MuxLab 500762-TX 1080p HDMI to H.264/H.265 over IP Transmitter w/PoE | |||
|
| ||
)
MuxLab 500762-TX 1080p HDMI to H.264/H.265 over IP Transmitter with PoE
MuxLab 500762-TX 1080p HDMI to H.264/H.265 over IP Transmitter with PoE which allows HDMI source and display equipment to be extended locally up to 330ft (100m) at up to 4K @ 60Hz resolution via Cat5e/6 cable in point-to-point, point-to-multipoint and multipoint-to-multipoint configurations via a local Ethernet network, in a low bandwidth, flexible, expandable and cost effective manner, without the need to install dedicated cabling systems.
The exceptionally low bandwidth requirements of this device combination allows for streaming audio/video content over a local network, over WiFi, and over the Internet for distributed installations spread-out throughout the globe. The transmitter accepts a 1080p @ 60Hz video and streams the content to the Receiver, where the signal is up-scaled up to 4K @ 60Hz to be displayed on a 4K monitor.
The Receiver also accepts H.264/H.265 video streams from other transmitting devices of up to 4K @ 60Hz, and supports a USB 3.0 Type A connector for storing and playback of local content from an external USB drive. These devices support PoE (PD) and may be powered by a PoE (PSE) Ethernet Switch.
MuxLab 500762-TX 1080p HDMI to H.264/H.265 over IP Transmitter with PoE which allows HDMI source and display equipment to be extended locally up to 330ft (100m) at up to 4K @ 60Hz resolution via Cat5e/6 cable in point-to-point, point-to-multipoint and multipoint-to-multipoint configurations via a local Ethernet network, in a low bandwidth, flexible, expandable and cost effective manner, without the need to install dedicated cabling systems.
The exceptionally low bandwidth requirements of this device combination allows for streaming audio/video content over a local network, over WiFi, and over the Internet for distributed installations spread-out throughout the globe. The transmitter accepts a 1080p @ 60Hz video and streams the content to the Receiver, where the signal is up-scaled up to 4K @ 60Hz to be displayed on a 4K monitor.
The Receiver also accepts H.264/H.265 video streams from other transmitting devices of up to 4K @ 60Hz, and supports a USB 3.0 Type A connector for storing and playback of local content from an external USB drive. These devices support PoE (PD) and may be powered by a PoE (PSE) Ethernet Switch.
MuxLab 500762-TX 1080p HDMI to H.264/H.265 over IP Transmitter with PoE Features:
- Receiver supports up to 4K @ 60Hz (4:4:4) video streams
- Receiver up-scales 1080p @ 60Hz video streams from Transmitter and other devices up to 4K @ 60Hz
- Transmitter supports up to 1080p @ 60Hz video
- Extends local audio/video transmission up to 330ft (100m) over Cat5e/6
- H.264/265 video codec, excellent for LAN, WiFi & Internet transmission
- High image quality and 100ms latency depending on protocol
- Supports 100's of Transmitters & Receivers depending on network bandwidth
- Supports Multicast (LAN), and RTSP / RTMP / HLS (LAN & Internet)
- USB 3.0 port for storing and playback of local content from an external USB drive (RX)
- Supports SPDIF (TosLink) Audio Out (RX)
- 2CH audio insert (TX), and 2CH audio extract (RX)
- RS232 and Directional IR for remote control of end-devices
- PoE powered, via PoE (PSE) Ethernet Switch
- Managed remotely via Pro Digital Network Controller (500811)
Why not buy this MuxLab 500762-TX 1080p HDMI to H.264/H.265 over IP Transmitter with PoE today?
MuxLab 500762-TX 1080p HDMI to H.264/H.265 over IP Transmitter w/PoE
Recently Viewed Items
