SB-5430 - 4x2 Composite/S-Video/Audio Routing Switcher
switches 4 inputs to two outputs. This four (4) in two (2) out Composite/S-Video/Audio Video Selector works as a switcher for multiple Audio/Video sources and displays. It is capable of switching Composite, S-Video and Stereo Audio signals between four (4) sources and two (2) displays (same signal on both outputs) with compatible inputs. It supports a maximum bandwidth of 100MHz with sharp and highly defined video for multiple resolutions of up to 480i/576i.
Shinybow SB-5430 4x2 Composite/S-Video/Audio Routing Switcher Features:
- 4 Inputs:Composite/S-Video/Audio (RCA)
- 2 Outputs:Composite/S-Video/Audio (RCA)
- IR and Manu double select
- Video Bandwidth 100Mhz
- Video Distortion < 1.2db
- Audio Distortion < 0.6db
- Channel Isolation > 50db
- S/N Ratio > 50db
- Use IR Remote Controler (Frequency 38KHz).
- Lower Power Consumed 12VDC,@300~500mA.
Note that the SB-5430 is not a signal converter. If the input signal is Composite, the output is Composite. If the input is S-video, the output is S-Video. You cannot input Composite Video and expect that signal on the S-Video output.
Being a Video Selector Switcher, it allows any input to be routed to both outputs simultaneously. This Video Selector Switch eliminates the need to constantly move around video input and output cables. The 4x2 Routing Switcher works with all Audio/Video equipment that has proper connections: such as Cable and Satellite receivers, Computers, Video Scalers, DVD players, VCR's, etc.
For a true 4x2 Matrix Routing switcher where the outputs are independent, see our SB-5450.
Why not buy this Shinybow SB-5430 4x2 Composite/S-Video/Audio Routing Switcher today?