This MuxLab 500101 Active CCTV Transmitter Balun provides enhanced distance performance for a single CCTV video channel via Cat5 unshielded twisted pair (UTP) cable. The balun is installed at the CCTV camera and is powered by the camera power supply. There are two (2) models; 500101 for 12VDC cameras and 500101 for 24VAC cameras. Maximum distance supported ranges from 0 to 3,000 ft via Cat5 UTP when connected to passive CCTV baluns at the receiver. Active CCTV Transmitter Balun features ground loop isolation and manual gain compensation adjustment based on cable length. Applications; Video enhancement for color, sharpness and brightness. Ground loop sensitive installations. Marginal cabling installations.
NOTE: This product has been discontinued. See the above SIMILAR Tab for equivalent products or, if not there, call us at 833-WOLFPACK (833-965-3722) right now to discuss your needs.
MuxLab 500101 Active CCTV Transmitter Balun Features:
Low power consumption
Derives power from camera power supply
Ground loop isolation
Gain compensation switch for 500 to 3,000 ft
Fits inside CCTV dome cameras and back boxes.
Works with other MuxLab CCTV baluns
Cable strain relief
Why not buy this MuxLab 500101 Active CCTV Transmitter Balun today?
MuxLab 500101 Active CCTV Transmitter Balun Specification
Video Format : NTSC, PAL, SECAM
Application : CCTV cameras, DVR, IP camera encoders, monitors, switchers and multiplexers
Transmission : Transparent to the user
Bandwidth : DC to 8 MHz
Maximum Input : 1.2Vp-p unbalanced
Maximum Output : +/-5V balanced
100kHz: Variable from 2 dB to 7 dB
5MHz: Variable from 13 dB to 40 dB
Return Loss : Greater than 15 dB @ 1MHz
Ground Loop Isolation : Isolation between video input and output up to ± 5V
Common Mode Rejection
15 kHz: 60 dB typ
8 MHz: 40 dB typ
Up to 3,000' (914 m) with passive balun (500009) at receiver
Up to 6,000' (1,828 m) with active balun (500015 or 500120) at receiver
Gain Compensation Switches : Four (4) settings based on cable length Factory setting: 750' to 1,500' (229 m to 457 m)
24 gauge or lower solid copper twisted pair wire impedance: 100 ohms at 1 MHz
Maximum capacitance: 20 pf/foot. Attenuation: 6.6 dB/1,000' (305 m) at 1 MHz
Impedance: 75 ohms at 1 MHz (RG59/U mini coax)
Connectors : (reverse polarity sensitive) : BNC-M for video with 8" (203mm) mini coax lead 2-wire red/black cable lead for input power Two (2) screw terminals for video twisted pair
Input: 75 ohms (BNC)
Output: 100 ohms (screw terminals)
12VDC @ 60mA max
Shares power with camera PSU. Connects to camera's power terminals.