MuxLab 500752-TX HDMI over IP Extender with PoE allows HDMI equipment to be connected up to 330feet (100m) @ 1080p via one (1) Cat5e/6 unshielded twisted pair cable in a point-to-point configuration. Point-to-multipoint and multipoint-to-multipoint is possible by connecting several Transmitters and Receivers to the same Ethernet network. The Transmitter (500752-TX) and Receiver (500752-TX) also support PoE (PD) if used with a PoE (PSE) Ethernet Switch. The HDMI over IP extender kit comes with one (1) Transmitter and one (1) Receiver ideal for starting to set up your HDMI over IP network. The IR Emitter and IR Sensor, if required, may be purchased separately for remote control applications.
For the point-to-multipoint and multipoint-to-multipoint configuration the Ethernet switch must have Gigabit ports, DHCP Server capability and IGMP communications protocol. MuxLab recommends using the Cisco SG300 Series Managed Switches.
The MuxLab Pro Digital Network Controller (500811) is available to simplify the configuration and utilization of the MuxLab IP based products via an Ethernet web interface, and supports third party management via smartphone and tablet.
Applications:Commercial and residential AV systems, classroom projector systems, digital signage, boardroom systems, collaborative PC systems, and medical information systems.
Note: This device supports PoE (PD), and is intended to be powered via a PoE (PSE) Ethernet Switch. If a PoE (PSE) Ethernet Switch is unavailable, then the power supply (500992) may be purchased separately.
MuxLab 500752-TX HDMI over IP Extender with PoE Features:
Supports up to 1080p resolutions
Motion JPEG compression with Very low latency
Supports 100's of Transmitters and Receivers, depending on network bandwidth
Supports point-to-point, point-to-multipoint and multipoint-to-multipoint applications
Transmission up to 330ft (100m) over Cat5e/6
Up to 390ft (120m) between the TX and RX when no LAN switch is used
Supports IR transmission for remote control
Control via any web device (mobile, tablet) with use of model 500811 (Pro Digital Network Controller)
Why not buy this MuxLab 500752-TX HDMI over IP Extender with PoE today?
MuxLab 500752-TX HDMI over IP Extender with PoE
HDMI 1.3a, Ethernet, IGMP
1 frame; 33 ms latency at 30 fps
Point to Point: 100BaseT, Multipoint: 1000BaseT
Point-to-point, point-to-multipoint, multipoint-to-multipoint (for multipoint-to-multipoint the gigabit Ethernet switch must support the IGMP communications protocol)
1x RJ45S for Cat 5e/6 unshielded or shielded twisted pair via 10/100BaseT
1x 3.5 mm jack for IR emitter/sensor
4-digit/position DIP switch for device ID addressing
Based on a maximum length of 6.6 ft (2 m) of HDMI cable per end:
Cat 5e/6: 328 ft (100 m) up to 1080p (Gigabit Ethernet required for 1080p)
When installed in an electrically noisy environment, an STP cable must be used. Also, cross-connection reduces the effective distance depending on the grade of twisted cable used.
RJ45 Pin Configuration
Reverse polarity sensitive; use EIA/TIA 568A or 586B straight-through wiring:
Ask a question about the MuxLab 500752-TX HDMI over IP Extender with PoE or Call 833-WOLFPACK (833-965-3722)
This product may be eligible to be purchased through the United States Governments SEWP program, similar to their GSA program.
The NASA SEWP (Solutions for Enterprise-Wide Procurement) provides the latest in Information and Communications Technology (ICT) and Audio-Visual (AV) products and services for all Federal Agencies and their approved contractors.
If you are a government agency and want to see whether HDTV Supply has this product in the SEWP database go to our our SEWP Contract Holder RedHawk IT Solutions, LLC to allow you to maybe order this product from the United States Governments SEWP program. It is very easy to place your order, go to the link above and enter HDTV Supply and there you will see a list of part numbers of what we currently have. If you do not see it than give us a call at 833-WOLFPACK (833-965-3722) and we may be able to enter it.
Our SEWP Contract Holder RedHawk IT Solutions partner has the following credentials:
Their SEWP Federal Contracts are:
SEWP Contract Number: NNG15SD38B
Group: Group B_SDVOSB
SEWP Contract Number: NNG15SD88B
Group: Group C
The SEWP Program Office manages a suite of government-wide IT products and services contracts that enable NASA and all Federal Agencies to achieve their missions and strategic initiatives by providing streamlined access to critical technologies and solutions. The Program provides best value for the Federal Government and American taxpayer through innovative procurement processes, premier customer service and outreach, acquisition insight, and partnership with Government entities and Industry.
For a complete listing of HDTV Supply products from us, or our other vendors, call 833-WOLFPACK (833-965-3722).
MuxLab 500752-TX HDMI over IP Extender with PoE
Scroll Left & Right To See 20 Of Your Recently Viewed Items Below