tvONE 2320017-01 2-Port Fiber Optic Extender (Receiver) With Scaling HdmitvONE 2320017-01 2-Port Fiber Optic Extender (Receiver) With Scaling Hdmi is available in two-port (VG-RX2-MM-HDMI-ISA) and four- port (VG-RX4-MM-HDMI-ISA) iterations, and accept video, audio and two-way serial from any Voyager transmitter (HDMI, DVI, VGA or component). HDCP-protected video is supported and these receivers are rated for 1920x1200 uncompressed video signals, to distances of 6,600 feet over multimode fiber.
One multimode fiber-optic module is included with each unit. Additional modules can be ordered to daisy-chain Voyager receivers (increasing distribution options). Up to 10 (or more, depending on distance and the specific type of fiber being used) Voyager receivers can ultimately be daisy-chained together.
The unit's ISA module also allows analog audio to be received. The analog audio can also be embedded with video and outputted via a single HDMI connector. Conversely, embedded HDMI audio can also be de-embedded and broken out separately, via the analog audio output on the receiver.
The new Voyager HDMI-SRx module can be used with both two and four-port cores. This module takes video from any Voyager transmitter and outputs one of 29 different stored video resolutions. A 30th resolution can be custom configured by the user. When operating in its default mode, and connected with a display, the SRx scaling receiver will automatically read EDID information and configure itself in order to output the screen's preferred resolution.
Singlemode fiber optic modules supporting longer distances (4KM and 30KM) are also available from Magenta.A power supply is included.
- Singlemode or multimode fiber
- SRx-HDMI (optional) module scales video to one of 30 different resolutions
- Two-port (VG-RX2) and four-port (VG- RX4) functionality
- Uncompressed multi-format video at 1920x1200
- Multi-format audio & RS-232
- Daisy-chain capability with full bidirectional signal support
- Advanced EDID management and HDCP compliance
- Host of audio options for de-embedding HDMI audio or embedding analog audio into the HDMI stream
Why not buy this tvONE 2320017-01 2-Port Fiber Optic Extender (Receiver) With Scaling Hdmi today?
tvONE 2320017-01 2-Port Fiber Optic Extender (Receiver) With Scaling Hdmi
|DC input power||Provided by the CORE module. However, power consumption of this module alone is approximately 0.5 watts.|
|Video Support||Video output formats: • Maximum resolution supported = 1080p or 1920x1200. • Maximum color-depth = 24 bits per pixel (8 bits per color). • Maximum refresh rate = 60Hz at 1920x1200.|
|Audio Characteristics||This module automatically provides embedded HDMI-audio (if audio is available at the source AND if the EDID in the sink or display device supports it). * For analog-audio output, please use the ISA auxiliary module.|
|Connectors||(1) HDMI-output, (1) CORE docking connector|
|EDID/DDC||This module supports the EDID/DDC connections on the HDMI connector.|
|HDCP||Version 1.1. Classification: HDCP Repeater Device|
|CEC||The HDMI "CEC" interface protocol is not currently supported. Note: The hardware is capable. A future firmware upgrade may enable this functionality.|
|Environmental||Operating temperature: 32 to 104˚F (0 to 40˚C). Storage temperature: -4 to +140˚F (-20 to +60˚C). Humidity: 80% RH, non- condensing.|
|Enclosure||Steel (0.040"/1mm thick). Powder-coat black paint, white epoxy graphics.|
RS232 standard serial interface. Reflects DCE pinout standard. Signals: TXD, RXD, RTS, CTS, DSR, DTR, DCD and RI. Speeds: 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400 Baud. Format: 8 data. 1 or 2 stop bits. no parity bit. Flow control: Hardware and software flow-control is available, configurable on/off. t Connector: DB9-Female, w/4-40 standoffs. Note: Speed and data format are software-configurable via MAGui. The ISA hardware is capable hardware and software (Xon/Xoff) handshaking. However, this capability is not yet enabled by the firmware. Check with Magenta Research for applicable firmware updates.
Discrete Left and Right line-level audio. This module can function as an input (for TX) or output (for RX) device. The audio signal direction is under software control, and is selected automatically by the type of CORE module being used. Audio-input mode (when used with VG-TX2 CORE): Input voltage: 2V peak-to-peak, maximum. Input impedance: >= 10K ohms. Input coupling: AC (capacitive). Input sample rate: 48KHz Input frequency response: 20-20KHz, (at -3dB). Audio-output mode (when used with VG-RX CORE): Output voltage: 2V peak-to-peak, maximum. Output impedance: <= 100 ohms. Output coupling: AC (capacitive). Output sample rate: 48KHz Output frequency response: 20-20KHz, (at -3dB). Connector: 3.5mm (1/8") stereo-phono type jack.
|System Size||Assumes a typical 3-module configuration consisting of: VIDEO + CORE + ISA modules, docked together: 1.75"(4.45cm)H x 7.75"(19.68cm)W x 5.25"(13.33cm)D Weight: 2.2lbs (.635kg)|
Questions & Answers
Ask a question about the tvONE 2320017-01 4-Port Extender (Receiver) With Hdmi (Hdcp)/Audio/Rs-232/Two Mmf Sfp or Call 800-841-9238