MuxLab 500702 LongReach HD-SDI Extender Kit (Transmitter/Receiver)
The MuxLab 3G-SDI Extender Kit allows 3G-SDI signals to be transmitted up to 330ft / 100m via single Cat5e/6 cable in a point-to-point configuration. The 3G-SDI Extender Kit supports transmission of up to 2.97/3.0 Gbps uncompressed, un-encrypted digital video (optionally including up to 32 channels of embedded Audio and/or embedded Time Code) within television facilities and between professional video equipment.
NOTE: This product has been discontinued. See the above SIMILAR Tab for equivalent products or, if not there, call us at 833-WOLFPACK (833-965-3722) right now to discuss your needs.
The LongReach 3G-SDI Extender Kit (model 500702) features extended distance transmissions up to 500ft / 150m, LED diagnostics for sync, signal detect and supports transmission of up to 2.97/3.0 Gbps uncompressed, un-encrypted digital video within television facilities and between professional video equipment.MuxLab 500702 LongReach HD-SDI Extender Kit (Transmitter/Receiver) Features:
- Supports SDI-SMPTE 259M-C (270Mbps), HD-SDI-SMPTE 292M (1.485, 1.485/1.001 Gbps), HD-SDI-SMPTE 424M/425M (2.97/3.0 Gbps)
- Up to 330ft / 100m via single Cat5e/6 at all resolutions
- Up to 500ft / 150m via single Cat5e/6 at all resolutions (model 500702)
- Supports up to 32 channels of embedded Audio and/or embedded Time Code
- LED diagnostics; sync, signal detect
- Cast aluminum enclosure
Why not buy this MuxLab 500702 LongReach HD-SDI Extender Kit (Transmitter/Receiver) today?
MuxLab 500702 LongReach HD-SDI Extender Kit (Transmitter/Receiver)
- Environment: SDI Single Link: SD, HD, and 3G
- Devices: Monitors or any equipment supporting SDI single link
- Standards: SMPTE 259M (270 Mb/s), SMPTE 292M, and SMPTE 424M
- Bit Rates: 270 Mb/s, 1.485 Gb/s, and 2.97 Gb/s (automatic selection)
- Formats
- SD:525i, 59.94 Hz & 625i, 50 Hz
- HD:1035i, 60 Hz & 1080i, 50 Hz & 1080p, 30 Hz &
- 1080i, 60 Hz & 1080p, 25 Hz & 1080i, 50 Hz & 1080p, 24 Hz & 720p, 60 Hz
- 3G:1080p, 4:2:2, 10b, 60Hz & 1080p, 4:2:2, 10b, 50Hz &
- 720p, 4:4:4:4, 10b, 60Hz & 720p, 4:4:4:4, 10b, 50Hz &
- 1080p, 4:4:4:4, 10b, 30Hz & 720p, 4:4:4:4, 10b, 30Hz &
- 1080p, 4:4:4:4, 10b, 25Hz & 720p, 4:4:4:4, 10b, 25Hz &
- 1080p, 4:4:4:4, 10b, 24Hz & 720p, 4:4:4:4, 10b, 24Hz &
- 1080i, 4:4:4:4, 10b, 30Hz & 1080i, 4:4:4:4, 10b, 25Hz &
- 1080p, 4:4:4, 12b, 30Hz & 1080p, 4:4:4, 12b, 25Hz &
- 1080p, 4:4:4, 12b, 24Hz & 1080i, 4:4:4, 12b, 30Hz &
- 1080i, 4:4:4, 12b, 25Hz & 1080p, 4:2:2, 12b, 30Hz &
- 1080p, 4:2:2, 12b, 25Hz & 1080i, 4:2:2, 12b, 30Hz &
- 1080i, 4:2:2, 12b, 25Hz
- Only LEVEL A MAPPING is supported
- Indicators: Power SDI Sync RJ45 Link
- Connectors
- 1 x BNC 75 Ohm female
- 1 x RJ45S for Cat5e/6 unshielded twisted pair
- 1 x Power connector (0.1" / 2.0 mm)
- Maximum Distance
- UTP Cat5e: 500' (152 m)
- UTP Cat6: 500' (152 m)
- RJ45 Pin Configuration
- Pin 1 (R), Pin 2 (T)
- Pin 3 (R), Pin 6 (T)
- Pin 4 (R), Pin 5 (T)
- Pin 7 (R), Pin 8 (T)
- Cables
- 1 x Straight Cat 5e/6 twisted pair cables required
- 2 x 75 Ohm coax cables with 75 Ohm BNC required
- Power Supply: 2 x 100 to 240 VAC / 12 VDC / 15 W power supplies with interchangeable blades for NA, Europe, and UK
- Power Consumption
- Transmitter: 4 W
- Receiver: 8 W
- Operating Temperature: 0 to 104˚F (0 to 40˚C)
- Storage Temperature: -4 to 185˚F (-20 to 85˚C)
- Humidity: Up to 95% non-condensing
- Enclosure: 6061 aluminum alloy
- Compliance
- Regulatory: FCC, CE, RoHS
- Flammability: 94V0
- Dimensions: 4.5 x 3 x 1.25" (11.4 x 7.6 x 3.2 cm)
- Weight: 2.5 lb (1.1 kg)
