The TP-6 is a high performance twisted pair line amplifier designed to extend the cable length of any of the TP series transmitters / receivers to almost any desired distance. The TP-6 comes with a 12VDC power supply for typical operation, but can receive power from the twisted pair wire (in a 4-wire setup). Also, due to its very small power consumption, several units may be cascaded and powered from one standard 12V DC supply. Any number of TP-6 units may be used in cascade operation. Rear panel controls allow the video gain and high frequency EQ to be optimized for best performance. It is housed in a compact enclosure but can be rack mounted using the RK-SM kit which holds three units in two vertical spaces of a standard 19" rack. Technical Specifications: INPUT: Balanced, 150 Ohms on 6/4 standard telephone socket NON LINEARITY: Less than 1% at 100 meters OUTPUT: Balanced, 150 Ohms on 6/4 standard telephone socket POWER SOURCE: 12 VDC 30 mA. BANDWIDTH: 12 MHz. -3dB at 100 meters, 4 MHz -3dB at 600 meters DIMENSIONS: 11.7cm X 6cm X 3.2cm (W, D, H.) COMPENSATION: Gain and HF above 2.5MHz 0/+ 6dB, rear panel accessible SYSTEM DELAY: 1 microsecond TYP. at 100MNOTE: This product has been discontinued. See the above SIMILAR Tab for equivalent products or, if not there, call us at 800-841-9238 right now to discuss your needs.
Kramer TP-6 Twisted Pair Line Amplifier Specifications:
- Weight: 1 lbs.
Why not buy this Kramer TP-6 Twisted Pair Line Amplifier today?
Questions & Answers
Ask a question about the Kramer TP-6 Twisted Pair Line Amplifier or Call 800-841-9238