null

NTI ST-IPHD-L-2GOPOE HDMI Over Gigabit IP Extender

$695.00
Part Number:
ST-IPHD-L-2GOPOE
UPC:
796168576449
Availability:
Usually ships the same business day
1:
Supports HDTV resolutions to 1080p
2:
Ideal solution for digital signage applications
3:
Transmits an HDMI signal over one CAT5e/6/7 cable
4:
Free 15-Day Trial (See below FAQ)
5:
Free Shipping & 2-Year NTI Warranty
6:
Add'l Discounts to .GOV & .MIL & .EDU & .ORG

NTI ST-IPHD-L-2GOPOE HDMI Over Gigabit IP Extender with Power over Ethernet (POE)

NTI ST-IPHD-L-2GOPOE HDMI Over Gigabit IP Extender with Power over Ethernet (POE) multicasts digital video and audio signals to one or more receivers up to 333 feet away over a 1000BASE-T Gigabit Network connected with CAT5e/6/7 cable.

Each HDMI Over Gigabit IP Extender consists of a local unit that connects to an HDMI source, and a remote unit that connects to an HDMI display. The local and remote units can be connected together for a Point-to-Point connection via CATx cable or a Point-to-Many connection via a network switch. Support for multiple transmitters requires a managed network switch.

NTI ST-IPHD-L-2GOPOE HDMI Over Gigabit IP Extender with Power over Ethernet (POE) Features:

  • Supports HDTV resolutions to 1080p.
  • Ideal solution for digital signage applications.
  • Power over Ethernet (PoE) - power supply not required at the local or remote unit.
  • Broadcast real-time HDMI video and audio signals to multiple display locations with a managed or unmanaged (also known as non-managed) network switch.
  • Transmits an HDMI signal over one CAT5e/6/7 cable.
  • Supports video wall installations from 1x2 to 16x16 screens.
  • Plug-and-Play installation allows receivers to find the transmitter automatically on the same network. (Network configuration may be required for Managed network switch.)
  • Easily expandable. Add remote units as you add monitors.
  • Built-in scaler - watch compatible sources at 1080p.
  • Supports 2-way RS232 commands (control software on a PC, or other automated control system hardware such as Control4 or Crestron) to control any devices attached to the matrix using RS232.
  • Integrated mounting brackets for easy surface/wall mounting.
  • Inexpensive CAT5e/6/7 cable replaces bulky video cables.
  • Support for multiple transmitters requires a Managed network switch with VLAN/IGMP support. Standard LAN switches can only support one transmitter.
    • Each VLAN acts as a separate HDMI Over IP Channel on the network.
    • One transmitter can connect up to 200 receivers using cascaded managed network switches.
  • Cascade managed network switches up to 3 levels, allowing the farthest display to be located up to 1,000 feet away from the source device. Each receiver can be located up to 333 feet from the managed switch.
  • For a point-to-many connection, a standalone network with an unmanaged network switch, hub, or router can be used instead of a managed network switch.
    • It is not recommended to use any other network devices on this standalone network as it may cause a degradation in performance.
  • Use a PC to access the built-in HTTP Interface of the managed network switch to control what signal is being watched at each location.
  • Use a Telnet client to access any receiver on the VLAN or network.
  • Customizable EDID table on local unit.
  • HDCP compliant.
  • Local and remote units must be in the same LAN. The units do not support WAN connections.

Why not buy this NTI ST-IPHD-L-2GOPOE HDMI Over Gigabit IP Extender with Power over Ethernet (POE) today?

NTI ST-IPHD-L-2GOPOE HDMI Over Gigabit IP Extender with Power over Ethernet (POE) Specification:

    • LAN Bandwidth: 180 to 500 Mbps
    • Protocol: IP, UDP, TCP, ICMP, and IGMP
    • Supports video wall installations from 1x2 to 16x16 screens. (See Control Methods for details.)
    Local Unit
    • One female HDMI-A port for source connection.
    • One female 1000Mbps RJ45 port for sending high definition video/audio signals and DDC signal.
    • One female 3.5mm jack for RS232.
    • Class 3 PoE compatible (10 watts maximum).
    Remote Unit
    • One female HDMI-A port for HDTV or computer display.
    • One female 1000Mbps RJ45 port for receiving high definition video/audio signals and DDC signal.
    • Signal type: HDMI, HDCP compliant.
    • Supports HDTV resolutions to 1080p and computer resolutions to 1920x1200.
    • Supports multichannel compressed audio (Dolby Digital, DTS, THX) through HDMI compatible TVs or audio receivers.
    • One female 3.5mm jack for RS232.
    • Class 3 PoE compatible (10 watts maximum).
    Power
    • Power over Ethernet: With a switch that supports Power over Ethernet, a power supply is not required at the local or remote unit.
    • Local and remote unit: 100 to 240 VAC at 50 or 60 Hz via AC adapter (not included).
      • Country-specific AC adapter sold separately (PWR-SPLY-IPHD2GO).
    Max Distance
    • 330 feet (100 meters) over CAT5e/6/7 cable.
    Cables
    • Use HD-xx-MM cable to connect an HDMI source or display (not included).
    • Use DVI-HD-xx-MM cable to connect a DVI source or display (not included).
    • Use CAT5e/6/7 UTP straight through cable for TIA/EIA-568B wiring terminated with standard RJ45 connectors (not included).
    Dimensions:
    • WxDxH (in): 4.76x4.92x1.18 (121x125x30 mm)
    Environmental:
    • Operating temperature: 32 to 140˚F (0 to 60˚C).
    Regulatory Approvals
    • CE, FCC, RoHS
    Warranty
    • Two years.
Tawk.to