The OMX-4x4 Switchers are flawlessly designed 4 x 4 matrix routers for seamless routing between any one of four inputs to any or all of the four outputs. Since audio-follows-video, each switch selected controls both video and audio. As a true matrix switcher, you may send any input signal to any output. Vertical Interval Switching provides glitch free transitions between synchronized sources.
NOTE: This product has been discontinued. See the above SIMILAR Tab for equivalent products or, if not there, call us at 800-841-9238 right now to discuss your needs.
The 4x4 models are controlled from the front panel using "output" assignment switches with LED confirm. Additionally, a 9-Pin Serial Control Port Located on the rear panel is provided to interface your PC with the switcher. Included Software is provided for switcher control from any standard PC.
Bandwidth: 30MHz Unity gain
Differential phase: 0.05 Degrees
Differential Gain: 1.01% - Measured with a 40 IRE 3.58MHz Sine wave over a linear ramp 0-100 IRE
DC Offset: 0V at 1Vp-p into 75 Ohms
YC Delay: Better than 10nS
Adjacent Channel Crosstalk: -65dB: Measured by 10MHz 4Vp-p Sine wave into 75 Ohms