Call 833-WOLFPACK (833-965-3722)
Customer Reviews
Home  //  MuxLab 500752-RX HDMI over IP Extender with PoE

MuxLab 500752-RX HDMI over IP Extender with PoE

MuxLab 500752-RX HDMI over IP Extender with PoE
MuxLab 500752-RX HDMI over IP Extender with PoE
MuxLab 500752-RX HDMI over IP Extender with PoE - Extra Image 1MuxLab 500752-RX HDMI over IP Extender with PoE - Extra Image 2MuxLab 500752-RX HDMI over IP Extender with PoE - Extra Image 3
MuxLab 500752-RX HDMI over IP Extender with PoE
MuxLab 500752-RX HDMI over IP Extender with PoE
MuxLab 500752-RX HDMI over IP Extender with PoE

Supports up to 1080p resolutions

Motion JPEG compression with Very low latency

Transmission up to 330ft (100m) over Cat5e/6

Free Shipping & 2-Year MuxLab Warranty

Free Lifetime Telephone, CHAT, TEXT, FAX & Email Tech Support

Part # 500752-RX
Usually ships in 1-2 weeks
Today's Price: $383.00
Ask Our WolfPack Experts

Features

MuxLab 500752-RX HDMI over IP Extender with PoE

MuxLab 500752-RX HDMI over IP Extender with PoE allows HDMI equipment to be connected up to 330feet (100m) @ 1080p via one (1) Cat5e/6 unshielded twisted pair cable in a point-to-point configuration. Point-to-multipoint and multipoint-to-multipoint is possible by connecting several Transmitters and Receivers to the same Ethernet network. The Transmitter (500752-TX) and Receiver (500752-RX) also support PoE (PD) if used with a PoE (PSE) Ethernet Switch. The HDMI over IP extender kit comes with one (1) Transmitter and one (1) Receiver ideal for starting to set up your HDMI over IP network. The IR Emitter and IR Sensor, if required, may be purchased separately for remote control applications.

For the point-to-multipoint and multipoint-to-multipoint configuration the Ethernet switch must have Gigabit ports, DHCP Server capability and IGMP communications protocol. MuxLab recommends using the Cisco SG300 Series Managed Switches.

The MuxLab Pro Digital Network Controller (500811) is available to simplify the configuration and utilization of the MuxLab IP based products via an Ethernet web interface, and supports third party management via smartphone and tablet.

Applications:Commercial and residential AV systems, classroom projector systems, digital signage, boardroom systems, collaborative PC systems, and medical information systems.

Note: This device supports PoE (PD), and is intended to be powered via a PoE (PSE) Ethernet Switch. If a PoE (PSE) Ethernet Switch is unavailable, then the power supply (500992) may be purchased separately.

MuxLab 500752-RX HDMI over IP Extender with PoE Features:

  • HDMI 1.3
  • Supports up to 1080p resolutions
  • Motion JPEG compression with Very low latency
  • Supports 100's of Transmitters and Receivers, depending on network bandwidth
  • Supports point-to-point, point-to-multipoint and multipoint-to-multipoint applications
  • Transmission up to 330ft (100m) over Cat5e/6
  • Up to 390ft (120m) between the TX and RX
 when no LAN switch is used
  • Supports IR transmission for remote control
  • PoE powered
  • Control via any web device (mobile, tablet) with use of model 500811 (Pro Digital Network Controller)

Why not buy this MuxLab 500752-RX HDMI over IP Extender with PoE today?



Specs

MuxLab 500752-RX HDMI over IP Extender with PoE

Environment HDMI 1.3a, Ethernet, IGMP
Bandwidth 225 MHz
Compression MJPEG
Bit Rate 60 Mbps
Latency 1 frame; 33 ms latency at 30 fps
Network Requirements Point to Point: 100BaseT, Multipoint: 1000BaseT
IR Frequency 38 kHz
Configuration Options Point-to-point, point-to-multipoint, multipoint-to-multipoint (for multipoint-to-multipoint the gigabit Ethernet switch must support the IGMP communications protocol)
Connectors 1x HDMI
1x RJ45S for Cat 5e/6 unshielded or shielded twisted pair via 10/100BaseT
1x 3.5 mm jack for IR emitter/sensor
DIP Switch 4-digit/position DIP switch for device ID addressing
Transmission Distance Based on a maximum length of 6.6 ft (2 m) of HDMI cable per end:

Cat 5e/6: 328 ft (100 m) up to 1080p (Gigabit Ethernet required for 1080p)

When installed in an electrically noisy environment, an STP cable must be used. Also, cross-connection reduces the effective distance depending on the grade of twisted cable used.
HDCP Yes
RJ45 Pin Configuration Reverse polarity sensitive; use EIA/TIA 568A or 586B straight-through wiring:

Pin 1 (R) Pin 2 (T)
Pin 3 (R) Pin 6 (T)
Pin 4 (R) Pin 5 (T)
Pin 7 (R) Pin 8 (T)
Required Cabling 1 x Cat 5e/6 or better twisted pair
1 x HDMI
Power Supply 110-240 V / 5 VDC power supply (available separately)
Power Consumption 2.9 W
Operating Temperature 32 to 104˚C (0 to 40˚C)
Storage Temperature -4 to 185˚C (-20 to 85˚C)
Humidity Up to 95%, non-condensing
Enclosure Metal
Compliance Regulatory: FCC, CE, RoHS; Flammability: 94V0
Dimensions 3.7 x 3.7 x 1" (9.4 x 9.4 x 2.5 cm)
Weight 1.1 lb (0.5 kg)
Reviews

Similar

Make Offer

Videos

3D

Q/A

Pictures

Ask a Question

Questions & Answers


Ask a question about the MuxLab 500752-RX HDMI over IP Extender with PoE or Call 800-841-9238

Your email:
Your question:
Software

FAQ

OEM

MuxLab 500752-RX HDMI over IP Extender with PoE

Recently Viewed Items

HDTVSupply.com