiple monitors, projectors or other receiving devices. The looping connectors located adjacent to each input may be used as an additional output in some cases, and can make it easy to create larger systems. Rear panel switches allow the user to select DC or AC output coupling for maximum flexibility.
The VM-1010 is housed in a rugged, professional rack mountable enclosure with an internal power supply allowing the use of a standard, detachable power cord Technical Specifications: Inputs: Two Component or Composite, 1Vpp/75 Ohms on BNC Outputs: Two times five Component or Composite Video, 1Vpp/75 Ohms on BNC Coupling: DC or AC, with input protection circuitry, +/-30mV offset Bandwidth: Exceeding 100MHz Non Linearity: Less than 0.2% S/N Ratio: Better than 70 dB Dimensions: 19", 1RU.
NOTE: This product has been discontinued. See the above SIMILAR Tab for equivalent products or, if not there, call us at 800-841-9238 right now to discuss your needs.
The VM-1010 is high performance distribution amplifier for composite
video. It can be configured as a 1:5 distribution amplifier for s-Video
(Y/C) signals and has controls to compensate for signal losses inherent in
long cable runs.
Kramer VM-1010 Configurable 1x10 / Dual 1x5 Video DA Features:
High Bandwidth - 235MHz (- 3dB).
Dual-Mode: Configure as either a 1:10 (Composite) or 1:5 s-Video) DA.
Grouped Level (Gain) and EQ (Peaking) Controls.
Video AC/DC Coupling Selection.
Selectable Input Signal Termination.
Standard 19 Rack Mount Size - 1U.
Why not buy this Kramer VM-1010 Configurable 1x10 / Dual 1x5 Video DA today?
Kramer VM-1010 Configurable 1x10 / Dual 1x5 Video DA Specifications:
INPUTS: 2 composite/component video, looping, 1Vpp/75 on BNC connectors with termination switch.
OUTPUTS: 2 x 5 composite/component video, 1 Vpp/75 on BNC connectors.
MAX. VIDEO OUTPUT: 1.8 Vpp.
VIDEO BANDWIDTH (-3DB): 235 MHz.
DIFF. GAIN: 0.2 %.
DIFF. PHASE: 0.04 Deg.
VIDEO S/N RATIO: 77dB.
NON LINEARITY: 0.2%.
CONTROL: Level front trimmers: -1.4dB/+2.5dB, EQ. trimmers:
0/+2.5dB @ 4.4MHz.
COUPLING: DC or AC (user selectable).
POWER SOURCE: 230VAC 50/60 Hz (115V U.S.A.), 10.3 VA.